What is wrong with this (timed loop error)?

I can't figure out why the timed loop is not starting and I receive an error -805 message. Any idea?
Thanks,
Ben64

Hi Ben64,
There's no obvious problem.
I tried the same and it works perfect.
So there must be a problem under the cover.
I have 2 suggestions.
1) There is a problem with your wiring -> the Error wire is not connected to the loops error out -> close timing source is executed before the loop is executed (Are you sure the loop doesn't even start ?)
2) Labview often uses Names to identify items (queues, images, semaphores,..... timing sources(?) )
I tried to open and close another timing source with the same name.
Et voila : I'm able to get exactly the error code you mentioned.
Is it possible you use the same name for a second timing source and this one is closed prior to executing the timed loop you've got problems with ?
Best regards,
Balze
Attachments:
timed_loop_2010.vi ‏37 KB

Similar Messages

What's wrong with this while loop?

Hi, folks. for the code fragment blow, resultSetArray holds two objects of type ResultSet. From those println statement, i can see the whole while loop(the most outter one) process goes alrite the first time right from begining to the end. However, when variable j increases from 0 to 1, the code stops executing at the the line while(rs.next). I just couldnt figure out what causes the problem while i've been fighting with it for several hours. Could someone plz throw me some lights? With your help, i could possibly go to bed before sun rises...
        while(j<resultSetArray.length)
          //for(int j=0; j<resultSetArray.length; j++)
System.out.println("show me j is called twice " + j);
               ResultSet rs = resultSetArray[j];
System.out.println("the converting rs object is called twice and it is not null " + rs);
              int numWantedColumns = wantedColumnNames.size();
              //if it's about go or single trip
              if(j==0 && rs != null)
                  go = new Element("Go");
                   //go.setText("go");
                   //result.addContent(go);
              //if it's about return trip
              else if(j==1 && rs != null)
                  back = new Element("Back");
                   //back.setText("back");
                   //result.addContent(back);
              if(rs!= null)
System.out.println("this hell is called twice coz it's not null");
               while(rs.next())
System.out.println("what about here?");
                    Element flightInfo = new Element("FlightInfo");
     System.out.println("while rs.next() is called");
                    for (int i = 0; i < numWantedColumns; i++)
                       String columnName   = (String)wantedColumnNames.get(i);
     System.out.println("column name is " + columnName);
                       String value = rs.getString(columnName);
      System.out.println("column value is " + value);
                       flightInfo.addContent(new Element(columnName).setText(value));
                    if(j==0)
                       go.addContent(flightInfo);
                    else if(j==1)
                         back.addContent(flightInfo);
               else if(rs == null)
                    break;
               j++;
         }

i've got the problem sort out, eventually. there was actually nothing wrong with the while loop. it was caused by a typo in databse, instead of having Brisbane, i typed Bisbane. The single letter r cost me more than 6 hours to figure it out. it was such a painful feeling while i realized i made a such stupid mistake.
by the way, as jnw777 mentioned, output rs.next() info instead of the test line. i did try it, however i didnt realize even System.out.println(rs.next()) would cause the cursor move down one row from its current position. so, plus the original while(rs.next()) statement, it was moving the cursor two rows down at a time! And i just couldnt think of this caused me the fact i was only getting the even number row of the ResultSet while i was sniffing the bug from a class with 700+ lines of code. I was so excited and just couldnt stop yelling at the moment i got over it! That was a damn execiting moment...
now, i am wondering if anyone in this wonderland would like to share his/her stories.

What is wrong with this for loop equation?

The purpose of the loop is to find what level you are, based on the exp you have. My formula is similar to the one found here, with a few modifications (more exp needed at first, less needed later)
[http://upload.wikimedia.org/wikipedia/commons/0/02/RS_skill_Formula.jpg]
The results should show that at 0 to 93 exp you are lvl 1, 94 to 191 is lvl 2, 192 to 297 is level 3, .... and 41402+ is lvl 50. (give or take 1 or 2 exp, for rounding)
public class ExpTest
     public static int getLvl(int exp)
          double EXP = 0;
          int Lvl = 0, i;
          for(i = 1; i <= 50; i++)
               EXP = ((i + 50)/3 + (70 * (2 ^ (i / 9))));
               if (EXP > exp) break;
          Lvl = i - 1;
          if (Lvl > 50) Lvl = 50;
          return(Lvl);
     public static void main(String[] args)
          int exp = 95, lvl;
          lvl = getLvl(exp);
          System.out.println(lvl);
}

Edited loop, it still doesn't work correctly:
for(i = 1; i <= 50; i++)
     EXP = ((i + 50) / 3.0 + (70 * (Math.pow(2,(i / 9.0)))));
     if (EXP > exp) break;
}

What is wrong with this code? on(release) gotoAndPlay("2")'{'

Please could someone tell me what is wrong with this code - on(release)
gotoAndPlay("2")'{'
this is the error that comes up and i have tried changing it but it is not working
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
     gotoAndPlay("2")'{'
Total ActionScript Errors: 1 Reported Errors: 1
Thanks

If you have a frame labelled "2" then it should be:
on (release) {
    this._parent.gotoAndPlay("2");
or other wise just the following to go to frame 2:
on (release) {
     this._parent.gotoAndPlay(2);
You just had a missing curly bracket...

I can't figure out what's wrong with this code

First i want this program to allow me to enter a number with the EasyReader class and depending on the number entered it will show that specific line of this peom:
One two buckle your shoe
Three four shut the door
Five six pick up sticks
Seven eight lay them straight
Nine ten this is the end.
The error message i got was an illegal start of expression. I can't figure out why it is giving me this error because i have if (n = 1) || (n = 2) statements. My code is:
public class PoemSeventeen
public static void main(String[] args)
EasyReader console = new EasyReader();
System.out.println("Enter a number for the poem (0 to quit): ");
int n = console.readInt();
if (n = 1) || (n = 2)
System.out.println("One, two, buckle your shoe");
else if (n = 3) || (n = 4)
System.out.println("Three, four, shut the door");
else if (n = 5) || (n = 6)
System.out.println("Five, six, pick up sticks");
else if (n = 7) || (n = 8)
System.out.println("Seven, eight, lay them straight");
else if (n = 9) || (n = 10)
System.out.println("Nine, ten, this is the end");
else if (n = 0)
System.out.println("You may exit now");
else
System.out.println("Put in a number between 0 and 10");
I messed around with a few other thing because i had some weird errors before but now i have narrowed it down to just this 1 error.
The EasyReader class code:
// package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* <i>Java Methods: An Introduction to Object-Oriented Programming</i>
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* <i>Java Methods AB: Data Structures</i>
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
Can anybody please tell me what's wrong with this code? Thanks

String[] message = {
    "One, two, buckle your shoe",
    "One, two, buckle your shoe",
    "Three, four, shut the door",
    "Three, four, shut the door",
    "Five, six, pick up sticks",
    "Five, six, pick up sticks",
    "Seven, eight, lay them straight",
    "Seven, eight, lay them straight",
    "Nine, ten, this is the end",
    "Nine, ten, this is the end"
if(n>0)
    System.out.println(message[n]);
else
    System.exit(0);

What's wrong with this function

What's wrong with this Function(PL/SQL) in this formaula column definition in Reports 6i
function currdateFormula return Date is
curr_date date;
begin
select to_char(sysdate, 'DD-MM-YYYY') into curr_date from dual;
return(curr_date);
end;
I get the following error in compiling
REP-1401. 'currdateformula'.Fatal PL/SQL error occured. ORA-01843 not a valid month.
The SQL select to_char(sysdate, 'DD-MM-YYYY') from dual; worked well in SQL Plus prompt.
I got a clean compile when i use just sysdate in the function (see below).
function currdateFormula return Date is
curr_date date;
begin
select sysdate into curr_date from dual;
return(curr_date);
end;
Appreciate your help
Raja Lakshmi

hello,
what you are trying to do :
fetch the current date and return it as the result of the formula-column.
what you are actually doing :
fetch the current date, convert it to text, assign this text to a date-variable which causes an implicit type-conversion.
in your case you create a date-string with the format dd-mm-yyyy. the implicit conversion then tries to convert this string back to date using the NLS settings of your session. depending on your NLS_LANG and NLS_DATE_FORMAT this might work, if your session-date-format is dd-mm-yyyy which obviously it is NOT as you get the error.
what you should do :
select sysdate into curr_date from dual;
this fetches the sysdate and stores it in your date-variable. there is no type conversion needed what so ever.
regards,
the oracle reports team

What's wrong with this SQL?

what's wrong with this SQL?
Posted: Jan 16, 2007 9:35 AM Reply
Hi, everyone:
when I insert into table, i use the fellowing SQL:
INSERT INTO xhealthcall_script_data
(XHC_CALL_ENDED, XHC_SWITCH_PORT, XHC_SCRIPT_ID, XHC_FAX_SPECIFIED)
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N'
FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION
SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
I always got an error like;
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT,
ERROR at line 3:
ORA-00936: missing expression
but I can't find anything wrong, who can tell me why?
thank you so much in advance
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:38 AM in response to: jerrygreat Reply
For starters, an insert select does not have a values clause.
HTH -- Mark D Powell --
PP
Posts: 41
From: q
Registered: 8/10/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:48 AM in response to: mpowel01 Reply
Even I see "missing VALUES" as the only error
Eric H
Posts: 2,822
Registered: 10/15/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:54 AM in response to: jerrygreat Reply
...and why are you doing a UNION on the exact same two queries?
(SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:55 AM in response to: mpowel01 Reply
Hi,
thank you for your answer, but the problem is, if I deleted "values" as you pointed out, and then execute it again, I got error like "ERROR at line 3:
ORA-03113: end-of-file on communication channel", and I was then disconnected with server, I have to relogin SQLplus, and do everything from beganing.
so what 's wrong caused disconnection, I can't find any triggers related. it is so wired?
I wonder if anyone can help me about this.
thank you very much
jerry
yingkuan
Posts: 1,801
From: San Jose, CA
Registered: 10/8/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:59 AM in response to: jerrygreat Reply
Dup Post
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:00 AM in response to: Eric H Reply
Hi,
acturlly what I do is debugging a previous developer's scipt for data loading, this script was called by Cron work, but it never can be successfully executed.
I think he use union for eliminating duplications of rows, I just guess.
thank you
jerry
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:03 AM in response to: yingkuan Reply
Scratch the VALUES keyword then make sure that the select list matches the column list in number and type.
1 insert into marktest
2 (fld1, fld2, fld3, fld4, fld5)
3* select * from marktest
UT1 > /
16 rows created.
HTH -- Mark D Powell --
Jagan
Posts: 41
From: Hyderabad
Registered: 7/21/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:07 AM in response to: jerrygreat Reply
try this - just paste the code and give me the error- i mean past the entire error as it is if error occurs
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
Regards
Jagan
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 11:31 AM in response to: Jagan Reply
Hi, Jagan:
thank you very much for your answer.
but when I execute it, I still can get error like:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
so wired, do you have any ideas?
thank you very much

And this one,
Aother question about SQL?
I thought I already told him to deal with
ORA-03113: end-of-file on communication channel
problem first.
There's nothing wrong (syntax wise) with the query. (of course when no "value" in the insert)

What's wrong with this content type definition?

Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
weird) 2) custom order. Where is it getting that Member field from?
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
Name="Folder_OrderColumn"
Group="Custom"
Description="Folder with order column"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
</FieldRefs>
</ContentType>
</Elements>

Hi,
According to your post, my understanding is that you had an issue about the custom content type with custom column.
I don’t think there is any issue in the content type definition, and it also worked well in my environment.
Did you have the Member field in the project?
I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
By doing this, it will be easier to find out the root cause of this error.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

What's wrong with this code (in recursion there may be a problem )

// ELEMENTS OF TWO VECTORS ARE COMPARED HERE
// CHECK WHAT IS WRONG WITH THIS PGM
// there may be a problem in recursion
import java.util.*;
class Test
Vector phy,db;
public static void main(String adf[])
     Vector pp1=new Vector();
     Vector dp1=new Vector();
     //adding elements to the vector
     pp1.add("1");
     pp1.add("a");
     pp1.add("b");
     pp1.add("h");
     pp1.add("c");
     dp1.add("q");
     dp1.add("c");
     dp1.add("h");
     dp1.add("w");
     dp1.add("t");
     printVector(dp1);
     printVector(pp1);
     check2Vectors(pp1,dp1);
public static void printVector(Vector v1)
     System.out.println("Vector size "+v1.size());
     for(int i=0;i<v1.size();i++)
          System.out.println(v1.get(i).toString());
public static void check2Vectors(Vector p,Vector d)
     System.out.println("p.size() "+p.size()+" d.size() "+d.size());
     printVector(p);
     printVector(d);
     for(int i=0;i<p.size();i++)
               for(int j=0;j<d.size();j++)
                    System.out.println(" i= "+i+" j= "+j);
                    Object s1=p.elementAt(i);
                    Object s2=d.elementAt(j);
          System.out.println("Checking "+s1+" and "+s2);
                    if(s1.equals(s2))
System.out.println("Equal and Removing "+s1+" and "+s2);
                         p.remove(i);
                         d.remove(j);
                         printVector(p);
                         printVector(d);
                    check2Vectors(p,d);
               }//inner for
          }//outer for
if(p.size()==0||d.size()==0)
System.out.println("Vector checking finished and both match");
else
System.out.println("Vector checking finished and both do not match");
}//method
}

hi,
but the upper limit is changing everytime you call the function recursively
so there should not be any problem(i suppose)
my intension is to get the unmatched elements of the two vectors
suggest me changes and thanks in advancce
ashok
The problems comes from the fact that you remove
elements for a Vector while iterating in a loop where
the upper limit as been set to the initial size of the
Vector.
You should use so while loops with flexible stop
conditions that would work when the size of the Vector
changes.
Finally: why don't you use Vector.equals() ?

Can anybody see what is wrong with this SQL statement?

Hey guys, just a quick question. Can anybody tell me what is wrong with this line of SQL? I keep getting a syntax error message. I've been trying for ages and I can't see any problem at all!"
{code}prepStat = connection.prepareStatement("INSERT INTO WeatherHistory (Date, Location, Overview, Temperature, WindDirection, WindSpeed, Pressure) VALUES ('"+date+"','"+location+"','"+temp+"','"+windDir+"','"+windSpd+"','"+pressure+"')");{code}
All the field names and variables definitely exist so I can't see what the problem is!

DHD wrote:
Thanks for the replies.
I've matched the correct number of column names and variables, but still no luck.
And how exactly am I misusing Prepared Statements here?As noted above, not according to the code you posted. I didn't just pluck something out of my @ss and throw it out there. There was a reason behind what I said. And, if you mean you changed it, and you still got an exception, then post that exception (completely), and your new code, which is, hopefully, using PreparedStatement, (properly).

Can someone tell me what's wrong with this LOV query please?

This query works fine..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = 'ADAM'
But this one..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = apex_application.g_user
Gives the following error.
1 error has occurred
* LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Thanks very much,
-Adam vonNieda

Ya know, I still don't know what's wrong with this.
declare
l_val varchar2(100) := nvl(apex_application.g_user,'ADAM');
begin
return 'select filter_name display_value, filter_id return_value
from otmgui_filter where username = '''|| l_val || '''';
end;
Gets the same error as above. All I'm trying to do is create a dropdown LOV which selects based on the apex_application.g_user.
What am I missing here?
Thanks,
-Adam

TS1372 does anybody know what is wrong with the ipod when error 1437 is reported during the restore mode?

does anybody know what is wrong with the ipod when error 1437 is reportedduring the restore cycle?

Double check the connections on each end to make sure they are nice and snug. If possible, plug the Nano into another existing USB 2.0 port.
Also, with the iPod still connected, try resetting it. To do this, press and hold both the Select (Center) and Menu buttons (or the Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear.
Then try restoring the iPod again.
B-rock

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!

What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
This is actually "specific" to this Photoshop Forum.
I typically get responses back from other Adobe forum promptly.
Chime in.

The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING! Please name any other big company where you get to interact with the engineers AT ALL. I can't. But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
Your comments are more along the line of "I pay a huge amount, for that I expect better support". These are very valid comments. But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL. In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
At the higher level, Adobe may simply not be spending enough on support for literally millions of users. Is is greed or smart business to try to minimize support cost? That's up for individuals to decide.
I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
-Noel

What is wrong with this (timed loop error)?

Similar Messages

Maybe you are looking for