What is Windows 10's effect on devices that use WIMboot?

I have an HP Stream that uses the WIMboot feature to reduce space taken by the operating system. I'm curious if anyone else has tried Windows 10 with a device that uses WIMboot, and any effect it might have on the images stored on the device.

Hi Entegy,
Due to the resource limitation, I cannot test such feature, but you can refer to this youtube video:
Windows 10 Preview Ent with WIMBoot
https://www.youtube.com/watch?v=HEME0nAP1RU
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
In my personal opinion, wimboot is the same feature with Windows 8.1 Update 1.
Alex Zhao
TechNet Community Support

Similar Messages

  • WHY, when I have nothing plugged in does Windows flag up a USB device that is does not recognise?

    WHY, when I have nothing plugged in does Windows flag up a USB device that is does not recognise?  When I check it a box comes up which offers a diagram that does not tell me which port it is?  How do I check which port/outlet it actually is? Could
    there be software (rather than a USB port) in my system that Microsoft doesn't recognise? The Windows defender scan shows nothing and the Windows reporter said twice now there are 10 problems but they can't report back right now.  Should
    I be worried?  What should I do?  Everything I want to do within the operating system seems to be working and my speed hasn't noticeably changed.  Can anyone help?
    PS What is code 43?  Also it says Broadcom 270 Bluetooth is disabled, what does that do?  Should I enable it, won't it allow Bluetooth access, which I don't need?  The scanning of hardware seems to say Hardware changes may not have been detected
    as well as Unknown Device is not working properly.

    Some phones can only send and recieve SMS messages. If the recipients phone doesn't support MMS they won't be able to recieve a text with a photo.
    To get your photos in Photo Stream, you'll need to setup iCloud. Check out this Apple article for more info -> iCloud: Photo Stream FAQ

  • List of SAP  Certified Handled devices that use windows CE ( Latest Version

    Hi ,
    Can anyone let me know the List of SAP  Certified Handled devices that use windows CE ( Latest Version )
    This is very urgent
    Regards
    Abhilash

    Hi,
    If you are looking to run mobile applications on a PDA with windows mobile 5.0 latest version, then i would request you to check the product availability matrix for the respective mobile client. Like it depends on the client framework because mobile client framework is one thing you need to check upon.
    For eg. if you are using Mobile infrastructure 7.0(netweaver 2004s) or mobile infrastructure 2.5(netweaver 2004) then you need to check the respective mobile client 7.0 or 2.5's product availability matrix in the supported devices section or you can even search notes for the same. So it is difficult to say a list of devices until and unless you tell your environment and the versions used.
    Hope this helps.
    Best Regards,
    Siva.

  • How can I find the devices that use my Apple ID

    I Need to find the devices that use my apple ID

    Store > View Account.  On the Account Information page, click on Manage Devices, and you will see the list.

  • TS4083 Is there a way to have my Icloud delete my emails on all apple devices that use I cloud? If I delete them on my Iphone, they do not delete on my Ipad and vice versa

    I cant figure out how to set up Icloud to delete my emails on all my apple devices that use icloud. Any help would be greatly appreciated.

    I frequently have emails that I delete on my mac but are not deleted from the iPhone/iPad (this is for an iCloud account,  @mac.com).  In time they eventually delete, but it can take time.  I usuall delete them from the devices as well.

  • Can I have one itunes account, but have two devices that used different email accounts?

    I have an iPad2 and want to buy an iPod Touch for my daughter.  I want it to use her email address, but use my itunes account.  Can that be done?

    The Apple/iTunes ID (which is a email address) is seperate from any mail accounts yu have on the iPod/iPad.  Both devices can use the same Apple/iTunes ID but have different email address for the mail accounts on the devices.

  • On versions 4, what happeded to the Stop Loading "X" command that used be on the upper-left toolbar?

    I just downloaded Ver. 4.0. After doing so, I've noticed that the Stop Loading command, the X that used to reside in the upper left of the toolbar, is now gone. I've searched, but cannot find a process for replacing it. This used to be a valuable tool for me as I"m on dial-up. I use it to stop my current page from loading so I can jump to another site thus allowing it to load faster.

    Firefox 4 no longer shows a Reload and Stop button on the Navigation Toolbar, but has a button on the right end of location that shows the different states. During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Stop button. If you type in the location bar then that button becomes a Go button.<br />
    You can middle-click that button to duplicate the current tab to a new tab.
    If you want the previous appearance back then you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Move the Reload and Stop buttons to their previous position at the left side of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

  • How to deploy a J2ME app in actual device that uses RMS?

    Hi,
    Apologies if the post is in the wrong place.
    I have a MIDlet suite that uses RMS. The application would use certain data that comes from those .db files. The cliche is that the data should pre-exist in a .db file (I enter the data in the .db file through a separate MIDlet and close the RecordStore) prior to running the application for the first time in the device. Now I cannot understand how should I ship the .db file along with the .jar. Should I bundle it with the jar? And is there any device specific implementations?
    Thanks in advance.
    Regards,
    Kalyan

    Thank you for your answer, I am now creating the record store within the startApp() of my MIDlet. would you please read the following article
    at
    http://www.javaworld.com/javaworld/jw-05-2005/jw-0502-midp_p.html
    Can you please explain which data files are they talking about?

  • Installing Windows 8 using WDS on devices that use UEFI BIOS

    Hi all, sorry for the word wall.
    I am currently planning a deployment of Windows 8.1 Upgrade 1 on Toshiba Z10T's which I will be deploying using WDS, which is running on Windows Server 2012 R2.
    The Toshiba Z10T device in question is quite handy as it can switching between legacy CSM BIOS and UEFI BIOS.
    The devices are shipped out of the box with UEFI BIOS on, and obviously we would like to be able to just un-box & image them, however we have constant issues when trying to PXE boot devices with UEFI BIOS, and the only way I can get them to PXE boot
    is by switching over to legacy CSM BIOS.
    From what I have read from other forums on the internet, UEFI & WDS don't get on that well - so what I was wondering is this-
    We currently have SCCM 2012- I was wondering would we have more success booting to a UEFI BIOS if I used SCCM & MDT or will I still encounter the same issues?  Is it the PXE client in UEFI that is at fault?
    Problems that we encounter when we use UEFI to PXE boot are- Drivers not there to get into to the boot image; if we can get them to image, devices will not join to the domain; devices will image but not install any drivers.
    Thanks for reading this word wall.

    PXE itself doesn't use/need any drivers at all - it's the post-boot (boot image), and the full OS (install image) which need the drivers.
    PXE is totally contained within ROM, and that ROM will download the NBP (for non-UEFI this is typically wdsnbp.com)(for UEFI this is typically bootmgfw.efi).
    In a ConfigMgr (or MDT) scenario, the NBP then downloads boot.sdi, boot.wim(WinPE) and then install.wim(Full OS).
    Both boot.wim, and install.wim, need to have the correct network card drivers and also the correct storage controller drivers installed.
    This is how Windows deployment via PXE works (it's most often the lack of the correct drivers, at the required stage/phase, which causes grief)
    [background]
    Although we have a small number of Z10Ta and Z10Tb devices in my organisation, we are still using the factory image on them, so I haven't spent the time to incorporate them into our ConfigMgr OSD (PXE) supported-list yet.
    We are just starting our journey towards UEFI-boot. We are using MDT UFD bootable media for our lab and it's working fine for UEFI and Win8.1/64bit, on various devices (although not tried the Z10Ta/b). Am nearly finished moving that all into ConfigMgr, to
    then begin testing it all with PXE.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • What are the best video effects or presets to use for HD video?

    I use Premiere Pro often, usually to direct music videos of different genres. I used CS6 for a while, until just now upgrading to Creative Cloud.
    Anyway, I just want people's suggestions on what effects, presets, or anything to use to make video look good!
    The video I use it 1080p HD, but I know there's ways to make it look even better than it already does, please give me any suggestions you have! thank you!

    No rules or limits to what one would use to make something "look good".
    Different FX and treatments  in different hands on different material...too many too list.
    Start with great images, great performance and direction...and Color Correction.
    Craft the film as to how you saw it before you shot it.
    Dont use others presets.

  • What happend windows server have cpu to 100% or use ram is 100% and disk space is zero

    what happend with windows server without local resources,  what happend with the users conect to server: sqlserver, team foundation server, IIS, etc

    I'd locate the disk space issue as first step. May be out of control log files for IIS or other application.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • HT5622 I have two iPhones using the same Apple ID. I want to change the ID on one of the phones without changing the other. Can it be done without affecting the other devices that use the ID.

    How can I change the Apple ID on one phone but the other. Right now they both use the same ID.

    Sure.
    For the iTunes/App store...Settings>iTunes/App Store...tap the ID shown, sign out...now, sign back in with the ID you want to use. Be aware, any apps obtained with the old ID can only be updated using that ID, as all apps are forever tied to the ID used to obtain them.
    Fir iCloud: Settings>iCloud...turn everything off, including Find My Phone. For Contacts/Calendars, you'll be prompted to keep the data on the phone or delete it...your choice. Then, scroll down, Delete Account. Now, set everything back up using the new ID.
    This won't affect any data stored at iCloud.com, or any other devices.

  • HT5622 facetime not connecting to all devices that use the same apple id.  I have both an iphone and ipad.  Incomin facetime calls connect randomly to one or the other or both.  (should be coming to both)

    I have an iPad and an iPhone, both registered to same AppleID.  Incoming Face time calls ring randomly on one or the other or both (and sometimes none). They should ring on both.

    check the 'recieve at' addresses you set in settings, facetime.  you can have multiple addresses. 
    On mine, i have thre addresses set the same.  I am using both a phone # and my e mail address  (neither one is my apple ID, by the way).
    If somebody calls me to FT using the phone #, the phone rings first, followed by the pad, about 10 sec later.  If they call using the e mail address, they both ring at about the same time.  If one or the other answers, the other device stops ringing. 
    So next time a call comes, wait a bit before answering to see if the other device responds.  and check your receive at addresses.  
    You might want to test a little - have somebody call using one address, or the other, and see if you can track the behavior.

  • What is the best way to deploy application that uses web services?

    Hi all,
    I'm having some problems figuring out the best way to deploy our app now that we've switched over to using web services.
    I'm fairly new to Java and web services. From what I understand, JNLP and WebStart are methods to deploy Java clients to users and not for creating war files and the like.
    Here's a little background:
    We have a large PowerBuilder/Oracle application. The db consists of over 500 tables and the client consists of several thousand PB components. A user creates "transactions" which contain a series of "sub-transactions" within. Most of the data is collected and stored locally in the client in a series of datastores. When the "finalize" happens, the records are validated and sent to the database.
    We are in the process of moving each of the subtransactions (currently in the PB client) into subPROCESSES on a java project. We are using the JAX-WS framework to develop the web services in Netbeans. These web services aren't much more than remote xml as the messaging technology. For writing data back to the database, we are using the Java Persistence API to function outside of an EJB container but will shortly be migrating to the Glassfish application server to use several of the EJB container frameworks including the EntityManager.
    We haven't attempted any type of deployment and are unsure of where to start. Any suggestions would be so helpful and appreciated!
    Thanks!
    Edited by: doubleEspresso on Jan 10, 2008 8:06 AM

    >
    I'm fairly new to Java and web services. From what I understand, JNLP and WebStart are methods to deploy Java clients to users and not for creating war files and the like. >Correct, while Java Web Start has 'web' in the name, it has little if anything to do with web applications - certainly not providing much toward their installation. It is for launching rich client GUI based (AWT, Swing, SWT..) applications onto the end-user's desktop.
    There are some parts of JWS that might seem peripherally useful to the installation of a web-app., but it is really not a 'good fit'.
    >
    ..Any suggestions would be so helpful and appreciated!>You might try the forums for the 'web tier' APIs.
    <http://forum.java.sun.com/category.jspa?categoryID=20>
    Or perhaps the forum 'Java Technologies for Web Services' (under 'enterprise technologies')
    <http://forum.java.sun.com/forum.jspa?forumID=331>
    This one in 'BigAdmin' seems particularly relevant, 'Set up and Deploy'
    <http://forum.java.sun.com/forum.jspa?forumID=550>

  • I'm using the great Firefox 5.o. What happened to the "Bookmark All Tabs" feature that used to be found under Bookmarks? I love Mozilla Firefox!!!! :-)

    I've looked under the Bookmarks heading as well as History. What happened to the extremely useful "Bookmark All Tabs". Loved that feature of Firefox. Thank you!!!!!!

    Right-click '''on''' a Tab to see that menu item or use {Ctrl + Shft + D}.
    In conjunction with the new Firefox button in Firefox 4.0 and with the addition of some new features that added a number of new menu items, many of the older menu items were moved around or only appear under certain conditions. It can be a bit confusing until you get used to the changes, but beyond adding new menu items in the future for new features, I don't think there will be major changes like that for awhile.

Maybe you are looking for