What is the best way to add a large number dynamic VI's in the application builder?

Is there a way to add all the VI's in a directory tree or library file as "Dynamic VI's" in the application builder (7.1 on Windows XP SP2)?
Thanks,
Mark Moss

LabVIEW 7.1: From what I can tell, you can only add dynamic VIs one file at a time, while for support files, you can add entire folder contents.
Have you considered uprading to LabVIEW 8.0? Things like this have been improved dramatically! You can keep all your dynamic VIs in a project folder, then add it to the build specification in one click.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Which is the best way for posting a large number of records?

I have around 12000 register to commit to dababase.
Which is the best way for doing it?
What depends on ?
Nowadays I can't commit such a large number of register..The dabatase seems hanged!!!
Thanks in advance

Xavi wrote:
Nowadays I can't commit such a large number of registerIt should be possible to insert tens of thousands of rows in a few seconds using an insert statement even with a complex query such as the all_objects view, and commit at the end.
SQL> create table t as select * from all_objects where 0 = 1;
Table created.
Elapsed: 00:00:00.03
SQL> insert into t select * from all_objects;
32151 rows created.
Elapsed: 00:00:09.01
SQL> commit;
Commit complete.
Elapsed: 00:00:00.00
I meant RECORDS instead of REGISTERS.Maybe that is where you are going wrong, records are for putting on turntables.

What is the best way to add text to an image

I used the draw ap div to add text to an image. will that cause any problems? If so, what is the best way to add text to an image? Thanks!

APDivs will kill your design unless you fully understand the css behind the scenes and plan accordingly. They really are completely unnecessary in the vast majority of situations.
An easy way to add "web text over an image" would be to use the background-image attribute in css for a standard <div> tag, then just add the text within that same <div>.
Something like this in the css (if you are using a 300x300 pixel image)...
#yourdiv {
     background-image:url(yourpic.jpg);
     width:300px;
     height:300px;
And then this in the html...
<div id="yourdiv">Your text here</div>
You would then position the <div> using css margins, floats and padding. Using position:absolute (APDivs) is typically something that will blow your design to pieces if the viewer changes their browser settings.

What is the best way to add hard disk space to macbook pro?

I'm running out of disk space on my macbook pro. What is the best way to add disk space?

another way of doing it is to replace your hard drive with a larger one.
if you're technically capable, it takes 10 minutes for the swap and an hour minimum to clone your hard drive or do a data transfer. all depends on how much data there is to trandfer or to clone.
good luck.

What is the best way to add libraries to a project?

What is the best way to add technologies to ADF? For example log4j. Or does the embedded logger have log4j features?

HI,
Hope helpful
http://technology.amis.nl/blog/8380/manage-jdeveloper-external-libraries

What is the Best Way to add a shopping cart?

What is the best way to add a shopping cart?
Thanks.

See that field at the top right that says "Search Forums"? Try Dreamweaver shopping cart. You'll get a lot of answers.

What is the best way to share a iTunes library between 5 users on the same computer?

What is the best way to share a iTunes library between 5 users on the same computer?
Currently I have a common itunes library in a shared folder that each user is linked to. The problem is that when one user adds music to the shared file, it does not automaticaly appear to other users when they open their iTunes. They have to go to the shared library and select the new music in order to make it visable in their iTunes.
Would iTunes file shareing fix this problem?
Thanks

aapl.up wrote:
Rick, are you saying that if you try to share a folder outside of home and use sharepoints, then the other mac wont prompt you to log in? Have you tried that? It is hard to believe that is the case
I am sort of saying that. Have you tried it? I know it's hard to believe, but you really need to help us out by trying some steps that you don't believe.
We can't see what your exact situation is. We sort of know what's worked for us out here. Just trying to help you get this going in less than 24 hours!
Sharepoints manages the samba configuration file. It's free software that puts a pretty face on an otherwise cumbersome config file.
Give it a shot.
windows will not prompt for passwords, I have tried this with multiple computer at home for both vista and xp
As I stated. You will not get prompted on windows, if you have set up sharing in an insecure fashion. You are not using a secured sharing situation.
No argument with your statement.

What is the best way of compressing a large 3 hour final cut file

What is the best way of compressing a large 3 hour final cut file. I shot the play and it is in final cut and I rndered it so now I have a 22gb file that I need to put on a dvd . Any suggestions
Thanks
Macbook Pro
2.3 GHz Intel Core i7
with Final Cut Pro 7.0.3
using Lion as operating system

Presuming your menus aren't complicated(include audio or video) the total size for the MPG-2 and AC3 files should probably be under 8GB for a dual layer disk. The inspector will tell you the estimated size. 2-pass varible bit rate would be recommended.
Trying to fit 3 hours on a DVD-5 will only bring very noticable quality hits. Compressor will let you change the average bit rate so that you can fit 174 minutes but trade-off isn't worth it in my opinion.
Be aware that dual-layer -R and +R media may not play well for everyone everywhere.
I presume you are not making 1000 or more copies? If you were replication could solve this.
One other alternative would be to break-up the show into two parts and spread it across two DVD-5s.

What is the best way to format a novel w headers w/o changing the ...

what is the best way to format a novel w headers w/o changing the following pages. I've used Microsoft office initially, but publishing house uses a program called word perfect. I find that I have too many blank white pages no matter what i do! Have to fix pagination as well...Paul

When you start you are offered templates under 2 categories "Word Processing" and "Layout", choose wisely.
For header and footers yes, you will have to:
+Menu > Insert > Section break+ at the bottom of the last page of the section you wish to preserve.
Then you can change the next section and the 2 will stay different.
Please read the Pages09_UserGuide.pdf, you need to know a lot more than this if your novel is ever to hit the streets.
Peter

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
Thanks for any help

Hi Donavan,
There are two options for zeroing with the NI-9237. You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
See the Bridge Balancing, Offset Nulling section in the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements. See the above tutorial to consider the tradeoff in accuracy between these two options.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

What is the best way to create a read more/collapse text box on the homepage of a site?

What is the best way to create a read more/collapse text box on the homepage of a site?

I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

What is the best way to track a stolen ipod touch 4th generation if the locations services are off

What is the best way to tracker a stolen ipod touch 4th generation it the locations services are off

you will have to use the old fashioned way, like if you lost a wallet or purse.

What is the best way to erase my computer for personal stuff while leaving the computer ready to use

what is the best way to erase my computer for personal stuff while leaving the computer ready to use

If the Mac came with Mountain Lion or Lion, press Command, Option and R keys on boot, open Disk Utility, erase the disk and reinstall Lion or Mountain Lion. If it came with Snow Leopard or older, insert the DVD, press C key on boot, go to Utilities > Disk Utility, erase the drive and reinstall Snow Leopard

What is the best way to handle very large images in Captivate?

I am just not sure the best way to handle very large electrical drawings.
Any suggestions?
Thanks
Tricia

Is converting the colorspace asking for trouble? Very possibly! If you were to do that to a PDF that was going to be used in the print industry, they'd shoot you! On the other hand, if the PDF was going online or on a mobile device – they might not care. And if the PDF complies with one of the ISO subset standards, such as PDF/X or PDF/A, then you have other rules in play. In general, such things are a user preference/setting/choice.
On the larger question – there are MANY MANY ways to approach PDF optimization. Compression of image data is just one of them. And then within that single category, as you can see, there are various approaches to the problem. If you extend your investigation to other tools such as PDF Enhancer, you'd see even other ways to do this as well.
As with the first comment, there is no "always right" answer. It's entirely dependent on the user's use case for the PDF, requirements of additional standard, and the user's needs.

What is the best way to add external C++ code to LabView 6.1?

I have various C++ class-based DLL's written with Visual Studio 6.0 and wish
to create instances of these C++ classes and call their methods in LabView
6.1. What is the best way to do this?
It seems based on the little reading I have done that there are two choices:
1. Wrap the C++ class as a simple COM control and use LabView's COM based
VIs to create a COM object and access the methods of various interfaces.
2. Wrap the C++ class methods as C functions and a "constructor" and
"destructor" C function to create and destroy an instance of the class. Then
use LabView's DLL call support.
Which is best? What direction is LabView going to take that better supports
the notion of C++ class libraries?
Thanks,
Te
rry

You could also try using a CIN. This is a tool that LabVIEW provides for interfacing with external code.
The CINTools libraries of LabVIEW allow you to embed compiled C code into a particular Virtual Instrument (VI) using a CIN.
In order for LabVIEW to be capable of calling compiled functions of C from a running VI, the code must be loaded and unloaded into memory at the same time as the VI code itself. LabVIEW uses object code in the form of a .lsb file which is generated by the C compiler from the C source code using the ntlvsbm.mak file. This ntlvsbm.mak file is included in the CINtools directory in the LabVIEW folder. You also must create another .mak file which includes parameter definitions for the ntlvsbm.mak file and also includes a call to the LabVIEW .mak file.
The generic documentation for CINs only explains how to use them to call C compiled code from a LabVIEW VI. It shows several development environments such as Visual C++, but in essence it only allows the user to create .lsb files out of plain C source code ( .c ) through C compilers on those environments.
The question now is how can I create .lsb files from C++ native source code using a C++ compiler. Furthermore, how can I create a .lsb file from several C++ source code files (.cpp) and make calls to C++ functions from a VI using CINs? The following explains how to do this:
1) Drop a Code Interface Node (from the Advanced Subpalette of the Functions Palette) into the LabVIEW VI. Make sure to wire the inputs.
2) Right-click on the CIN and choose "Create.c File...", then in the file dialog box specify a "name.cpp" file name. (very important: use .cpp extension)
3) Then create a name.mak makefile (text file) and add the following lines :
name=name_of_cpp_file_without_the_extension
type=CIN
cinlibraries=Kernel32.lib
CINTOOLSDIR=path_to_cintools_directory
!include <$(CINTOOLSDIR)\ntlvsb.mak>
4) Go into Visual C++ and File>Open and open the .mak file. You can even Add the name.cpp file to the project to make it easier to edit. Select that name.cpp or open it as a text file in NotePad or and edit the prototypes of the CIN MgErr functions as shown below, adding extern "C" at the beginning of the line. extern "C" CIN MgErr CINRun(float64 *INPUT);3) Select Build.exe to create the "name.lsb" file. To import the .lsb into LabVIEW, right-click on the CIN and choose "Load Code Resource...". Then, choose the name.lsb file and it is ready to run!
If you want to use several C++ source code files with .cpp extensions, then compile them in Visual C++ and link them to name.cpp and create a .lsb by modifying the name.mak as follows:
name=name_of_cpp_file_without_the_extension
otherobj=other_cpp_files_BUT_USING_.obj_extension
type=CIN
cinlibraries=Kernel32.lib
CINTOOLSDIR=path_to_cintools_directory
!include <$(CINTOOLSDIR)\ntlvsbm.mak>
It's worth a try? I have also heard of using clusters to represent classes, so you could check that out.
J.R. Allen

What is the best way to add a large number dynamic VI's in the application builder?

Similar Messages

Maybe you are looking for