Adding user defined field in print layout design of Bill of matrial Report

I want to add "Drawing No" which is user defined field in Bill of Material report need immediate help .

Hi,
If you add the UDF in BOM-Title then the UDF will be in OITT table.
If you add the UDF in BOM-Rows then the UDF will be in ITT1 table.
You will find BOM-Title or BOM-Rows in Production Module (ie., in User Defined Fields --> Manage User Fields)
In PLD, You can print the UDF if you search in the above said tables.
Raja.S

Similar Messages

User defined fields in Crystal layout

Hi All,
I want to add user defined field values in crystal layout for Sales order, but its not listed in RDR1 tables there but it's available in SAP query manager view. How can i get that in Crystal reports. please suggest on this.
Regards
Sree

You can then remove the key and the fields in the database will keep their correct definitions rather than varchar(max) which is causing the initial problems.
Adding extra keys may uause performance issues if you leave them there for a large table.
I have also had issues of varchar(max) fields causing database connection issues when running the reports in 8.81 PL07.
Rob

User defined Query in Print Layout

Is it possible to print output of a user defined query in a Print Layout. For example: in Quotation
Kentish

Thanks for your input.
But its not related to Query Print Layout. I wanted to print a query result in a Sales Quotation so that when you print the Sales Quotation, you get the result of the Query on the Sales Quotation
Thanks
Kentish

Rounding up values in Print Layout Designer

The customer has a database field in print layout designer and this is bringing back a value such as 0.25. They would like to create another field which shows this value rounded up to the nearest whole number, ie in the case of 0.25 they would like to see 1.
They have created a formulae field and used the round function, however this rounds the value down to the nearest whole number as per the general rounding rule i.e. round it down if it is below .5 and up to the nearest whole number when it is above .5
Is there anyway to achieve this using Print Layout Designer in SAP Business One 2007 A?

Hi Samantha,
Apologies for the delay.
Yes, its possible to do this. Firstly, you will need to use the fields from my earlier post. However you will also need to add some more formula fields
The first formula field will work out what the numbers are to the right of the decimal point:
DecimalRight(Field_101)
Field_101 in your case will be the field ID for the quantity field and the field ID for the above formula field will be Field_102.
The second formula field will work out if the quantity is a whole number, here the field id will be Field_103:
Field_102==' '
The third formula field will work out if the quantity is not a whole number, here the field id will be Field_104:
Field_102!=' '
You can now use the Link To functionality to link the original quantity rounded field to Field_103 and you can link the quantity plus 0.5 rounded field to Field_104.
Kind regards,
Adrian

User Defined fields in F.12

Hi Gurus,
I want to add Material and region for the user defined fields in report F.12
Kindly suggets me how to add user defined fields in report F.12.
Thanks in advance.
Regards,
Abhinandan

I am in SAP FI/CO.
I want define the fields called user defined in the report F.12.
This you can find in the defination of user defined layout for the report.
I want to add some more fields for user defined fields in the layout.
Thanks for your interest in my query.
Regards,
Abhinanda,

User defined fields in task list

What is the significance of adding user defined fields in task list operation?

Dear Maniaba
We have used user fields in task list to capture quantity in terms of nos & its weight for each operation. This we used as a work around to capture the repair jobs quantity & tonnage. While mapping repair of a particular machine with out any reference to material(that is we have not created them as serialised material as in the case of refurbishment) we have created task list for its repair and user wanted to capture the quantity of repair (say how many & also its weight) so we have maintained the tonnage per 1 no in these fields. later when order is being created user selects the task list & changes the quantity field then we have developed report where we calculate the total tonnage of that job & also no of items repaired.
Regards
S P Behera

DMS :Select Range for User defined fields in Classification Tab in CV04N

Dear All,
We have added User Define Fields Date field in Classification Tab in CV04N Transaction But it has single search (parameter) where we need to have Date range selection (Like Select Option) for the documents.
I request you to suggest me some solution whether it is possible to achieve with any standard configuration as it is very critical to the Business .
I would appreciate for your quick response and support.
Thanks in Advance,
Regards,
Vishal.

Dear Ravindra,
Actually My requirement is when we enter the exact date in the input field its giving the documents submitted on that date.But when i give date range its not displaying the any documents where the document submited in between those two dates.
Ex: I have submitted the document ( in CV01N ) for the approval on 10.05.2010(this is the same field in classification).
In the CV04N transaction ,classification tab if I enter date as 10.05.2010 its giving the document submitted on that date.but if I enter the two dates 01.05.2010 and 20.05.2010 where document is been created B/W the input dates.
Please suggest how to fulfill my business requirement ,I also request to check any configuration for the user defined fields can solve this problem instead of selecting single value when it can select the range of values.
Thanks for your earlier reply.
Regards,
Vishal.

Print layout design - SAP Business one 2005 B

I am designing print layout for a sale invoice
in SAP Business one.
My question is
1. How to display excise information like
Excise duty rate,Excise duty Amount &
Education cess rate, Edu.Cess Amount
Sales tax rate,Sales tax Amount for a AR invoice
in print layout design?
I have found out respecive table & field, In this
case(AR Invoice),
Table name - INV4
Field Name - Tax Rate,Tax Amount
When i am connecting respective table & field
through database field in print layout design,
It is retreving only one row only.
For example (Below is database table)
Document key .......Tax Rate .....Tax Amount.......
1 2% Rs.20
1 16% Rs.100
1 4% Rs.40
Document key is Invoice #.
Tax rate - 2% & Tax Amount - Rs 20 only(ie) is
first row only.
In print layout i can't retreive &
display subsequent rows,
How to retrieve & display subsequent rows ?
Expecting your reply.
Yours,
A.Jeyakanthan

Dear Gordon - san,
Thanks for your reply,
If redo A/R Invoice then We loss a lot of time (Our A/R Invoice have about 500 rows).
Do you have other way to modify A/R Invoice and Link to Sales Order when created mistake.
I think the SAP B1 have Add-ons for this matter. But I do not kown.
What add -ons ?
Can you help me ?
Thanks

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

Help me . Query in " Query Print layout Design "

Hi Everybody .
I Design Report by Query Print layout Design , So when I run Report , I see Message : " Table not found Administrator (OA DM)" .
This is My Query .
( Note :this Query is run ok in Microsoft SQL . )
Select Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50))As No_Number , T0.TaxDate As Date , case left(T0.Account,4)when '1112'then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType)end as Amount1 , case left(T0.Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType) end As Amount2 , T1.U_VNS_MEMO As U_VNS_MEMO, T1.U_VNS_VNUMBER as PV_No , T1.U_VNS_JType as 'Voucher Type' , T0.Account As AC_Code , T3.AcctName as Description , T0.Debit As Debit ,T0.Credit As Credit , T1.U_VNS_NAME, T0.U_VNS_REMARKS From BTF1 T0 Inner Join OBTF T1 On T0.BatchNum = T1.BatchNum Inner Join OBTD T2 On T0.TransID = T2.BatchNum Inner Join OACT T3 On T0.Account = T3.AcctCode Where T0.BatchNum = '[%0]' Group by Cast(left([dbo].[Get_rate](T0.BatchNum,left(T0.Account,4),T1.U_VNS_JType),5) as nvarchar(50))+ Cast(T0.BatchNum as nvarchar(50)) , T0.TaxDate , case left(Account,4)when '1112' then '0.00' when '1122'then'0.00' else [dbo].[Get_11](T0.BatchNum,left(Account,4),T1.U_VNS_JType)end , case left(Account,4) when '1111'then '0.00' when '1121' then '0.00' else [dbo].[Get_111](T0.BatchNum,left(Account,4),T1.U_VNS_JType) end , U_VNS_MEMO , T1.U_VNS_VNUMBER , T1.U_VNS_JType , Account , AcctName , T1.U_VNS_NAME, T0.U_VNS_REMARKS order by Amount1 desc
Please help me .
Thank you very much .
Message was edited by:
Tran Ba Hai

Note: This Quey if I change = [%0] by = 1 , and I run Report in SAP is ok .

User Defined Field Print Layout Designer print problem

I am having a problem with a user defined field in the Business Partner - Addresses table. The user defined field is a "directions" text field that is intended to print on packing slips generated from the sales order. When I use the PLD to add the UDF in the header or in the table, all data lines in the body of the report repeat.
Please advise if others are seeing this and what work around or SAP plans exist to resolve.
Glen Kinney
Corrpac
[email protected]

Hi Glen,
I am facing the same problem.
I need to add UDFs in Business Partners - Addresses at row level. The field will be used for some Taxation Nos. like CST, LST, VAT. I have tried to add. the fields are added and data saved too.
But when I am going to PLD of Invoice and tried to get, the Business Partners - Addresses Table not showing in the list.
Shell I have your help to resolve this.
Thanks a lot.
With Warm Regards,
Chintesh Soni
India

Adding data field in query print layout designer (PLD)

Dear Experts/Gurus,
I would like to add data field in query PLD in repetitive area1 but it can't. The query I made excluding sequence no., so I think I must use datafield for that. I use textfield in the repetitive area header1. is it correct what I have thought, I mean is it really datafield can't be add in the print layout designer if it is from query ? I appreciate your answer. TIA
Rgds,

No you can't, you will have to recreate the query with the missing field and recreate a new print layout for this. Is still a flaw in SAP B1.
If you go to the service market place under education you can get the flashbook for the print layout design and the query manager and wizard, study them, they are of great help to understand the technology behind the PLD and the queries in SAP B1.
Regards,
WB

USR user defined field in OIM design console in not visible

Hi all,
We have OIM setup in the environment and wanted to add some custom attributes for USR user defined field definition. When I open the User Defined Field Definition tab, I could not see USR form. When I tried to export specific users from OIM just to check whether USR is visible or not, it is appearing. When I tried to import the same set of users again to OIM, I could still not be able to see USR in OIM design console.
Any ideas why this has happened? There were no changes in OIM env recently.
Please help.
-Mahendra.

Exported the user in xml file and found that Form Administrator is missing. I added that specific section from other working environment and it is working fine now.
-Mahendra.

User defined fields does not get added into database

Hello Experts
                          User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggest

Hello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
            oForm = SBO_Application.Forms.Item("updopd")
            oForm.DataBrowser.BrowseBy = "txtpatid"
            'Adding combo in Obervation
            oItem = oForm.Items.Item("txtpatid")
            oEdit2 = oItem.Specific()
            oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
            oItem = oForm.Items.Item("txtmnane")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
            oItem = oForm.Items.Item("txtlname")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest

Print Option on User Define Field

Hello All,
It is possible to take the printout of User Define Field. I tried it in the PLD. But what is the problem is, I created some UDF, In that some UDF direct entry , some other UDF are llike drop down UDF.
When I tried in the PLD only the drop down UDF available in the database. The other UDF are not available, so is it possible to print the other UDF also ?
Regards,
Pratheeviraj R.D

Dear Pratheeviraj,
In the current system, it is not possible to print Name rather than Code
for UDF linked to UDT.
As a workaround, please kindly create new UDF and link FMS to the UDF to
retrieve Name.
Regards,
Raghu N
SAP Business Forums Team

Adding user defined field in print layout design of Bill of matrial Report

Similar Messages

Maybe you are looking for