What is the 'src' folder really meant for ?

Is it customary to put stuff that is not AS3 code inside the projects "src" folder ? And if it is, why do folders that do not contain any source code look like AS3 code packages ?
I would much prefer to put stuff that is not code in their own specific folder (icons, xml files, etc.) to keep my project cleaner. But, if I do so, those files will not be copied to the bin-debug and bin-release-temp folder upon compilation. What is your take on this ?

I guess you're right but the package icons lead me to believe only code was expected in there.
The other annoyance is that if you create a subfolder which points to another location on disk (which FlashBuilder allows you to do), its content will not be copied to bin-debug or bin-release-temp. This makes it hard to symlink content (such as assets) accross projects. My workaround for this issue has been to create OS symlinks instead.

Similar Messages

What is the src.zip file used for?

Just a few more question please.
I've read through the JPDK install docs and it doesn't mention anything about the src.zip file. I noticed it has many references i'm interested in. What is this used for?
I've loaded the EM and redeployed the ear file for the Oct JDPK. I've noticed after registering the Provider that about 1/2 of the Sample apps have a status of Loaded. But many indicate Not Loaded. For example: ExternalAppFlights. How do I get these loaded?
Thanks
Chase

Hi Chase.
oops i forgot to answer the second part of your question.
The file integrating.external.provider.v2.html at %pdk_extract%\pdk\jpdk\v2\doc\externalApp contains all the details to deploy Fights of Fancy Application.
Just go through the document & should be through.
Regards,
Abhinav

What is the SPDIF Optical Out meant for?

I have connected the optical s/pdif out from my Neo2 Platinum to my Panasonic 5.1 Receiver, but I can´t hear anything. The "red light" reaches the receiver, but it can´t decode the signal somehow. I had this with my Audigy 2 card: When I enabled "96khz" my receiver couldn´t read the signal, but when I changed this option to "48khz" it works perfectly. Unfortunately I can´t see this option within the AC97 drivers. So what can I do?
Yesterday I had PowerDVD and Winamp running side by side. I could actually hear the PowerDVD movie, but not the MP3 from Winamp. So it has something to do with the signal from the mainboard. How can I change this?

Quote from: bassmadrigal on 14-July-05, 15:42:01
The spdif out is only capable of relaying dolby encoded sound to the receiver. It is unable to transfer 2 channel..
Um. No.
Per the original question - the optical connector carries the exact same signal as the coaxial digital.
The funny truth is that SPDIF wasn't intended for listening. It was intended for karaoke. They thought they'd make CDs with the lyrics encoded in the less significant bits of the audio stream, and have the karaoke machine strip them out of the bitstream.
But audiophiles started using the SPDIF digital out on their CD players to connect them to audiophile-grade DACs.
Since it wasn't really designed for audio, there's some occasional (mostly insignificant) bit distortion, and the distortion can be made worse by a ground loop introduced by the shield on the coaxial connection.
The optical connection overcomes those issues pretty well. There's no electrical connection and thus no possibility of multiple paths to ground, and the data latches built into the optical transmitter and receiver guarantee that bits are better defined.
Don't pay a lot for optical spdif ("toslink") cables. The only feature worth anything is strain relief on the connector, to keep you from accidentally yanking the fiber out of the connector. The common plastic fiber works just as well as glass on hookups less than about 150 feet in length.
The relivant specifications are IEC60958 and IEC61937. Google for 'em, it's interesting reading.
ANYWAY, as per the specific question.
Pursuant to IEC60958 and AC97 specifications, and restricted by the choice of the ALC850 codec chip, the digital audio connectors on the Neo2 are capable of 48khz 16 bit transmissions.
This includes 48khz 16 bit PCM stereo audio and Dolby Digital compressed audio up to and including 48khz DTS.
Whether or not the windows drivers are capable of the dolby passthrough, i dunno, I've never booted windows on mine. Linux (with ALSA drivers) surely can.
Some audio codec chips are capable of more rates. IEC60958 and it's extensions allow for 32khz, 44.1khz and 96khz in addition to the AC97-mandated 48khz. 18 and 24 bit resolutions are also allowed.
If you intend to build a system for use as a home-theater PC, i highly recommend finding a motherboard with a codec that will at least do 44.1khz. Resampling the audio to 48khz can do horrible things to it. 32khz is only needed for some videos you might download from the internet, some VCDs, etc. You'd already know if you needed 96khz.
Your games are 5.1 but they are not encoding Dolby surround on the fly, so the digital connector is only going to get you 2 channels unless you are watching a DVD or something.
The exception is nForce2 SoundStorm boards, which have an on-the-fly dolby digital encoder.
Dolby is starting to license out their real-time encoder, so it may be possible in the future to buy a piece of software that will push your 6 channel game audio through your digital output.
This is why most surround receivers have a multi-channel input. You're just going to have to get a bunch of cables and run analog.
I also highly recommend that you invest in ground loop isolators.
Since your computer has a three-pronged power plug, it has it's own route to earth ground. Most stereo equipment does not.
When you plug the analog audio output from your computer into your home stereo receiver, in most cases you will hear a 60hz hum on the speakers. This is a harmless (but annoying) tone generated by the multiple paths to ground in your electrical connections.
I've had good experiences with RCA type ground loop isolators intended for car audio use. This has RCA connectors just like your stereo. You'll plug the isolator into the stereo and the computer into the isolator using normal audio cables.
I've had good experiences with Scosche ESO34 ground loop isolators. I've paid about $10/ea for them on ebay. You may pay as much as $15 or $20 for them at car audio specialty stores. Sometimes you can get them cheaper, especially if you're buying more than one of them.
Other RCA type ground isolators probably work just as well. I actually have a box of half a dozen of some other brand that i haven't tried yet, that i paid about $2/ea for.
Some come with brown wires dangling out of them, for earth ground. Personally i wouldn't connect them to anything.
Some of the nicer sound cards - most of the Audigy line for example - has on-card ground isolation, and won't need an outboard isolator. Motherboard audio almost certainly does not have ground isolation.

[svn:osmf:] 10579: Removed the src folder for the AkamaiBasicStreamingPlugin, this folder structure made it impossible to load the swf as a static plugin .

Revision: 10579
Author:   [email protected]
Date:     2009-09-24 16:40:08 -0700 (Thu, 24 Sep 2009)
Log Message:
Removed the src folder for the AkamaiBasicStreamingPlugin, this folder structure made it impossible to load the swf as a static plugin.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
Added Paths:
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/AkamaiBasicStreaming PluginInfo.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/AkamaiMediaEr ror.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/AkamaiMediaEr rorCodes.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ion.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ionFactory.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetLoader. as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetNegotia tor.as
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetStream. as
Removed Paths:
    osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/src/

Hello
On my flash, I already have those parameters in place.
I don't think there would be any security issues however, since I have used a player .swf which loads from the media site and plays the videos without a problem.
http://www.iongeo.com/channelguide_test_dev/
click on the four images at the bottom of the screen to see how it works.
Now, I am pretty much doing the same thing, but this time embedding the other swf to load the videos. As I mentioned, I was able to do this when everything was on our server, but now there is an issue for some reason when I try to load the .flv into the .swf from the other media server.

What is the different between JMS Client for sonicMQ 4.0 and sonicMQ 6.1?

hi everybody,
I'm currently in big crisis and hope somebody out there
can give me some guidance.
We have a JMS client developed by an ex-colleague. The jms client was
developed specifically for SonicMQ 4.0. Recently, we are upgrading to
SonicMQ 6.1 and thus, we re-compile his code. Before re-compiling his
code, we had put sonic_Client.jar and sonic_Crypto.jar in the library
directory. There was no error.
We were able to startup our receiver client without error. The receiver
subscribed to the SonicMQ server 6.1 successfully. We could see it in the
SonicMQ Management console. However, when we send a topic, the
receiver client does not consume. All of us had been working day and night
to find out the answer but no progress until now.
We have a couple of properties file and I think, jmsconnect.properties file is
the one been used. This is the content:
# Must enter value if JNDIURL below, is not specified
BROKER=mssonq:2506
JNDIURL=
MODETYPE=com.sun.jndi.ldap.LdapCtxFactory
TOPICCONNECTIONFACTORY=
QUEUECONNECTIONFACTORY=
The previous version that was developed by my ex-colleague is still running
fine in the current production server.
Please let me know if the jmsconnect.properties is correct or wrong. By the
way, what are the major code changes required for jms client that was
meant for SonicMQ 4.0 to get it upgraded for SonicMQ 6.1.
Any help will really appreciate.
thanks & regards,
Kenny

AT&T is a GSM carrier. Sprint and Verizon are CDMA. The CDMA iPhone 4 has no SIM slot. The CDMA iPhone 4S does but the phones still can't be used on GSM in the U.S. The software versions are the same across carriers at this time.

What is the opt folder in my hard drive?

What is the opt folder used for in my hard drive? All I know it has some files for GIMP and gutenprint.
Should I leave that folder alone?

Many open-source software projects (like gimp) use the /opt folder. If it's not there, they will create it when you install them.
In a standard unix-like operating system (and darwin, the unix-like foundation of mac os x is no different), the core binaries are installed in /usr/bin or /usr/sbin, and core libraries are installed in /usr/lib, and there are specific directories where the system looks for specific types of information... However there are lots of dependencies amongst this core functionality: more than one binary application can use the same library.
If the user decided to install some additional software, (and usually the admin password is needed to do it, right), the user has authorized the installer to do what it needs to do to get the software installed, even if this means updating one of the libraries to the most recent version. In this case, what happens to all the other software already installed that used the old library? Well... what happens, is none of the old programs work anymore.
The workaround has been to create a separate directory for additional software installs, so that the core functionality in /usr won't be threatened. Many software projects created a directory inside /usr called /usr/local in which they install their components. Other projects use the /opt directory. Others use /opt/local.
This is why, in unix-like operating systems, you find repititions of the same folders in other folders (i.e., there is a /usr/bin and a /usr/local/bin and an /opt/bin). The "bin" is a common name for folders that contain binaries (commands and applications that are executable and built for the specific operating system that they are running under), and "lib" is a common name for folders that contain libraries. You can find "bin" and "lib" folders throughout your system.
One downside to this is that additional programs installed into the "opt" directory could interfere with the ones that are already there, and for this reason, some programs will create their own directory all to themselves and install everything they need there, even if most of it is a copy of libraries that are already present somewhere else on the system--space is less and less of an issue in the age of terrabytes.
If you learn make your own binaries by compiling them from source code (way easier than it sounds, as you usually only have to type "./configure" and wait an hour for it to finish, "make", wait another hour, and then "make install"--really that's all there is to it) then you can control which directories the software uses (whether to use /usr, /opt, or to create a new directory entirely) plus you can run lots of cool free software.
So that's what the opt folder on your hard drive is for.

What's the optimum version of Safari for OS 10.3.9?

My first post here.
What is the optimum version of Safari for use on a PowerBook G3 "Pismo" running OS 10.3.9? I'm currently running 1.2 (v 125). I've downloaded 1.3.1 but when I try to install it says "Not compatible with this system." Is there some version in between that would work better? If so, I haven't been able to find it, and the Update Software feature doesn't find it either.
I did upgrade my firmware at some point, but I don't remember how to look up the version. Any help most appreciated.

Hi and Welcome to Apple Discussions
The highest version for Panther is 1.3.2.
Before you can install 1.3.1, you need to install 1.3. This may get you there: Apply the 10.3.9 Combined Update. Do not use the computer while the Installer is running. Once complete you'll need to restart the computer.
Then, via your Finder, go to your Applications>Utilities folder. Open Disk Utility. When open, click on the HD on the left, then First Aid Panel>Repair Permissions on the right. Once complete, open Safari.
When the Safari browser is open, go to the Safari Menu>About Safari. Which version are you using? If it is 1.3.2, then you're good to go. If it is 1.3, then run the 1.3.1 installer again. Once finished (I believe you'll have to restart), run the 1.3.2 update. Once the installer/restart is complete again "repair permissions".

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What is the "protected_media" folder and why can't I access it?

I was going through File Manager and saw a folder called "protected_media". Trying to open it gives me a "Folder Unavailable: You don't have permission to access this folder" message. Why do I have this folder and why can't I access it?
Also, what is the "misc" folder? Why does it have a folder inside it called "android"? Why can I go Device/misc/android/DCIM/Camera and find copies of everything that is in the Device/camera folder? Can I delete "misc" without messing anything-up?

the misc folder is for android apps and are virtual links to the files.
Do not delete the files in there or they will be gone from both places.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

What's the Best Business-Card Scanner for Leopard?

Hello, All:
What's the best business-card scanner for the Mac, using Leopard? Anyone currently using one or know of one? Or two?
Thank you,
Dean

I use the IRIS card scan which works but is a long shot worse than the Cardscan which i used to have on a pc back in 2000.... there is currently no really good solution for business card scanning on the mac that i have seen.

What's the best flash to use for nighttime sports games?

What's the best flash to use for nighttime sporting events? I have a rebel XT and I'm pushing it to its limits trying to stop the action. I've tried a speedlite 430 but it didn't have a hook up for an external battery pack and I was told I'd need the extra power. Just tried the 580ex ll on Friday but at the 1/1 setting, it didn't flash for each frame in a burst, even with the external power. I should have backed it down to 1/4 but didn't know at the time. Any thought on a really good flash for night sports? Is the 580 a good choice?

JUst as Tim_S said. YOu will want a external battery pack. Unforatannly the 430 does not have the option to plug in a external battery pack so will want to pick up a 580 or one of the new 600 series.
Then you start looking at the battery packs. I recommend Quantum power packs
http://qtm.com/index.php/products/2012-05-17-18-18-59/turbos
5D III, 8-15L, TSE 24L, 24-105L, 85L, 70-200L, EX600 X2

What is the best soft wear update for a mac desktop with   System Version:     Mac OS X 10.5.8

What is the best soft wear update for a mac desktop with   System Version:
Mac OS X 10.5.8

It will depend on the actual model you have.
Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99 while Mavericks is free. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

What is the latest version of Firefox for macs

What is the latest version of Firefox for Macs Ours tells us to update then it says it cant do it

Firefox 4 requires at least OS X 10.5 and an Intel Mac, so should work on your computer.
* http://www.mozilla.com/firefox/4.0/system-requirements/
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

What is the 'src' folder really meant for ?

Similar Messages

Maybe you are looking for