What is the use of custom properties for terms in term store management of SharePoint 2013

Hi All,
Can some one pls explain what is the purpose of custom properties for terms in term store management tool of SharePoint 2013.
In general, for each term we have shared and local properties. What is the real purpose in terms of SharePoint development.
Please share with possible scenarios. Does it refer's to a hierarchical metadata in SharePoint ?
Thanks keshav,Share point Developer

The custom properties for terms allow you to further define or clarify a term via the properties. You can then display these properties in search results or specify query rules that look for specific custom properties.
Here is an example of how to create a query rule using custom properties:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a8b53ffe-869e-4c86-8c43-d239370ee7d5/custom-properties-of-the-managed-metadata-service?forum=sharepointgeneral
Here is an example that uses code to verify that a custom property exists on a term object that is pinned to another term object:
http://msdn.microsoft.com/en-us/library/jj163273.aspx#SP15_H2UseCodeToPinTerms_CodeVerifyCustomProperty
Doug Hemminger http://www.sharepointdoug.com

Similar Messages

What is the use of 'is available for Everyone'

anyone please tell me what is the use of 'is available for queries' in the BMM layer.
Explain with example is appriciated.
Thank you.

Hi Viswa,
For the 'text' property of UI Element, you can provide a fixed value or bind it to context attribute of type String.
If you provide some fixed value for the text, you can set the width property accordingly.
The 'wrapping' property makes more sense when you have binded the 'text' property to some context attribute & you do not know the length of the text beforehand (text value may be coming from backend).
There you can provide value for 'width' property & set 'wrapping' = true, so that fixed text length is visible.
I think another use case scenario can be if you wish to resize the application window, you can adjust the space taken by the label using width & wrapping properties (resizing window does not have an impact)
Hope this clarifies your doubt.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 15, 2009 12:14 PM

What is the use of Release Strategy for Sales Document

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.

Hi,
Can i know what is the use of Release Strategy for Sales Document? Difference between lowest level and Highest level.
Lowest Status No: Sale Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated; the old status with status number is deactivated. This is only valid under certain conditions. The system makes a note of the status with the highest status number that has been reached up to the present. The "lowest number" of this status number determines which status number a new status must have.
Highest Status No: Sales Document can have several statuses at the same time. However, only one of the statuses may have a status number. If another status with a status number is activated, the old status with a status number is deactivated, provided the new status number does not exceed the 'highest number' defined for the old status number
If you want more clarity try to check below link
http://www.sapfunctional.com/SD/ReleaseStrategy/Index.htm
Regards,
Prasanna

What is the use of custom service in doe?

Dear Experts,
what is custom service & what is the use of that. any one would you please explain?
Thanks & Regards
Ashok Reddy Jalapu

Hi Asok,
Custom Services are services which are implemented by application developer or consultant during design time and plugged into SAP standard software to perform specific task.
These services are based on the customer requirements and is included into the flow blue print (standard flow defination of a data object).
For eg : While performing Delta-download, you need to archive some data in DOE based on their business requirements.
Regards,
Anil

What is the use of Custom Controller in ABAP WebDynpro?

Hi,
Can you explain me about Custom Controller and its uses and some example on it?
I have gone through SAP help but not understand clearly. Wish to see some good explanation here?
Thanks in advance.
Regards,
Meera.

In addition to above,
1. Custom controller can acts as "Config Controller"
2. it is bit different than component controller in the manner that Hook methods will be different here ( only two ) and
these methods will not participate in the phase model unless there is a method call of custom controller as opposed to component controller which always participate in the phase model.
someone please correct me for the last statment if i am wrong.
Edited by: kranthi kumar on Dec 31, 2010 11:37 AM

What is the use of axis input for set rotation.vi

in the attached vi if i give axis as ( 1 , 0 , 0 ) and angle to some 10 object is rotating 10 degrees
if i keep axis as ( 20 , 0 , 0 ) also and if i am giving angle as 10 then also object is rotating 10 degrees only
so for the set rotation.vi what the input axis is exactly doing ?
thank you
Attachments:
set rotation.vi ‏8 KB
set rotation.vi ‏8 KB

A distribution set is needed when you want to configure distributed costing.

What is the use of "Organization" and "UserGroup" in Oracle Identity Mgr

Hi
I have created an user and provisioned it with an EBS instance.
Can anyone explain what is the use of "Organization" or "User Group" in Oracle Identity Manager?
What are the basic concepts of having them?
It seems that "Organization" is simply used for categorization of Users in OIM into various orgs and sub-orgs with the aim to create a logical hierarchy of users.
Anything more?
The use of "UserGroups" i find is only for the application of Access Policies and nothing else.
Please modify/add to the concepts.
Thanks
debashis

You can use Organizations to seperate groups of users and limit which resources are available to the users in that organization. You can also create administrative groups over those organizations.
Groups can contain membership rules to automatically place users into them based on attributes from their profile. You can also create access policies to apply to those groups to provision and restrict provisioning of resources. Groups can also be beneficial if you have department groups and such to be able to quickly view all the users who are part of it. Groups are also used during attestation and can be made process owners of the attestation tasks. And Groups can also be used for assignment of tasks such as approvals and provisioning tasks. Groups are also how permissions are assigned throughout OIM.
I'm sure there are many more uses, but this is a few of them.
-Kevin

What is the use of services for object icon (attachment) in customer master

Hello,
What is the use of the icon in customer master i.e. service for object(attchment)
Any idea In which table those attachemnts stores,
In SAP i can see only temp. structure table SGOS_ATTA when i look for table information, so i dont know where to look for these files although i tried great selection of tables which either were empty
Thnks,
Ahamad S

Please search the forum or Google with the same text so that you will find many times this has been discussed. Please go through the forum rules which you can see to your right screen and adhere to that. Being an old member, no need to stress this.
G. Lakshmipathi

What can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for VZW on Sept 8?

what can I use my Droid Charge for, after I upgrade to the new Samsung Galaxy S2 for Verizon on September 8?
I guess it can run fine on Wi-Fi and become a media player.... or is there a market for 1-month-old Droid Charge phones?
How much trade-in value can I get from VZW or BestBuy or Amazon?
Thanks!

http://www.droid-life.com/2011/08/03/leaked-verizon-roadmap-reveals-potential-launch-dates-for-stratosphere-vigor-bionic-and-more/
DROID Bionic: (9/8 launch) – You already know everything about this device, don’t you?
Samsung Stratosphere: (9/8 launch) – 4G LTE device running Android 2.3
HTC Vigor: (10/6 launch) – Will replace the HTC Thunderbolt
LG Revolution 2: (10/20 launch) – Will replace the original Revolution
Samsung Galaxy Tab P8 (November launch) – Could be the 8.9″ Galaxy Tab?
Samsung Illusion: (9/29 launch) – 3G smartphone running Android 2.3
Samsung Plato: (January launch) – whatever it is, it was pushed to 2012
HTC Bliss: (9/29 launch) – Lower end Android 2.3 device; the chick phone?
Motorola XOOM 4G LTE: (9/8 launch) – Assuming this is the date that the 4G LTE upgrade starts. Also when the 4G LTE version will be in stores.

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

What is the use of FOR ALL ?

What is the use of FOR ALL ?. Need clear explanation with examples

http://www.oracle.com/pls/db112/portal.portal_db?selected=5&frame=#sql_and_pl_sql_languages
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/tuning.htm#i48876
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/tuning.htm#i54218
Straight SQL operations are faster, but if you can't write those for some reason bulk operations are not quite as slow as PL/SQL loops.

What is the use of for all entries in select statement

what is the use of for all entries in select statement

hi,
FOR ALL ENTRIES is an effective way of doing away with using JOIN on two tables.
You can check the below code -
SELECT BUKRS BELNR GJAHR AUGDT
FROM BSEG
INTO TABLE I_BSEG
WHERE BUKRS = ....
SELECT BUKRS BELNR BLART BLDAT
FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSEG
WHERE BUKRS = I_BSEG-BUKRS
AND BELNR = I_BSEG-BELNR
AND BLDAT IN SO_BLDAT.
*******************************8
look another example
what is the use of FOR ALL ENTRIES
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
Hope this helps!
Regards,
Anver
<i>if hlped pls mark points</i>

What is the use of custom properties for terms in term store management of SharePoint 2013

Similar Messages

Maybe you are looking for