What is WLAN connectivity, how to use it for inter...
hi all
i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
thanks/regards
Chandrakant Rajolkar
This will get you started.
http://en.wikipedia.org/wiki/Wireless_LAN
Check your user manual.
http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009
Similar Messages
-
I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?
I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
When I am playing a song, the "airplay" button isn't even visible.
I am sure that the apple tv setting is on as well. Is there anything else you can help me with? -
What type of connection should i use?
Not sure if i should i post this here or web tier api's, but here goes...
I have a servlet in a tomcat webserver and i want it pass information between it and a standard j2se application running on the same machine.
I'm not sure what type of connection i should use?
DataStream?
Socket?
HttpConnection?
Any other recommended method?
Or if i need a network connection like that at all?
Thanks for the helpThe most straightforward method would be to use rmi since both are running java. that is the least amount of work on your part in terms of managing connections and data marshalling. any of the other solutions add more burdens in one or both of these areas.
-
Configure internet connection - how to use compute...
Hi All,
Just received a new Nokia phone with GPS and installed OVI suite.
I tried to figure out how to use my computer inter setting to get content for my phone (maps etc..).
The OVI suite doesn't detect my internet connection used on my computer but always tries to connect using my phone.
There exists the manual option but I don't know which setting to fill in: "access point", "user name" and password.
These seems like a very simple thing, but I didn't figure it out.
On my computer I have a LAN connection and wireless connection. Don't know why OVI suite doesn't detect these automatically.
Thanks for any suggestions.
Bart
ps: I already learned from my internet searches that OVI suite is no fun to use.For any content other than Maps.. Download it on to your PC.. Then connect the phone to install it... For Maps... connect your phone to PC using the USB cable (PC Suite Mode).. Launch OVI Suite and go to Maps in its Menu. After some time the Phone will set up and when the OVI Suite connects to the Maps server you will see the list of countries.. Select the Maps you want and follow instruction on the screen.. It will be downloaded and installed on the phone in due time. It will not use the Phone internet but the PC's internet connection...
BTW which phone do you have ?
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
How to use i for if condition in a for i in loop?
Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features. -
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
Hi Experts, I have the follow delivery:
Item Material Deliv.Qty Un
10 739911 2 PQT
And I want to obtain this:
Item Material Deliv.Qty Un Batch
10 739911 0 PQT
900001 739911 1 PQT ZZ00060
900002 739911 1 PQT ZZ00061
But, after using the Bapi I obtained this:
Item Material Deliv.Qty Un Batch
10 739911 1,372 PQT
900001 739911 0,314 PQT ZZ00060
900002 739911 0,314 PQT ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item Deliv.Qty
10 0
900001 1
900002 1
But I obtained:
Item Deliv.Qty
10 1,372
900001 0,314
900002 0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGEHey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = header_data
header_control = header_control
delivery = delivery
* TECHN_CONTROL = TECHN_CONTROL
TABLES
* HEADER_PARTNER = HEADER_PARTNER
* HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
* HEADER_DEADLINES = HEADER_DEADLINES
item_data = item_data
item_control = item_control
* ITEM_SERIAL_NO = ITEM_SERIAL_NO
* EXTENSION1 = EXTENSION1
* EXTENSION2 = EXTENSION2
return = return
* TOKENREFERENCE = TOKENREFERENCE
* HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
* HANDLING_UNIT_ITEM = HANDLING_UNIT_ITEM
* PARTIAL_GR_OBJECTS = PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
break cgavin.
*& Form CREATE_BATCH
* text
* <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
DATA: ls_bncom TYPE bncom.
ls_bncom-matnr = ls_item_data-material.
ls_bncom-werks = 'C333'.
ls_bncom-lgort = '3000'.
SELECT SINGLE mtart
FROM mara
INTO ls_bncom-mtart
WHERE matnr = ls_bncom-matnr.
CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
EXPORTING
matnr = ls_bncom-matnr
werks = ls_bncom-werks
check_batch = 'X'
check_material = ''
message_when_auto = ' '
x_bncom = ls_bncom
lock_batch = ' '
IMPORTING
new_charg = p_ls_item_data_batch
EXCEPTIONS
no_material = 1
no_plant = 2
material_not_found = 3
plant_not_found = 4
no_batch_handling = 5
batch_exist = 6
no_number = 7
illegal_batch_number = 8
interval_not_found = 9
object_not_found = 10
interval_overflow = 11
error_automatic_batch_number = 12
cancelled = 13
automatic_batch_num_not_active = 14
OTHERS = 15.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDFORM. " CREATE_BATCH -
HT1414 how to use itune for iphone activation
how to use itune for iphone activation
Get the latest version of iTunes, your Apple ID and just connect the iPhone to your computer and iTunes will guide you through activation.
-
How to Use 'uid' for AD Users Without Domain Name For User Log in OAM
How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein -
How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(
The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest. -
Install Sun ONE Directory Server 5,2 & how to use it for authenticate user
Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms". -
How to use parathesis for OR and AND OPERATOR...
oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331I assume you're looking for something like this?
select count(balance) from balanace_tb
where ( kk_code in(111,112,113)
or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums? -
Need documents for how to use OAM for APPS DBAs
Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advanceHi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk -
How to use offset for select-option parameter ?
Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satishBelow code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_bupla. -
What is required in order to use ALEAUDIT for Idocs?
Hi Friends
What is required in order to use ALEAUDIT for Idocs?
Regards
SamHi Samuel,
Check out this blog..
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Hope this will help.
Let us know if you need more details.
Nilesh -
How to use stysheet for Swing components?
Hi,
Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnxthank you for your reply,
I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
I'm just not sure how to use it.
Maybe you are looking for
-
Issues with wifi connection after upgrade 10.8.5.
After the upgrade, wifi empty triangle. No way to activiate the wifi. Need to reboot 3 times (just reboot, any other action) to finally have the wifi activated and the connection working. Known issue in this version? Fix planned? Thanks.
-
My Mail icon wont open when i click it
At first it would let me recive my emails now it recives it just wont open. Help please
-
Help plz: Photoshop CS4 Extended & undo feature
It's been weird i used to have PS CS3 Extended with no such problems.. but ever since i upgraded to PS CS4, when i'm working on a file and try to undo, the screen doesn't seem to refresh, meaning that after undoing (even though the history panel refl
-
My internal microphone stopped working on my imac?
My internal microphone stopped working on my imac? I only noticed when I tried to use Skype. It was fine till a recent change to hard drive after a mechanical failure and a clean reinstall. I have USB headset and it works fine, in and out. Any answer
-
How to select multiple row of table using check box?
hi, i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view... my problem is if i select only one row ,