What is the use of Update type used with call transaction statement?

What is the difference between following option of call transaction-
'A' (asynchronous update)
'S' (synchronous update)
'L' (local update) ???
Regards,
GURU

In synchronous method incase if there is any change in the table all the related tables will be changed accordingly and then sy-subrc will be returned.In
asynchronous method in case if there is any change in the table the s-subrc will be immediatel returned and then the related tables will be updated. the diffrence between these two is in asynchronous even if the related tables are not updated the sy-subrc will still be returned as 0.
Reward if it is ok
Siva Kumar

Similar Messages

What is the use of NACE transaction in scripts?

hi
what is the use of NACE transaction in scripts?
bye

NACE is the transaction code where you can maintain the output types for the applications...
NACE - Initial Customizing Screen
where your going to attach the layout which u have designed to the particular output type - Specifies the kind of output to be produced.
The output type can specify, for example, a printed form that you need for internal use or a form that you want to send to a customer or vendor (for example, an order confirmation). The output type can also be an internal electronic mail message that you want to send to staff in another department.
print program - If you want to inform a partner about changes to output that was already issued, you enter the name of a program and a routine in the Form routine field.
The routine in the program checks which changes should result in a changed output being sent.
regards

What is the use of at new statement?

What is the use of at new statement?

Hi,
AT - itab
Syntax
LOOP AT itab result ...
[AT FIRST.
 ENDAT.]
 [AT NEW comp1.
 ENDAT.
 [AT NEW comp2.
 ENDAT.
 AT END OF comp2.
 ENDAT.]
 AT END OF comp1.
 ENDAT.]
[AT LAST.
ENDAT.]
ENDLOOP.
Extras:
1. ... FIRST
2. ... |{END OF} compi
3. ... LAST
Effect
The statement block of a LOOP loop can contain control structures for control level processing. The respective control statement is AT. The statements AT and ENDAT define statement blocks that are executed at control breaks, that is, when the control structure is changed. The additions to the AT statements determine the control break at which their statement blocks are executed. Within these statement blocks, the statement SUM can be specified to add together the numeric components of a control level. For the output behavior result, the same applies as for LOOP AT.
The prerequisite for control level processing is that the internal table is sorted in exactly the same sequence as the component of its line type - that is, first in accordance with the first component, then in accordance with the second component, and so on. The line structure and the corresponding sorting sequence gives a group structure of the content of the internal table, whose levels can be evaluated using AT statements. The AT- ENDAT control structures must be aligned one after the other, in accordance with the group structure.
The statement blocks within the AT- ENDAT control structures are listed if an appropriate control break is made in the current table line. Statements in the LOOP- ENDLOOP control structure that are not executed within an AT- ENDAT control structure are executed in each pass of the loop.
In order that control level processing is carried out properly, the following rules must be observed:
After LOOP, a restricting condition cond can only be specified if this selects a consecutive line block of the internal table. Otherwise, the behavior of control level processing is undefined.
The internal table cannot be modified within the LOOP loop.
A work area wa specified in the LOOP statement after the addition INTO must be compatible with the line type of the table.
The content of a work area wa specified after the addition INTO in the LOOP statement must not be modified.
If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa.
Addition 1
... FIRST
Effect
The control level is defined by the first line of the internal table. The control break takes place when this line is read.
Note
In the group level AT FIRST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Addition 2
... |{END OF} compi/>
Effect
: Control levels are defined by the beginning or end of a group of lines with the same content in the component compi (where i = 1, 2, and so on) and in the components to the left of compi. The control breaks take place when the content of the component compi or another component to the left of compi changes.
The compi components can be specified as described in Specification of Components, with the limitation that access to object attributes is not possible here.
Note
If the INTO or ASSIGNING additions are used in the LOOP statement, a field symbol can be entered after AT |{END OF} outside classes, to which the corresponding component of the work area wa or the field symbol <fs> is assigned. This form of dynamic component specification is obsolete and has been replaced by specification in the format (name).
Addition 3
... LAST
Effect
: The control level is defined by the last line of the internal table. The control break takes place when this line is read.
Note
In the group level AT LAST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Regards,
Prashant

What is the use of OASV transaction in Asset accounting

Dear Experts,
Could you please advise me clearly what is the use of OASV transaction in Asset accounting and which GL account we need to use for debit and credit while using this t code. Can you please provide me along with examples for better understand and that would be great for me.
Thanks in Advance,
Murali

Transfer Balances
In this step you can post balances to G/L accounts which have already been defined as reconciliation accounts. You can only post these corrections in company codes which have implementation status.
The transfer of legacy asset data using the legacy asset transaction does not affect the balances of the corresponding reconciliation accounts in Financial Accounting. Therefore no automatic balance formation or reconciliation takes place and you will need to manually reconcile the balances. You can ascertain the Asset Accounting values using of the asset list. When you start this report, specify January 1st of the current fiscal year as the report date. The system will then provide data as of December 31st of the previous fiscal year (in other words, no depreciation from the current fiscal year is included).
Activities
Copy the balances from any suspense accounts to the Asset Accounting reconciliation accounts.

What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?

Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.

HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days

How to create the item creation in the oracle apps what is the use with that

hi
friends please send ans to me for this with real time scenario

How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002
> with real time scenario
what is difference between non-real time scenario & real time scenario?

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

What is the use P type variable in ABAP?

ex:
data <variable name > type p decimals 2.
here what is the use of declaring it to p type.
what is the difference between p type and float type.

Hi,
using packed variable we can decide the length of number and number of decimals we want in o/p which is not possible with other types
Packed numbers - type P
Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
You can use type P data for such values as distances, weights, amounts of money, and so on.
Floating point numbers - type F
The value range of type F numbers is 1x10*-307 to 1x10*308 for positive and negative numbers, including 0 (zero). The accuracy range is approximately 15 decimals, depending on the floating point arithmetic of the hardware platform. Since type F data is internally converted to a binary system, rounding errors can occur. Although the ABAP processor tries to minimize these effects, you should not use type F data if high accuracy is required. Instead, use type P data.
You use type F fields when you need to cope with very large value ranges and rounding errors are not critical.
Using I and F fields for calculations is quicker than using P fields. Arithmetic operations using I and F fields are very similar to the actual machine code operations, while P fields require more support from the software. Nevertheless, you have to use type P data to meet accuracy or value range requirements.

What is the use and functionality of a message type

Hi,
I am new to abap. Can anybody tell me what is the use of the message type? What is it used for?
There is an interface which is using an extended idoc type ZFIDCCP02 (Basic Type FIDCCP02). This extended idoc type is used for other interfaces and the interface in question. However the other interfaces are using the standard message type FIDCC2, but the interface in question is using a customized message type.
Any idea what could be the reason?
Thanks in advance.
Mick

Hi Mick,
Message type tells the about the actual meaning of Idoc..
later if you want to send data to external system the idoc type or extension type is not used..
the message type is used for rest of the process..
Idoc type is know as structure..
<< Cut and paste without attribution from http://www.*******************/2009_01_01_archive.html removed >>
<< Cut and paste without attribution from http://searchsap.techtarget.com/sDefinition/0,,sid21_gci852485,00.html removed >>
<< Points unassigned >>.
Regards,
Prabhudas
Edited by: Prabhu Das on May 14, 2009 8:38 PM
Edited by: Rob Burbank on May 25, 2009 4:30 PM

What is the use of step type Block in ecc.6

what is the use of step type Block in ecc.6. What ca i do with that.

You can group together steps in a Workflow in a block. You have the following options for a block and the steps it contains:
·        Define local data (local container)
·        Define deadline
·        Define exceptions and exception handlers
·        Define dynamic processing (parallel or sequential)
In the Workflow definition, a block is represented by the following symbols: Block Start and Block End .
give points to valuable answers

What is the use of Framework Order type purchase order ?

what is the use of Framework Order type purchase order ? How it differs from other regular type?

Hi,
The document type of Framework Order is "FO" .The regular use of document type for purchase order is "NB".The use of "NB" and "FO" Document type in Purchase order to differentiate the how your material behave or to have different different purchasing document.
Example:Document type "NB" have to the process like Goods Receipt,inoice receipt & payment .In the case of Document type "FO" no Goods Receipt required but IR and payment have to be done."FO"(Framework Order) only deals with low value item with validity period as well as the limits on value/price.
Hope helpful to you and then reward.
Regards,
Biju K

What is the use of with and without marker update?

what is the use of with and without marker update?

Hi,
Marker Update Updates the stock values and NO Marker does not.
Generally BX upload has to be compressed with MU and BF(and UM) delta init has to be compressed with NO MU because Stock was updated with BX. And delta loads of BF and UM has to be compressed with MU because these brings new Material movements which will has to give effect to stock.
With rgds,
Anil Kumar Sharma .P

What is the use of initial value in a database table?

Hi can anyone help me in knowing what is the use of initial value which is present besides primary key while creating a table?

Initial Value:
Indicator that NOT NULL is forced for this field
Use
Select this flag if a field to be inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field.
Please note that fields in the database for which the this flag is not set can also be filled with initial values.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.
Restrictions and notes:
The initial value cannot be set for fields of data types LCHR, LRAW, and RAW. If the field length is greater than 32, the initial flag cannot be set for fields of data type NUMC.
If a new field is inserted in the table and the initial flag is set, the complete table is scanned on activation and an UPDATE is made to the new field. This can be very time-consuming.
If the initial flag is set for an included structure, this means that the attributes from the structure are transferred. That is, exactly those fields which are marked as initial in the definition have this attribute in the table as well.
hope it helps,
Saipriya

What is the use of CTU_PRAMS in bdc programming?

what is the use of CTU_PRAMS in bdc programming?
can any explain wit a sample code.

Hi,
Hi,
If u write table control bdc program in 14'' monitor screen, then if the same program u run at different monitor size, then the screen resolution problem comes in to the picture,
like, u get 5 records in table control in one screen, and some other records in other screen, to avoid this screen resolution problem we use CTU-PARAMS Structure.
In ur program u have to set
defsize type ctu_params-defsize value 'X',
Then u will be free of screen resolution problem.
Fill the str CTU_PARAMS-defsize = 'X' and pass in CTU stmnt as
call transaction 'XXX' options using t_bdcdata ctu_params.
Analysing :
1. If nothing works, then we have to
some ifs & buts.
2. There shall be normally
2-4 different kinds of resolution
on various users comptuers.
3. Based on this,
we have to know beforehand,
what will be the number of rows
in the table control.
4. The user can be given
a selection/paraemter
for resolution
eg. 800x600
1024x100
axb
etc.
5. Based on this, we will hardcode
in the program (based upon our knowledge/recording
which we have seen and done)
we will hardcode
the number of lines
in the VARIBLE.
6. Then we can simply use this variable
for our LOOP and logic purpose.
7. It will be the responsibiltiy of the
use to CHOOSE THE CORRECT resolution,
on the selection-screen.
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data

What is the use of Update type used with call transaction statement?

Similar Messages

Maybe you are looking for