What is the SYNTAX for the user and group filters??? Is the HTML Ampersand token Amper A m p semicolon required in the filter

There seems to be quite a bit of confusion over the actual syntax for the user and group filters on the Forms Based Authentication  Ldap Role and membership providers.. MSFT isn't really clear and there is a universal confusion in the blogsphere.
I the filters should the prefix be the ACTUAL Ampersand or the HTML token for an AMPERSAND.. I realize the in many cases the blogger might have inadvertently specified the html token when the bare naked ampersand was intended..   The question
therefore is : can a filter be taken directly from and ADSIEdit query and used as a filter or must the filter be made HTML safe by swapping out the AMERSAND with the HTML Token for AMERSAND before putting it into the configuration
for the LDAPRole/membership provider...
All science is either physics or stamp collecting

Hi GUYO,
I am not quite sure how we implement this on sharepoint side, as I did research and sharepoint may not have this feature to do this.
most of the LDAP for sharepoint may need to follow these steps in this article:
http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
http://blogs.msdn.com/b/sridhara/archive/2010/01/07/setting-up-fba-claims-in-sharepoint-2010-with-active-directory-membership-provider.aspxhttp://blogs.msdn.com/b/kaevans/archive/2013/01/31/configuring-ldap-for-fba-in-sharepoint-2010-or-sharepoint-2013-with-powershell.aspx
here is an example :
http://blogs.msdn.com/b/sharepoint__cloud/archive/2011/12/20/achieving-fba-with-adlds-amp-sharepoint-2010.aspx
if should this questions was at the ADSIEdit part, perhaps you can help us by opening a new thread at the AD foum
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

    I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

    Are you using the Office for Mac 2011 version, as you need to do?  The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
    Hope this helps

  • HT1414 I have a new iPad Air.  I am trying to set it up per company instructions. I have instructed to go to iTunes store and get AirWatch MDM Agent.  it asks for my Server and Group ID.  When I enter this data ...I get a reply "The certificate for this s

    I am trying to download AirWatch MDM Agent app on a new iPad Air. I get a "Notice" that iTunes store does does not recognize the Server for swalife.com, swaefb.  Can I get some help???

    I think that you will have to talk to your IT people to find out what the problem is and get some help.

  • Is there a way to reset the parameters of all the system's native users and groups to their default settings?

    After the upgrade to 10.8.3 my console is streaming perpetually with hundreds of lines of what appears to be permissions denials.
    I've rebuilt permissions from my admin user, root, safeboot, an external virgin os install, and the recovery partition
    run disk utility multiple times
    safebooted multiple times
    rebuilt the directory structure via the latest build of Diskwarrior
    removed all peripherals
    reset PRAM
    reset SMC
    ran the Extended Hardware Test
    all drivers are up-to-date
    Used OnyX to hunt for corrupted preference files
    Used Onyx to clean every cache in the system
    Cleaned up the fonts via Font Book
    Rebuilt Launch Services
    Rebuilt dyld's shared cache
    Disabled Swap
    Disabled Time Machine Local Backups
    I'm running a 2011 MBP Quad i7 17" 2.3GHz 750gig internal 7200rpm with 16gig of ram 1600x1200 display
    OSX 10.8.3 with dev kit

    For what it's worth, this is the exact same set of ACL's that get "fixed" every single time i run the permissions repair:
    Started verify/repair permissions on disk1s2 Flux
    ACL found but not expected on "private/etc/apache2/users"
    Repaired "private/etc/apache2/users"
    ACL found but not expected on "private/etc/postfix/aliases"
    Repaired "private/etc/postfix/aliases"
    ACL found but not expected on "private/etc/postfix/main.cf"
    Repaired "private/etc/postfix/main.cf"
    ACL found but not expected on "private/etc/postfix/master.cf"
    Repaired "private/etc/postfix/master.cf"
    ACL found but not expected on "private/etc/profile"
    Repaired "private/etc/profile"
    ACL found but not expected on "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
    Repaired "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
    ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
    Repaired "Library/Preferences/com.apple.alf.plist"
    ACL found but not expected on "System/Library/LaunchDaemons/org.postfix.master.plist"
    Repaired "System/Library/LaunchDaemons/org.postfix.master.plist"
    ACL found but not expected on "Users/Shared"
    Repaired "Users/Shared"
    ACL found but not expected on "private/etc/named.conf"
    Repaired "private/etc/named.conf"
    ACL found but not expected on "private/var/root/Library"
    Repaired "private/var/root/Library"
    ACL found but not expected on "private/var/root/Library/Preferences"
    Repaired "private/var/root/Library/Preferences"
    ACL found but not expected on "System/Library/Keychains/X509Anchors"
    Repaired "System/Library/Keychains/X509Anchors"
    ACL found but not expected on "private/etc/hostconfig"
    Repaired "private/etc/hostconfig"
    ACL found but not expected on "private/etc/shells"
    Repaired "private/etc/shells"
    ACL found but not expected on "private/etc/ssh_config"
    Repaired "private/etc/ssh_config"
    ACL found but not expected on "private/etc/sshd_config"
    Repaired "private/etc/sshd_config"
    ACL found but not expected on "private/var/db/launchd.db/com.apple.launchd"
    Repaired "private/var/db/launchd.db/com.apple.launchd"
    ACL found but not expected on "private/var/yp/binding"
    Repaired "private/var/yp/binding"
    Finished verify/repair permissions on disk1s2 Flux

  • What is the purpose setting apple ID in Users and Groups?

    What is the purpose of setting the apple ID in Users and Groups preference pane of System Preferences?  Is it really necessary?  All of apples services can still be used without setting an apple ID (like iCloud, iMessages, FaceTime, iTunes, etc...).   I am sure apple has a reason for it just would like to know what it is.  Anyone have an idea?   Thanks for the help.

    ya, I knew about that but I think it also has something else to do with screen sharing, file sharing and back-to-my-mac.   Thank you for the help.

  • Mounting drives on the desktop for all users

    Hi
    Is there a way of mounting drives ( like USB pens) on the desktop for all users please?
    It's a causing a lot of confusion here... you think the USB drives aren't working when you can't see them being mounted in front of you.
    I do realise you can set this in Finder/Preferences but I wondered if there were a way of just making it the default for any user that logs in ( whether locally or to the domain).
    Thanks for your assistance.

    micromike wrote:
    Thanks for your help Barney.
    Hmmmm....why would anyone disable this basic thing?
    Here's a reason. I don't use the Desktop, so why would I want the drives to pop up on my desktop.
    They appear in my Sidebar in any Finder window.
    That's why I turned it off on my system. You'd have to ask the 1000 users why they turned it off.
    However, I'm not sure I understand what you want. If you mount a usb drive on your system, and share it out over the network, it is not a Hard Drive on any network user's desktop. It is a network share.

  • Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

    Hello expert,
    This is regarding the printing of the dunning form using F150. 
    At first, using company code and account clerk (BUSAB), we retrieve the user id.  The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id.  The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on).  The problem here is , the address details are printed on the form for one user and not for the other user who is processing.  Any idea regarding this.  Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this.  Awaiting reply,
    Cheers,
    Bala

    I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
    I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
    Thanks

  • WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

    I jumped on my parents computer, which is on a domain.  I added a new local user(with my live.com login) and gave it admin status.  That's when the trouble began.
    The main user profile disappeared.  I used the command prompt fix (see other fixes) to add the missing user back into admin.  I logged back in, and it set up the account for the first time (WTF?).  I cannot access any files from the main account
    (that I logged into just fine before to get this debacle started.)
    When going to Local Computer Management --> System Tools, my users and groups tool is missing.
    I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1.  To manage user accounts for this computer, use the User Accounts tool in the
    Control Panel."   <---- Awesome!  (that was sarcasm.)
    I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".  
    To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again.  I wouldn't recommend reinstalling 8.1,
    I would say go back to 7 and wait until 10 comes out.   Windows 8 is the new Vista.  Good luck!

    Hello AhavahOlam,
    I can understand your feelings.
    If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
    Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
    As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • WLS Users and Groups interface questions / observations

    I'm new to WLS, having just installed OBIEE 11g for the first time. There are some oddities in WLS around setting up Users that I'd like to ask about, to see if I'm just missing something, or if the interface really IS this bad. Please feel free to comment in any way, or to correct any statements that are erroneous. Here goes:
    1. The use of Previous and Next buttons instead of a vertical scroll bar for finding users and groups in their respective lists. What if you have several hundred users, and the one you want to modify starts with the letter 'Z'? That means clicking the Next button several dozen times. (Security Realms … myrealm … Users and Groups … Users) Not only is there no scroll bar, there's no search box either. The only way to get to a user near the end of the alphabetical listing is the Next button. Is that correct?
    2. After adding a new user, what's the next most logical thing to want to do? How about assigning that user to Groups? So why do I have to click Next several times to find that new user in the alphabetical list? I don't see a sortable 'Date Modified' field for the table of users, nor a link to the "Most Recently Added" user. Nor can I assign groups during the same action as creating the user. In the example in #1, I might have to click Next several dozen times to get to the user I just added. Is that correct?
    3. When creating a new User, immediately after clicking New, where is the most likely place that I'd want to go? How about the Name field? Right now, the cursor rests in some indeterminate location. I have to hit the Tab key 14 times, or move the mouse into the Name box and click it. The active cursor position does not default to the Name box when creating a new user. Is that correct?
    4. I don't see a 'Create Like' button for creating Users, so that existing group membership can be easily replicated. I'd like to be able to add a new employee by clicking to highlight an existing user from the same department, clicking a 'Create Like' button, then entering a new user name and password, with all group memberships assigned automatically based on the source user. The same could be said for replicating groups. I don't think that exists. Is that correct?
    5. I don't see a clean way to return to the User list on the page on which I clicked a user name. Imagine that I'm going through my entire list of users one at a time to set an attribute. I click on the user JSMITH and set the attribute. The only way to get back to JSMITH's page and select the next user list is to hit the browser's back button three times, or to click the Users and Groups breadcrumb at the top of the screen and use the Next link multiple times to find that page again. Is that correct?
    6. I don't see a way to bring up a Group and assign Users to it from a list. It appears that the only way to assign a User to a Group is to access a User profile and click Groups. If we're creating a new group that has 200 users selected from a list of 500 users, that could potentially represent somewhere between 5000 and 10000 mouse clicks. It would be much more efficient to be able to bring up a group, then select its members from a list of users. That does not appear to be possible. Is that correct?
    7. It also appears that when assigning groups for Users, the list of Available Parent Groups sorts the lowercase entries after all uppercase entries, so that groups that start with the letter 'a' fall after groups that start with 'Z'. That is not the case with the list of users. The User table uses a case-insensitive sort. Is that correct?
    8. When I want to delete more than one User, and the ones that I want to delete are on different pages, there appears to be no way to select those users from multiple pages at the same time. So, imagine that I have 500 users, and I want to delete two users, one of whom is listed on page 48, and the other on page 50. I would have to click the Next button 47 times to find the first user and delete it. At that point, the interface returns to page 1, and I have to click the Next button 49 times to reach the second user. Is that correct?

    Hi,
    Regarding your first question, you might want to press the "Customize this table" button, then select the maximum allowed amount of rows in "Number of rows displayed per page:" that would resolve some of the problems you're having with the interface. I do think this is not a great graphical tool, and there are some usability issues.
    Regarding the adding of users to groups, it seems the way you describe is the only way of doing it, however you could try using a script instead of the graphical console, the easiest way of making it is adding a user to a group while using the "Record" button on the top of the screen to get a wlst script to use as a model, then create a new script with all new users you want to add/modify.
    Regards,
    Franco.

  • SNMPv3 user and group dependency?

    HI,
    if i create group with authpriv and user with no authnopriv, and if we add user to this group. what will be result? this user will be authenticated or not? what is the dependency between users and groups ? Which has high priority?
    thanks guys

    Hi. Before I found this answer and the link Vinod Arya provided, I had the same question, so I did some tests in GNS3 configuring different snmpv3 groups within a router cisco 2800 (i.e. a no-auth group, an auth group and a priv group); creating different users with different security levels  and making all the possible combinations between users and groups. After capturing with Wireshark those results (i'll put them at the end of the question) I write a "rule", the "general conclusion" of that dependency between the security level of groups and users, as follows:
    - " Within the agent, the group's security level has precedence over the user's security level member of that group, if the group's security level is greater than the user's security level. This is explained with the following two scenarios. First scenario, If inside the agent, the group which the user belongs, does not have any securities (a noauth group) and the user inside of it has a security level greater, for example, authPriv; an external incoming request to the user of this agent, with authNoPriv security level, will be able to gather the information that was looking for, despite the user inside router's agent has configured both authentication and privacy protocols and keys. Second scenario, the opposite situation. When the group's security level is higher, for example authPriv and the user within the group has a lower security level (for example, a noAuthNoPriv user or a authNoPriv user)  an external incoming request to the user of this agent, with noAuthNoPriv or authNoPriv security level, will get a NULL response to the request.
    That's why concordance must exist between the security level of both the group and the users members of that group.
    Another important consideration is consider the interaction between user's security levels (admin and agents). The security level of the user has precedence over the request's security level of the admin console, because if the security level of the incoming request is higher than the configured for the user who it is asking to, the request won't be successfull and an error message "unsupported security level" will be sent to the admin console."  -
    Please I want to know if the conclusion I reached after the analisis of the results of tests is correct, or if it's imprecise, you can help me to improve it.
    In the link it doesn't say literally that the group has precedence, it mentions about the errors in the case of a missing password or inconsistence between group and user's security level. Also saying that the group's security level has precedence over the user's security level is not always true wich I think was demonstrated with the first scenario example, that's why I need to know if the explanation I wrote is good or is missing something.  Thanks in advance
    Results of the tests: the image provided

  • User and group names truncated with ls

    Hello,
    When using the 'ls -l' command the resulting list truncates user and group names that are longer than 8 characters.
    Is this a know issue?
    I'm running Mac OS 10.4.10.
    Thanks,
    Anthony

    Jun T. wrote:
    If a program like "ls" wants to know the username corresponding to the uid, it must call a library function of the operating system. But there are two library functions, one gives the correct username and the other truncates the username.
    The basic library function is getpwuid(3) which returns the correct username.
    Hello Jun,
    I ran a search using Xfind (Rixstep) on /bin for 'userfromuid' and /bin/ls was listed as I might of expected.
    Also, /bin/ls was also listed when 'getpwuid' was used as a search Key.
    Peeking further into /bin/ls further with Xstrings (which is Rickstep's "adaptation" of the "strings' tool" ) reveals the string '_ getpwuid'.
    Does this mean that at some point the 'ls' command can call the getpwuid() directly under some circumstances rather than going through userfromuid() which relies on the cache you mentioned?
    The problem is the size of the table; userfromuid() allocates only 8
    characters for each username (the number 8 comes from UT_NAMESIZE in /
    usr/include/utmp.h), and truncates the username if it is longer. This
    may be "fixed" in a future version; or it may not be "fixed" to keep
    backward compatibility. I'm not sure.
    I've heard that utmpx.h has 'UTXUSERSIZE' which is defined as 32. Does not that allow for user and group names larger than 8 characters?
    By the way, I can't find the directory usr/include/utmp.h on my drive.
    Is there a way to reset or redefine this 'UT_NAMESIZE' field to more than 8 characters wherever the userfromuid() function stores it?
    The commands "users", "who", and "w" read the file /var/run/utmp, in
    which truncatd usernames of the currently logged-in users are saved.
    Does some command initially call the function as 'ls', userfromuid(), to result in truncated names being saved in file /var/run/utmp as well?
    I think there are many programs which depend on this fixed-width utmp
    file, so it may not be "fixed" in a future version. "
    I believe there are third party tools which rely on the userfromuid() call which require this bug to be fixed in order to display accurate user and group name data.
    Thanks for your informative reply,
    Anthony

  • User and group handling in LDAP Realm

    Hi,
    I'm currently using an LDAP Realm for storing users and groups, which I need to be able to add, amend and remove at runtime.
    I understand that in earlier versions of Weblogic, the methods to do the add/remove/modify were not implemented but I was told that this may change in WL6. If so, is there any documentation or examples about these methods ? If not, would I need to extend ManageableRealm to create a custom realm ?
    Any help much appreciated.
    Dave

    Hi Dave:
    In our project, we use security realm (LDAP realm) for Users and Groups authentication. We turned the CacheRealm on to optimize performance. To add and amend Users and Groups, we use a stateless EJB to talk to LDAP server. This kind of partition works fine for us to separate the user authentication
    logic and user management logic.
    Fun
    Dave Horner wrote:
    Hi,
    I'm currently using an LDAP Realm for storing users and groups, which I need to be able to add, amend and remove at runtime.
    I understand that in earlier versions of Weblogic, the methods to do the add/remove/modify were not implemented but I was told that this may change in WL6. If so, is there any documentation or examples about these methods ? If not, would I need to extend ManageableRealm to create a custom realm ?
    Any help much appreciated.
    Dave

  • What is the password for 'oracle' user created during XE installation?

    Hi,
    What is the password for 'oracle' user automatically created when XE is installed?
    I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
    During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
    Please let me know or point me to the document.
    Thanks,
    N

    Hi Jari,
    I tried your suggestion, but it didn't work unfortunately.
    When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
    So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
    It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
    Thanks,
    N

  • I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    Hi Linafrick,
    To install Acrobat 11 on to 6 computers you can purchase Volume License.
    But since you want it for only a month you need to purchase Acrobat subscription.
    A single subscription is good for 2 computers and the same Adobe ID cannot be used to buy multiple subscription copies of Acrobat.
    You can however opt for Creative Cloud for Team license such that you can become the Admin and grant access to the 6 users who wish to install Acrobat on their machines.
    Feel free to reach our customer service via chat to know more information: Creative Cloud membership support
    Regards,
    Rave

  • HT5282 What security is best for my MacBookPro and iMac? I have had some company asking me to join them to 'clean' and get rid of some unused files. Is this ok, the cost if around $40. I don't mind paying but I am a bit worried they might not be approved

    Hi,
    Am new at this. What security is best for my MacBookPro and iMac? I have had some company asking me to join them to 'clean' and get rid of some unused files. Is this ok, the cost if around $40. I don't mind paying but I am a bit worried they might not be approved by Apple.

    I have had some company asking me to join them to 'clean' and get rid of some unused files.
    Does this company know you use Mac OS X? If so this is a worrysome trend.
    For a couple of years now there have been several scam artists that call you, claiming to be from 'tech support', or your ISP or even Microsoft, reporting that your machine has been idenfitied as being infected and that you need to give them access to your machine to 'clean it up'. In the process of this 'clean up' they thoroughly hose the system by trashing important files and then demand more money in 'recovery fees' to restore the system.
    I've laughed in their face whenever they've called me since they have no clue of how to compromise a Mac system, but if they've started to target Mac users then more vigilence is required.
    http://www.informationweek.com/security/management/microsoft-windows-support-cal l-scams-7-f/240005023
    Just Google 'microsoft support scam' for more reports/variations.

Maybe you are looking for