What is the main function of table S866
Hi all,
Does anybody know the function of table S866?
Regards,
Luke
Dear Julius,
These Evaluations/ Evaluation structure will be used only for LIS Reportings , like Report Painters/writers Of FI. Generaly we use these Evalucations for Flexible Analyses of S&D.
by using Where_userd list we cannt find out its usage.
Thanks and Regards
Prabhu
Similar Messages
-
Hi Folks,
I need to use the function module 'ISU_S_PAYSCHEME_ROLLIN_ROLLOUT'. what is the main functionality of this function module? there is no documentation available for this FM.
Thanks in advanceHi,
Plz follow the link below for answer of your question.
Link is: Re: how to call standard SAP method in the Custom Program ?
Thanks & Regards,
Sarita Singh Rathour -
What is the main function of thunderbolt in imac
2 weeks ago, i bought a new imac
i was wonder about what is the function of thunderbolt and i do not have the promis pegasus machine
so, what can i do with the thunderbolt if i have the only imacIt's not youtube but the following article may explain TB a bit more to you:
What you need to know about Thunderbolt
Also, when TB can be use to connect other TB devices, mini-displayport displays can also be connected to a TB port.
Confusing Mini DisplayPort with Thunderbolt -
What is the main function of RMS Emulator
Hi All,
A very good day to all.
I have a question with reference to RMS Emulator.
We know that RMS Emulator acts as a backward compatibility for Legacy management packs. What i want to make it clear is among both the points which one is true and which one is false or are both true?
1. Does RMS Emulator provide compatibility to legacy management pack when we Import a management pack normally from the Administrator TAB in SCOM 2012 OR 2012 R2 where there is no SCOM 2007 R2 installed or existing in that management group.
Or
2. Does RMS Emulator provide compatibility to Legacy management packs when a new SCOM 2012 or 2012 R2 is deployed in a existing management group where we already have a SCOM 2007 or 2007 R2.
Gautam.75801Hi Ivan,
The article was really very helpful, But it clearly does not answer my question. For the below which is true among RMS emulator 1 or 2 or are both true ?
1. Does RMS Emulator provide compatibility to legacy management pack when we Import a management pack normally from the Administrator TAB in SCOM 2012 OR 2012 R2 where there is no SCOM 2007 R2 installed or existing in that management group.
Or
2. Does RMS Emulator provide compatibility to Legacy management packs when a new SCOM 2012 or 2012 R2 is deployed in a existing management group where we already have a SCOM 2007 or 2007 R2.
Gautam.75801 -
What are the main tables using in vendor performance report.
what are the main tables using in vendor performance report.
how many select statements are in ABAP reports.Refer the links -
vendor performance report !!!
vendor performance report
vendor performance report
I need standard vendor performance report
Regards,
Amit
Reward all helpful replies. -
What are the main tables to refer in ASAP(asap 7.2)?
what are the main tables to refer in ASAP(asap 7.2)?
what are the main tables to refer in ASAP(asap 7.2)?
-
What are the main tables of SITs?
Hi
What are the main tables of SITs? How can I find out the tables related to SITs?
Regards
RahmanPER_SPECIAL_INFO_TYPES: This table holds the definitions of SITs that are available to each Business Group. Each special information type is a user defined structure for the personal analysis key flexfield. The name of the special information type is the same as the name of the corresponding key flexfield structure.
PER_SPECIAL_INFO_TYPES_V : This table has the Employee's SIT info. A supplementary view used to simplify forms coding
PER_SPECIAL_INFO_TYPES_V2 : A supplementary view used to simplify forms coding. -
What are the main sap script events and their functionality and usage?
what are the main sap script events and their functionality and usage?
Hi,
Inside the Script, there are events like Top of Page, End of page etc.
Please elaborate about your requirement.
Best regards,
Prashant -
What is the main use of mseg table
what is the main use of mseg table. when we should actually use this. please explain me in detail. then what is the difference betweeln mseg and mara table.
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
Go thro this link, u will get a clear picture abt the MM flow.
MM flow
MM flow
MM flow
<b>Reward Points if it is helpful</b>
Thanks
Abhay Singh. -
What is the mathematical function associated to linear, map ranges, polynomial, table scale? I'd like to use the scale of daqmx for use with other types of data.
yes, refer to the help, but only found information on the first option "linear". what I intend to is to be able to climb a number, using one of the existing scales, but don't be that mathematical function is necessary to use.
-
What are the different functions used in sap script?
Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Maheshhe print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'. -
What is the main diff b/n ldb pnp and pnpce?
hi ,
what is the main diff b/n ldb pnp and pnpce?
thanks.Hi Arun,
PNP/PNPCE - Both are Logical Databases for PA Module
In PNPCE - CE stands for Concurrent Employment.
The differnces are:
The PNPCE logical database supports the evaluation of HR master data. It includes the functions of the PNP logical database and offers additional evaluation options. Therefore, you should use the PNPCE logical database instead of the PNP logical database for all new developments.
The enhanced functionality of PNPCE in comparison to PNP essentially concerns the evaluation of Concurrent Employment, that is the possibility to group evaluate several assignments/personnel numbers of a person. The new events 'GET PERSON' and 'GET GROUP' as well as an enhanced syntax for the INFOTYPES statement (addition AS PERSON TABLE) for the procurement of infotype data enable you to use the new functionality. The use of these new functions is optional. You can run a PNPCE report that does not use the new events and the addition for the INFOTYPES statement in a PNP-compatible session. Since the PNPCE also has an improved selection screen, each report benefits from this even if the report does not use the functions for evaluating Concurrent Employment.
Hope this helps you.
Regards,
Chandra Sekhar -
What is the main use of domain other than providing technical attributes
frends let me know what is the main use of domain other than providing technical attributes
hi RajaReddy,
Domains are used to
<b><u>1. specify fixed value ranges.</u></b>
For eg: <b>status type Char 1</b>, can have fixed values stored in the domain level
as '1' - Active '2' - retired '3' - terminated '4'- temporary..etc
<u><b>
2. Conversion routines are attached at domain level</b></u>
<u>
Conversion routine <b>MATN1</b> (connected function modules are CONVERSION_EXIT_MATN1_INPUT
CONVERSION_EXIT_MATN1_OUTPUT), is attached for domain MATNR
<b>3. Value table are atttached at domain level (if fixed value ranges are not mentioned)</b></u>
for eg: value table mara is attached for Domain MATNR.
<u><b>
4. And most importantly, domains can be re-used for multiple data elements, in the same table.</b></u>
Hope this helps,
Sajan Joseph. -
Hello All,
What is the main use of SM13. I know the SAP definition tha tit is used to check"whether update is active".
So if the transactions are struck here,can we manually process them?
I see a couple of records with Status V2. When I try to manually update them, the system gives me a message"Update request does not have status init". What does this mean.
What would be the document change flow to delta queue. Is it as below?
In case of V3 updates,
1)The user make changes to a document.
The changes are made to application tables in V1 step-VBAK,VBAP etc
2)The delta(after and before image is captured in the log tables---How is this done?
3)The changes(before and after images) from the log table are moved to extarction queue in V2 step using function modules
4)In SM13, if you see the transactions in V2 status ,does it mean that the FM are not yet executed
5)once v2 is complete(FM' run) the delta is moved from log table to extraction queue, v3 init is run
6)all the accumulated changes are moved from extraction queue to delta
Thanks
SimmiHi,
Check if the following threads help :
sm13 and lbwq
Re: SM13 Best Practices?
Cheers,
Kedar -
What is the main difference between these two api
Hi
I am using portal 3.0.9.8.1 under NT environment.
I am planning to change the user's password programmatically.
Could someone advise me about the difference between these two
api:
wwsso_api_user_admin.change_password and
wwsso_api_user_mgr.change_password
Are these api the same?Are they affecting the same table?
Thanks in advance for any clarification
RegardsMichelle1892773 wrote:
What is the main difference between LOCAL VARIABLE, REFERENCE, PROPERTY NODE and INVOC. NODE?
Can u show this with an example in a VI using all these?
Basic overview. Someone can go into more depth if they want.
Local Variable - Correlates to some location in memory that holds information. Based on the data type, it looks at that location and interprets the 1's and 0's as either a double, integer, string, structure(cluster), etc.
Reference - ill leave the details of this to someone else I can't give a decent explanation.
Property node- sets different "properties" of a control/indicator etc. One of the properties is value so that works similar to a local variable. However, you can set much more than that. For example, with controls you can set the property of visible, not visible, color, etc etc.
Invoke node - invokes some "method." i.e. calls some function to act on something
These may not be the best explanations, or even 100% correct. But it should get you started. I'm sure someone else will build on this.
CLA, LabVIEW Versions 2010-2013
Maybe you are looking for
-
Adding user defined field in print layout design of Bill of matrial Report
I want to add "Drawing No" which is user defined field in Bill of Material report need immediate help .
-
Hi Gurus, My BI system is single client and its currently connected to ERP Config Client. I have activated all my data sources and all source system connections are established from the same ERP config Client. Now we want BI to connected to ERP Dev C
-
how do i authorize my computer. It is telling me that there are no computers authorized and it wont let me authorize mine. I already signed into my itunes.
-
Still getting error message 7.....
I am current on my windows updates and running SP3. Everytime I DL and install then try to open itunes I get the error 7 telling to reinstall. I've tried everything I have read on here unless I missed something. I trid just quicktime and that tells m
-
Disabled keyboard shortcuts in adobe applications
My employer provides Mac OS X 10.4.11. I am not in a position to upgrade this, therefore cannot go beyond Firefox 3.6.25. I have recently found keyboard shortcuts in Adobe Photoshop (7) and Illustrator (10) do not work when I'm logged in to my hotmai