What is the use of delet set up table in lo **** pit, exactly what happenda

what is the use of delete set up table in lo **** pit, exactly what happened if we do the process, is all tables will lose their data which r available in functional module,
Why i'm asking this, because we assign functional module in LBWG.
plz .......
thanx
vidhu

HI Vidhu,
Initially we don't delete the setup tables but when we do change in extract structure we go for it. We r changing the extract structure right, that means there are some newly added fields in that which r not before. So to get the required data (i.e.; the data which is required is taken and to avoid redundancy) we delete n then fill the setup tables.
To refresh the statistical data. The extraction set up reads the dataset that you want to process such as, customers orders with the tables like VBAK, VBAP) & fills the relevant communication structure with the data. The data is stored in cluster tables from where it is read when the initialization is run. It is important that during initialization phase, no one generates or modifies application data, at least until the tables can be set up.

Similar Messages

What is the use of T. code cj8g

Hi All,
Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
Thanks in Advance.
Chandu

CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas

What is the use of Inner class.?

hello everyone.........
I want toknow that what is the use of Inner class...?

Judging from what's seen around here? Mainly obfuscation.

Our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

Just use the same one on all devices.

What is the use of the setter dependency injection in Spring?

What is the use of the dependency setter injection ?
In a database driven app, I retrieve results, use the javabeans set methods to save stuff in javabeans and then call get on it.
What is the use of having something set externally from a xml already ?
Can someone provide an example when the setter injection can be used?
I wouldnt imaginge using it to get usernames, passwords, databaseurl because we use JNDI for that...
Is the dependency setter meant as something additional to web.xml so you dont have to get params from web.xml?

No, you would indicate in the XML that the Hibernate object and the TransactionFactory (I am being vague here) have a dependency. You then specify whether you want setter or constructor injection. When Spring creates the Hibernate Object, it will attempt to also create a TransactionFactory and pass that to the Hibernate Object's setter. "Auto-wiring" them together for you.
- Saish

What is the use of setting null values to Objects?

What is the use of setting null values to Objects?
regards,
namanc

It's more of a safety trap within java to handle the "programmers are still humans" exception.
String myname;
// print what???? Forgot to initialize the name!
System.out.println(myname);Java will complain about myname not being initialized. It won't when you do this:
String myname = null;
// allright, your name is null
System.out.println(myname);In the second case you are showing to java that you know what you are doing.

What are the Pre-requisite to set Deletion Flag for Maintenance Order ?

Hi Gurus,
              Pls give me what are the pre- requisite to set the deletion flag.
              I want to set deletion flag to some Maintenance Orders which are with notification, but deletion flag - SET,RESET Indiacaors are inactive.
              Following are my observations-
              1) Order is not yet released.
              2) No actual Cost is with the order.
              3) No PR and POs are with the Order.
Pls guide me.
With best regards,
narendra

hi
you can put the deletion flag only when the order has the status CLSD or the balance of the order must be Zero
you can refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm
regards
thyagarajan

TS3367 I own iPad mini and iPhone 4. I'd like to use FaceTime to talk to my partner whilst I'm in hospital. What's the best way of setting it up. Can I use my apple username for both devices?

So have iPad mini and iPhone. But I'd like to leave my iPad with my partner whilst I'm in hospital so we can FaceTime each other.
What's the best way of setting this up!

http://support.apple.com/kb/HT4319

What is the use of t-code MD74 - Reorganising independant requirements

what is the use of t-code MD74 - Reorganising independant requirements

basically it to delete the unwanted PIR for the last period.
Let us say you planned PIR for 100.
At the end of Period the total salae order were 90, PIR shows 10 excess, this has to be deleted. We can do it manually, but this can be done collectively
pl go through the link below
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
With the reorganization function, you can delete planned independent requirements for which there are no sales orders in the database. You can delete the planned independent requirements history.
A key date is required to carry out reorganization which is calculated as follows: the system checks whether a reorganizing interval is maintained in Customizing for the plant that you want to reorganize. If an interval is maintained for this plant, the system uses this information to calculate the key date. If no interval is maintained for this plant, the system checks whether intervals are maintained for any other plants, and selects the largest interval to calculate the key date. You can change the key date proposed in the initial screen for reorganization.
You can change the proposed key date when deleting the history. You can set a shorter interval for deleting histories than for deleting the requirements records.

What is the use of 'keep' parameter in BDC

Hi
In BDC while transfering data, what is the use of 'keep' parameter in BDC.

Hi Jyothsna,
In the function module BDC_OPEN_GROUP, the EXPORTING parameter KEEP acts as a deletion indicator for session in which the batch data executed.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = FILLER12
HOLDDATE = FILLER8
 KEEP = FILLER1
---
KEEP retains the session after successful processing if its value is set to 'X'. A session that is kept remains in the input/output queue until an administrator deletes it in SM35 transaction.
Sessions that contain errors in transactions are kept even if KEEP is not set.
Default: If not set, then sessions that are successfully processed are deleted. Only the batch input log is kept in SM35 transaction.
Hope this sort out your query.
PS If the answer solves your query, plz close the thread by rewarding points to each reply.
Regards

What is the use of variant in the alv report

hello all,
what is the use of variant in the alv report

Hi,
For Variants
follow the link:
http://help.sap.com/search/highlightContent.jsp
Variants allow you to save sets of input values for programs that you often start with the same selections. You can use them for any programs except subroutine pools (type S).
Contents
Variants: Overview
Initial Screen
Displaying a Variant Overview
Creating and Maintaining Variants
Creating Variants
Attributes of Variants
Changing Variants
Deleting Variants
Printing Variants
Variable Values in Variants
Creating Variables for Date Calculations
User-specific Selection Variables
Creating User-specific Variables
Changing Values Interactively
Changing Values from the Program
Fixed Values from Table TVARV
Creating Table Variables from TVARV
Changing TVARV entries
Running a Program with a Variant
Variants: Overview
Use
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, see Working with selection screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant.
You can create any number of variants for any program in which selection screens are defined. Variants are assigned exclusively to the program for which they were created.
You can also use variants to change the appearance of the selection screen by hiding selection criteria. This is particularly useful when you are working with large selection screens on which not all of the fields are relevant.
Reports, module pools, and function groups may have several selection screens. It is therefore possible to create a variant for more than one selection screen.
Variants are an interface between the user and the selection screen. They can be used both in dialog and in background mode, although their uses are slightly different.
Variants in Dialog Mode
In dialog mode, variants make things easier for the user, since they save him or her from continually having to enter identical values. They can also make the selection screen easier to read, because you can use them to hide input fields. Running an executable program with a variant containing an optimal set of values also reduces the capacity for user error. The optimized database selections speed up the runtime of the program.
Variants in Background Mode
Variants are the only method for passing values to a report program in a background job. Therefore, when you run a program in the background, you must use a variant (or SUBMIT... VIA JOB). To avoid you having to create a new variant each time you run the report, ABAP contains a mechanism allowing you to pass variable values to variants. See variable values in variants.
To ensure that an executable program is always started using a variant, you can specify in the program attributes that the program may only be started in this way.
Features
Creation of variants
Display, change, copy, print, and delete variants
Use and definition of variables in variants
Variable date calculation
User-specific fixed values
Fixed values in table TVARV
You access the variant maintenance tool from the initial screen of the ABAP Editor. Enter the name of the program, select Variants in the Sub-objects group box, and then choose Display or Change.
Functions
The above screen allows you to:
Create variants
Display the variant directory
Display and change values and attributes
Copy, delete, and rename variants
Before creating a new variant for a program, you should check whether you can use or adapt an existing variant instead.
There are two ways to display variants:
Position the cursor on the Variant field on the initial screen and press F4. The following dialog box lists all of the available variants:
Choose Variants ® Directory on the initial screen:
Creating Variants
Prerequisites
You must have defined one or more selection screens for the relevant program. The program may have any type except type S.
Procedure
On the initial screen of the ABAP Editor, enter the name of the program for which you want to create a variant, select Variants in the Sub-objects group box, and choose Change.
On the variant maintenance initial screen, enter the name of the variant you want to create.
Note the naming convention for variants (see below).
Choose Create.
If the program has more than one selection screen, a dialog box appears in which you can assign the variant to one or more screens. The dialog box does not appear if the program only has one selection screen. In this case, the selection screen of the program appears straight away.
If there is more than one selection screen, select the screens for which you want to create the variant.
Example:
If you choose Variant for all selection screens, the variant also applies to any selection screens that you create after creating the variant.
Otherwise, the variant only supplies values to the selection screens that you select in the list.
Choose Continue.
The (first) selection screen of the program appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them. If you keep scrolling forwards, the Continue button appears on the last selection screen.
Enter the required selections, including multiple and dynamic selections.
Choose Continue.
Result
When you have finished, an overview screen appears (ABAP: Save Attributes of Variant), on which you can enter the attributes of your variant and save it.
Note that when you create a new variant, you must enter both values and attributes.
Names of variants: Names can consist of up to 14 alphanumeric characters. The "% " character is not allowed. If you want the variant to be transported automatically with its program, you must create a system variant. The name of a system variant starts "CUS&" for customers, and "SAP&" for SAP system variants. You can only use the "&" character within this prefix in the name of a system variant. It may not occur in any other context. System variants are administered by the Workbench Organizer. Although you can create and access variants from any client, they are always stored in client "000".
Creating Variants
Prerequisites
You must have defined one or more selection screens for the relevant program. The program may have any type except type S.
Procedure
On the initial screen of the ABAP Editor, enter the name of the program for which you want to create a variant, select Variants in the Sub-objects group box, and choose Change.
On the variant maintenance initial screen, enter the name of the variant you want to create.
Note the naming convention for variants (see below).
Choose Create.
If the program has more than one selection screen, a dialog box appears in which you can assign the variant to one or more screens. The dialog box does not appear if the program only has one selection screen. In this case, the selection screen of the program appears straight away.
If there is more than one selection screen, select the screens for which you want to create the variant.
Example:
If you choose Variant for all selection screens, the variant also applies to any selection screens that you create after creating the variant.
Otherwise, the variant only supplies values to the selection screens that you select in the list.
Choose Continue.
The (first) selection screen of the program appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them. If you keep scrolling forwards, the Continue button appears on the last selection screen.
Enter the required selections, including multiple and dynamic selections.
Choose Continue.
Result
When you have finished, an overview screen appears (ABAP: Save Attributes of Variant), on which you can enter the attributes of your variant and save it.
Note that when you create a new variant, you must enter both values and attributes.
Names of variants: Names can consist of up to 14 alphanumeric characters. The "% " character is not allowed. If you want the variant to be transported automatically with its program, you must create a system variant. The name of a system variant starts "CUS&" for customers, and "SAP&" for SAP system variants. You can only use the "&" character within this prefix in the name of a system variant. It may not occur in any other context. System variants are administered by the Workbench Organizer. Although you can create and access variants from any client, they are always stored in client "000".
reward all help full answers

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

What is the use of delet set up table in lo **** pit, exactly what happenda

Similar Messages

Maybe you are looking for