What is the difference between Azure RemoteApp Basic vs Standard Plans in terms of compute cores and memory?

So our customer has asked us to compare compare Amazon Workspace and Azure RemoteApp offerings for them to choose from. While looking at Amazon Workspace, it clealy defines bundles with specific CPU cores, memory and user storage. However, Azure RemoteApp
only specifies user storage and vaguely compares its basic vs. standard plans in terms of "task worker" vs. "information worker"
I tried looking up its documentation but couldn't find specific CPU cores that are dedicated per user in basic vs. standard plans. I have following questions:
Can anyone point me in the right direction or help understand how many CPU cores and memory are dedicated (or shared) per user in each plan?
Our customer would most likely need a "custom" image for their custom apps. Is it possible for us to choose specific CPU cores and memory for the users to be able to run their apps in azure remoteapp?
In case i am misunderstanding the basic difference between AWS workspace and Azure RemoteApp, i'd appreciate some help in understanding it as well.
Thanks!

Hi,
With Azure RemoteApp users see just the applications themselves, and the applications appear to be running on their local machine similar to other programs. With Workspaces users connect to a full desktop and launch applications within that.
1. Azure RemoteApp currently uses size A3 Virtual Machines, which have 4 vCPUs and 7GB RAM. Under Basic each VM can have a maximum of 16 users using it whereas under Standard each VM is limited to 10 users. The amount of CPU available
to a user depends on what the current demands are on the CPU at that moment from other users and system processes that may be on the server.
For example, say a user is logged on to a VM with 3 other users and the other users are idle (not consuming any CPU). At that moment the user could use all 4 vCPUs if a program they are running needed to. If a few moments later
the other 3 users all needed lots of CPU as well, then the first user would only have approximately 1 vCPU for their use. The process is dynamic and seeks to give each user their fair share of available CPU when there are multiple users demanding CPU.
Under the Standard plan a user will receive approximately a minimum of .4 vCPU assuming that the VM has the maximum number of users logged on and that all users are using as much CPU as possible at a given moment. Under the Basic plan the approximate
minimum would be .25 vCPU.
2. You cannot choose the specific number of cores and memory. What you can do is choose the Azure RemoteApp billing plan, which affects the user density of each VM as described above. If you need a lower density than Standard you
may contact support.
-TP

Similar Messages

What is the difference between mouton lion, lion, snow leopard? I have an iPad, iPhone and iMac but I have no idea what you would use these for?

What is the difference between mouton lion, lion, snow leopard? I have an iPad, iPhone and iMac but I have no idea what you would use these for?

Probably. Back up your data and check your applications for compatibility before installing it.
(111162)

What are the differences between Azure(Cloud) Service Bus and On-Premises Service Bus (Windows Service Bus 1.0)?

Hi,
I want to know the exacts differences between Windows Azure(Cloud) Service Bus and On-Premises Service Bus (Windows Service Bus 1.0)
Thanks
mit

Might ask them over here.
http://social.technet.microsoft.com/Forums/en-us/home?category=biztalkserver
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?forum=windowsazuremanagement%2Cservbus%2Cazuremobile&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

What is the difference between wiring a datasocket reference or a datasocket URL into Datasocket Read and Write VIs?

Which is better? To wire a URL or a reference into Datasocket read/write?
Does wiring in the reference save processor effort/time? Do I have to close the DS reference before I can do other things to either the same DS connection or other connections? The examples I have looked at tend to use URL's, why is this?
(I am running Labview 7.0 on Windows 2000)

I'd like to bring this thread back up because I'm having the same issue as Michael here.....
I'm stumped on a the functionality of the Read/Write mode for the Datasockets Open VI.
I've attached a picture below showing the 2 different methods of
opening Datasocket references....In one case, I use the Read/Write mode
for DS open, in the other case, I use 2 DS opens: One for READ and
another for WRITE. For some reason, only the latter program works
properly (when I open READ and WRITE separately). Why is this?
I
thought that if the READ/WRITE MODE was used, the output reference can
be used with the Datasocket READ and Datasocket WRITE Vi's as shown in
Top Vi of picture. Instead, It seems I'm unable to "change" the state
of the Datasocket tag using the the Top Vi.
FYI: I'm using
DS server manager to create the item. I've also gave proper privileges
to each computer so that they can communicate with the DS server. It
obviously works since using the bottom VI, I get the desired results.
What am i doing wrong? Are my expectations for the Rea/dWrite functionality correct?
Message Edited by RegisPhilbin on 07-15-2005 11:11 AM

Hi gurus what is the difference between EDI & ALE.

hi gurus what is the difference between EDI & ALE.

HI,
EDI is a technique used to communicate business and information transactions between computer systems of different companies and organizations. These transactions include such documents as purchase orders, invoices, inquiries, planning, acknowledgements, pricing, order status, scheduling, test results, shipping and receiving, payments, and financial reporting
EDI Introduction
The EDI interface is intended to connect an EDI subsystem with the SAP system. EDI subsystems perform the following tasks related to EDI processing:
1·Conversion of data·
2.Message and Interchange Handling.
3.Communication·
4.Administration of partner profiles·
5.Monitoring of processing
From the SAP side, the EDI interface is based on IDoc technology, which is independent of EDI standards. All data is transferred in files between the R/3 System and the EDI subsystem. Synchronous RFC (Remote Function Call) is implemented to define the time of transfer for a file between the two systems.
EDI u2013 Benefits
Improves data accuracy u2013
With EDI business can eliminate the need to re-enter data from paper documents and thus prevent potential data entry errors. Additionally, the cost of processing an electronic requisition is estimated to be one-tenth the cost of handling its paper equivalent
Lowers personnel costs-
EDI can help companies reduce the need for personnel involved in orders and accounting processing. Speeds up information exchange- EDI systems can shorten the lead time between receipt and fulfillment of orders. When scheduling information is transmitted with ordering data, companies can plan production more accurately and thus reduce stock investments.
Reduces technical complexity related to data interchange u2013
With EDI companies use standardized data formats to exchange documents. EDI allows companies using different business applications and systems to achieve computer-to-computer electronic exchange of business documents.
Application Link Enabling
ALE Objectives u2013 ALE incorporates controlled exchange of data messages ensuring data consistency across loosely coupled applications. ALE comprises of three layers. Application Services Distribution Services Communication Services
Basic principle of ALE is to provide a distributed and fully integrated R/3 system. Each application is self-sufficient. The use of self-sufficient system implies a certain measure of data redundancy.Hence data has to be both distributed and synchronized.
General Steps Involved in Configuring EDI u2013 ALE Interface
- Maintaining the Condition Table
- Maintaining the Access Sequences
- Maintaining the Output types
- Assign output types to the partner functions
- Maintain output determination procedure
- Assign output determination Procedures

What is the difference between Action & Workflow?

hi,
What is the difference between Action & Workflow?
regards,
babu

Hi,
Actions
Actions are important for maintaining and improving business relationships. You can schedule and start predefined processes with the Actions component by means of user-definable conditions from transaction and marketing objects.
You can tailor the type and time of actions to the requirements of your customers and the processes in your company. This component enables you to match your service, sales and distribution management, and your campaign management even more closely to customer needs, and, simultaneously, to automate them
In simple words Actions are automatic actions that are configured to occur in business transactions (activity, sales order, quotation etc.) as a result of particular condition like change of status to let us say "in process" from "open".
Workflow:
The automation of a business process, in whole or part, during which documents, information or tasks are passed from one participant* to another for action, according to a set of procedural rules.
*participant = resource (human or machine)
SAP Business Workflow is the R/3 tool for handling the process automation within R/3 or between R/3 systems and other systems involved in the business process. It is flexible enough to handle ad hoc processes such as the circulation of an electronic document. It is robust enough to handle mission critical process in the production system such as the creation of a material master.
The different R/3 applications supply standard workflows for the commonly occurring processes. Once these workflow templates are activated, they are ready for immediate use. A complete set of workflow tools, including the workflow editor and workflow generation wizard, are provided to enhance these standard workflows or create new workflows. These tools are complemented with transactions for monitoring, tracking and the statistical analysis of the processes.
Because the business process often does not step at the R/3 boundary, various interfaces and third party tools are available for extending the process across systems.

What's the difference between "login block-for X attempts X within X" and "security authentication failure rate X"?

What's the difference between, just for example, "login block-for 100 attempts 15 within 100" and "security authentication failure rate 3"?
Please ignore the numbers, I need to know what the differences are in commands and what they do, what they affect.

security authentication failure rate number_of_failed_attempts : A global configuration mode command used to specify the maximum number of failed attempts (in the range of 2 to 1024) before introducing a 15-second delay
login block-for 100 attempts 15 within 100 : Block all access after 15 failed login attempts within 100 Secs for the period of 100Secounds (1.40 Minutes).
The Cisco IOS Login Enhancements (Login Block) feature allows users to enhance the security of a router by configuring options to automatically block further login attempts when a possible denial-of-service (DoS) attack is detected.
The login block and login delay options introduced by this feature can be configured for Telnet or SSH virtual connections. By enabling this feature, you can slow down "dictionary attacks" by enforcing a "quiet period" if multiple failed connection attempts are detected, thereby protecting the routing device from a type of denial-of-service attack.

What's the difference between the two IE11 installers listed below?

Hello,
What is the difference between these two IE-11 downloads (image below)? One is 28MB and one is 54MB. I am having a lot of post-installation issues with the 54MB installer (i.e. opens blank pages, can't access a simple page like google, Windows search stops
indexing). When I install the 28MB download, (so far) I don't have any issues. Since the 28MB installation works, it sounds like my desision is easy but I would still like to know the difference between the two. BTW, the quick install is only 2MB, so I know
I don't have the quick install.
Any help would be appriciated, thank you in advance.
Sorry, for the spacing on the links below. This system won't let me add 'real' links until my account is varified.
28MB Installer Link
microsoft . com / en-us / download / details.aspx?id=40902
54MB Installer Link
windows . microsoft . com / en-us / internet-explorer / ie-11-worldwide-languages

Hi,
In my environment, they are the same size:
Alex Zhao
TechNet Community Support

What is the difference between Huawei S5700 versions?

What is the difference between Huawei S5700 Simplified (LI) Standard (SI) Enhanced (EI) Advanced (HI)?

Hi
Look here:
http://enterprise.huawei.com/en/products/network/switch/campus-switch/hw-131611.htm
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What si the difference between network, basic, premier, limited? [SOLVED]

Can someone explain me what is the difference between:
Enterprise Linux Network
Enterprise Linux Basic
Enterprise Linux Premier
Enterprise Linux Basic Limited
Enterprise Linux Premier Limited
thanks
m.

Those are all types of Support. You can purchase them at the Oracle Store;
http://oraclestore.oracle.com/OA_HTML/ibeCZzpHome.jsp?minisite=14405&respid=1435532&grp=STORE&language=US
Network:
get 24x7 access to a year worth of patches, fixes, and security alerts for Enterprise Linux 4 and Enterprise Linux 3 through the Unbreakable Linux Network (ULN). Phone and web based support is not included.
Basic:
You will have 24x7 access to log unlimited number of service requests either via the web or the phone. And you will receive access to patches, fixes, and security alerts through the Unbreakable Linux Network (ULN). Limited to certain amount of CPU's
Premier:
You will have 24x7 access to log unlimited number of service requests either via the web or the phone. And you will receive access to patches, fixes, and security alerts through the Unbreakable Linux Network (ULN). Unlimited CPU's
and so on.......

Basic data what is the difference between Version Dependent task and indep

In basic data settings what is the difference between Version Dependent task and version independent task. please give detailed explanation

Hope this link gives you the answer.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4b7aa453d11d189430000e829fbbd/frameset.htm
Best regards,
Sudhi

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

What's the difference between using a connection pool and a datasource

Howdy. I figure this is a newbie question, but I can't seem to find an
answer.
In the docs at bea, the datasource docs say
"DataSource objects provide a way for JDBC clients to obtain a DBMS
connection. A DataSource is an interface between the client program and the
connection pool. Each data source requires a separate DataSource object,
which may be implemented as a DataSource class that supports either
connection pooling or distributed transactions."
In there it says the datasource uses the connection pool, but other than
that, what is the difference between a connection pool and a datasource?

Thanks for the info. I think it makes some sense. But it's a bit greek.
I'm sure it'll make more sense the more I work with it. Thanks.
"Chuck Nelson" <[email protected]> wrote in message
news:3dcac1f5$[email protected]..
>
Peter,
Here is a more formal definition of a DataSource from the Sun site
"A factory for connections to the physical data source that thisDataSource object
represents. An alternative to the DriverManager facility, a DataSourceobject
is the preferred means of getting a connection. An object that implementsthe
DataSource interface will typically be registered with a naming servicebased
on the JavaTM Naming and Directory (JNDI) API.
The DataSource interface is implemented by a driver vendor. There arethree types
of implementations:
Basic implementation -- produces a standard Connection object
Connection pooling implementation -- produces a Connection object thatwill automatically
participate in connection pooling. This implementation works with amiddle-tier
connection pooling manager.
Distributed transaction implementation -- produces a Connection objectthat may
be used for distributed transactions and almost always participates inconnection
pooling. This implementation works with a middle-tier transaction managerand
almost always with a connection pooling manager.
Does that help clarify the distinction?
Chuck Nelson
DRE
BEA Technical Support

What is the difference between Azure RemoteApp Basic vs Standard Plans in terms of compute cores and memory?

Similar Messages

Maybe you are looking for