What is the risk of changing the order of the security providers?

I have developed a SFTP solution for Webmethods. Webmethods has IAIK (class iaik.security.provider.IAIK) as its default DH provider. To get the SFTP solution to work, I had to change the DH provider to SunJCE.
I did that through changing the order of the security providers in the
java.security file
in C:\j2sdk1.4.2_13\jre\lib\security
Now it is
security.provider.1=com.sun.crypto.provider.SunJCE
security.provider.2=sun.security.provider.Sun
security.provider.3=com.sun.net.ssl.internal.ssl.Provider
security.provider.4=com.sun.rsajca.Provider
Before it was
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.net.ssl.internal.ssl.Provider
security.provider.3=com.sun.rsajca.Provider
security.provider.4=com.sun.crypto.provider.SunJCE
security.provider.5=sun.security.jgss.SunProvider
A lot of other webmethods services uses the same server, so if we change the order of the security providers, it will affect all of these. So what I want to know is what is the risk of changing the order of the security providers?

Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
Also note that Rosetta is no longer supported in Lion and Mountain Lion...
You will need more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here  >  OWC RAM  >  http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

Similar Messages

  • I want the title on the browser to change when one of the frames changes in the Frameset.

    I am using frames (please don't tell me off!) and PHP.
    I want the title on the browser to change when one of the
    frames changes in the Frameset.
    Normally the title of the browser comes from the Frameset,
    But I am sure I have seen websites where the title changes
    depending on one of the frames... how is this done?
    C

    Then don't use frames.
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    Show us one and we'll tell you.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "colinwalton" <[email protected]> wrote in
    message
    news:epuu1t$kgv$[email protected]..
    >I am using frames (please don't tell me off!) and PHP.
    >
    > I want the title on the browser to change when one of
    the frames changes
    > in
    > the Frameset.
    >
    > Normally the title of the browser comes from the
    Frameset, But I am sure I
    > have seen websites where the title changes depending on
    one of the
    > frames...
    > how is this done?
    >
    > C
    >

  • HT203200 I need help on purchasing a game I forgot my security question answers. and it's been awhile since I downloaded anything.. how do I find out the answers or change them without knowing the old answers??

    I need help on purchasing a game I forgot my security question answers. and it's been awhile since I downloaded anything.. how do I find out the answers or change them without knowing the old answers??

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • My Audio Books are in my playlist and the chapters are all correctly arranged in my I tunes. I watched it sync to my nano but after it was all done... A few of the chapters were out of order in the nano.

    My Audio Books are in my playlist and the chapters are all correctly arranged in my I tunes. I watched it sync to my nano but after it was all done... A few of the chapters were out of order in the nano.

    This is the ipod touch forum.
    Try posting in the ipod nano forum.

  • Can I change the order plots are written to an XY graph without changing their order in the plot array?

    In LV6.1 the order in which plots are written to an XY graph is in reverse order from the order they appear in the array of plots that is feed to the XY graph control. Thus at places where �Plot 0� intersects �Plot 1�, the �Plot 0� data appears in front of the �Plot 1� data. I would like to reverse this without switching the order the plot array is built-up. Is this possible? I�ve attached a vi that demonstrates what I�m taking about. In my application I have many �highlights� that I do NOT want to list in the plot legend but that I wish to plot �over� the channel data that IS listed in the legend.
    Thanks
    Attachments:
    plotOrder.vi ‏42 KB

    Thanks for this idea. I misunderstood what you meant until Jeremy responded saying you were �right on the money�. I thought you meant that putting another plot in the array but making it transparent was going to help somehow, but now I understand that you mean plotting the �up front� data to a separate XY graph indicator which is transparent and overlaying the original XY graph. I may wind-up doing this. I�m just not excited about linking all the scaling info from one graph to the scaling of the transparent graph and creating the necessary event handling so that when the user scales one graph or changes the auto-scaling, the other graph�s scales gets updated, but perhaps it�s the only way. Thanks again for your input.

  • Changing report order using the break order property

    I am trying to allow the user to pick the order of the report's data. This has lead me to ask the following questions:
    How can the break order property of a Database Column be set at runtime, specifically in the Before Report program unit??? (changing the order BY clause in the SQL query will not be sufficient because report builder enforces that at least one column�s break order in each Group, other than the lowest one, must be set at design time)
    How can the order of the Database Columns in a Group be re-arranged at runtime, specifically in the Before Report program unit???
    Thanks for any help that you can provide.

    Hi Kevin,
    I don't think that the "Break Order" property can be set programmatically, so it may not be possible to expose it to the users. I think it can only be an enhancement request to the product.
    Navneet.

  • Changing tabs order in the JTabbedPane (DnD)

    Hi,
    I have a JTabbePane with different tabs in it and I want to be able to drag one tab and insert between other two with the mouse. Kind of like you can reorder sheet tabs in MS Excel. Does any one have an idea how this behavior may be implemented?
    Thanks a lot,
    Ilya

    Thanks for this idea. I misunderstood what you meant until Jeremy responded saying you were �right on the money�. I thought you meant that putting another plot in the array but making it transparent was going to help somehow, but now I understand that you mean plotting the �up front� data to a separate XY graph indicator which is transparent and overlaying the original XY graph. I may wind-up doing this. I�m just not excited about linking all the scaling info from one graph to the scaling of the transparent graph and creating the necessary event handling so that when the user scales one graph or changes the auto-scaling, the other graph�s scales gets updated, but perhaps it�s the only way. Thanks again for your input.

  • Analog output to the DAQ that changes when controls on the front panel change

    I'm using the PCI-6024E, and trying to output an analog waveform that can change when one of the two controls on the front panel change. It outputs fine setting it to continuous output and using a simple while loop around the "Is Task Done" VI, but if I put the "Write" VI in the while loop, it doesn't output steadily. I then tried to use an event structure, so that I'd only have to write every time something on the front panel changes, but for some reason it was writing finite samples, even though I set the Timing VI to continuous. I looked around the NI site, and found an article about this with an example. I tried to change it around to use my waveform, but whenever I run it, I get a memory underflow error. Has anyone needed to do this before? Thanks in advance.
    -- Josh Matloff

    Hi Josh-
    It looks like you forgot to post the code still, but I'll take a stab at the problem anyway. It sounds like you're looking for a way to update a continuous waveform at runtime.
    You will need to stop the task in order to replace the write buffer information, but this will only be a small gap in operation. I have attached a modified LabVIEW shipping example that shows how to use value change events for any of the pertinent waveform parameters to either programmatically stop the task, replace the buffer, set timing and restart or to just pass the task information straight through. This will lead to continuous operation with no breaks at the output.
    Please let us know if this clears up your questions.
    Thanks-
    Tom W
    National Instruments
    Attachments:
    Cont Gen Voltage Wfm-Int Clk with Runtime Update.vi ‏134 KB

  • Why are the video player change size when resizing the window a little?

    When I use the video player to show mp4 files, the "player window" changes size if I change the firefox window. Why and how do I do to get the correct size direct (640x480)

    Hi john3,
    This can be the resolution of the screen or the site detecting screensize, do you have a url we can take a look at to determine what's going on?
    Thank you!

  • When will the next wave of pre-orders for the iPhone 5 be shipped

    Dear Apple,
    I sadly had to pre-order my new iPhone 5 through AT&T last Friday morning and was told I would get the phone today and then told it would be Oct 5th. I went into a store to see what I can do and although they have plenty in stock they told me nothing and then informed me it would be late October before it shipped. I know that this has nothing to do with you but since you have wonderful customer service and knowledgable peole can you please give me an accurate date on when the next wave of pre-orders will be shipped. Thank you so much. You guys are the best. 

    You're not addressing Apple here, we're all users like yourself.
    If you want to know when the next shipment will be, call your local store or whomever you ordered it from and ask them.

  • HT1296 How do I get calendar entries made in iPad to sync and update on the computer?  Changes I make on the computer sync properly on the iPad, but not visa versa.

    Hi iPad users - I seem to have this problem with both the iPhone and iPad.  I can make entries onto my computers calendar and they will sync properly on either the iPad or iPhone, but when I enter new information on the iPad or iPhone, which is usually the case, syncing does not result in transfer of updated information from my devices calendar to the computer's calendar.  What am I missing here?  Thanks!

    Same problem as TrailJim, but 4 related problems...
    Synced data did NOT xfer to Mac from iPhone (did xfer the other way). I rechecked settings and synced again. Still none of the info from iPhone went to computer.
    But now I have FOUR COPIES of some calendar items, three copies of some and two copies of others in the iPhone. There are hundreds, possibly thousands of duplicates going back several years and reaching into the future. Many of these dupes were not on the Mac at all- the system duplicated items that were only on the iPhone.
    It takes 15 seconds to delete each duplicate item (five 'clicks', two scrolls)- there is no bulk delete option. Duplicates will  take  hours to remove. It was only 3 months ago I finished cleaning out the duplicates from the last sync. OK, I cleaned cleaned out 1 year of data in about 1.4 hours. I noticed that data deleted long ago re-appeared after the sync. The iOS calendar crashed twice and the entire iPhone crashed once during editing.
    And still it won't xfer calendar items from iPhone to Mac. So these are the 5 problems:
    data won't transfer from iPhone to Mac
    massive duplication of data during sync
    no way to quickly remove duplicates
    deleted data never goes away
    iOS device crashes during massive editing
    After 4 years Apple still can't get sync right. Are there any workarounds? A paper calendar would save hours of work every year. A Google calendar would probably work more reliably if you don't mind sharing your personal data with them. Not to mention all the other data- contacts, music, etc that people have lost with this sync system.
    tia
    Tom
    iPhone 3GS, iMac & MBP OS 10.6.8, iTunes 10, sync via USB

  • I'm scanning in photos and want to change to order within the event folder. Changing the scan number isn't doing the trick.

    Jim

    What exactly do you want? Photos in events are sorted by date which for scans is the date/time that the scan was done. You can change the photo date/time using the batch change date/time command
    LN

  • I have a new iMac at home and a PC at work.  My work PC has VPN software on it. What do I need to do in order use the VPN on the iMac to access the PC at work?

    I have a new iMac at home and use a PC at work.  My work PC has VPN/Remote Desktop software on it.  I would like to be able to access my PC from home on my iMac using this VPN. I am not sure how to make that happen.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • I took the advice of one of the people in the forum and changed a number in the registry from a 10 to a 20 to give more time for apps to load and now it is too slow. I need to change it back but I do not know how, please can someone help me?

    this advice came from someone in a solved part of the forum, who had a long list of computer solutions.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Is the option to change font sizes in the Mail message list broken?

    I can change the font and font size in the messages themselves, but not in the column that lists the messages. Weird. A Google search didn't turn up any references to the problem. Using OS X Mountain Lion 10.8.2 on a 2012 MacBook Air.

    philipfrombrooklyn wrote:
    Thanks, Barney, but if the font settings don't affect the message list, the option to adjust size and font in the message list shouldn't be offered in the mail preference panel. This feels like a bug. To display a list in a font too small for users to read without providing an option to enlarge it is bad user interface design.
    You'll have to talk to Apple about that. I don't work for them, nor does just about everybody else here.

Maybe you are looking for