What kind of screen protector should I use for my iPhone 6? Should I use one?

I'm looking for a screen protector for my brand new baby. To my dismay, it's hard to find one that "fits" because of the curved edges. I have ocd, not to mention that what isn't covered by a screen protector are usually crucial areas. Can anyone recommend anything? I always use a screen protector because I'm super paranoid. I throw my phone in my purse a lot where I feel like it will come in contact with one too many things that can scratch it. I don't have a ton of money to spend, sorry I'm a college student. Also, I don't like glass protectors. If I need one I'm looking for a film. Thanks in advance from a new iPhone 6 parent!

I have an iPhone 6 Plus but I thought I would try to help you out!! I use the Zagg Glass Invisible shield and I must say at first I loved it! It feels smooth and accepts input super well! It doesn't, however, go all the way to the edge of the screen which is weird, I agree. I've only had it for about a month now and its already chipped on the top edge by the speaker and its super annoying!! They will replace it for free but I'm not sure that I want another one that chipped so easily.
I've heard great things about the iloome screen mate and it goes all the way to the edge of the screen and covers the curved part. I know you said you don't like glass protectors but those are the best and if you get a good one you pretty much only need to replace it once a year so you pay a bit more up front but it lasts a lot better than just film ones. Hope that helps!!!!!

Similar Messages

What kind of CD-R should I use?

I've recently had problems burning CD's from iTunes . . .the CD's seem to burn correctly, but when I insert them into one of several DVD players, they skip, pop and do other weird things. (Burning DVDs from iDVD runs smoothly.) I have the original drive that came with my G5 as follows: PIONEER DVD-RW DVR-117D.
Reading through the forums, it seems that the type of media used is a common cause of problems like this. I don't know what kind of CD's I was using before, but the spindle I have now contains Memorex CD's with a 52X max speed, and hold 700 MB.
I think my drive has a maximum speed of 16X, so I tested burning at 16X and then 4X . . .I got the same results.
If I'm reading the threads correctly, my drive would work best with 650 MB disks with a max burn speed of 16X. As far as I can tell from Goggling however, that kind of disk is no longer exists.
So what specs should I look for that will be most compatible with my drive?
Thanks!
Bryce

Thanks! It looks like these drives are only $26 . . .I'll bet I've spent at least half that much in wasted CD's over the past few days.
Perhaps this next question should go over to the Final Cut Pro discussions, but I'll start here . . .as long as I'm considering replacing the drive, I'm wondering if I should upgrade to something better/faster.
I remember there being an issue some years ago that software like iDVD and DVD Studio Pro would only write to certain Apple sanctioned DVD burners.
For me, it's less about the money and more about have equipment that works properly . . .and faster (time is money).
Any advice about upgrading?

What kind of blank discs should I use on my macbook?

What kind of blank discs should I use on my macbook?

cd-r - for burning audio and MP3 cd's for playback on stereos via iTunes and storing under 700MB in files.
dvd-r - for burning data dvd's and movies to 4.5GB
dvd-r ds - dual sided for 9GB
dvd-r dl - for dual layer on one side about 9GB total, good for making copies of OS X install disks
dvd-r dl ds - dual layer double sided for about 18GB total
then there is blueray dvd's but that requires a external burner and special disks for even larger amounts of data.
If you see "+" instead of "-" like cd+r, it's a differnet format on the disk, but most all new modern machines can read/burn either now.
Older machines might only be "-" or "+" with "-" being the most commonly used.

HT3500 i just want to connect with hp printer what kind of wire i should use

i just want to connect with hp printer what kind of wire i should use

Is your HP printer wireless? If so, no wire.
If it isn't plug it in using the cable it came with. Simple.

What kind of version checking should be done for applications using SQLDBC

Hi,
This query is regarding the kind of version checking that an application should do.
Currently I am building my application in MaxDB version of 7.6.05.09, which is the community edition available on the sdn download site currently, this will change to the enterprise edition once we have finalized everything in terms of code and packging etc....
Now when the application is shipped to customer site, what kind of version checking should the application do to ensure that the version of library/kernel/client/sdk it has been built with is consistent with the one that is installed at the customer site.
From what i see SQLDBC exposes the following method for getting version related information.
char * SQLDBC_Environment_getLibraryVersion(SQLDBC_Environment* hdl);
char *getSDKVersion();
SQLDBC_Int4 SQLDBC_Statement_getKernelVersion(SQLDBC_Statement* hdl); (Note: Wondering why should a handle to SQLDBC_Statement be needed to find the Kernel version)
Just to give you little more hint of what i am talking about, for MySQL database we use the functions
mysql_get_client_version and mysql_get_server_version and check that the values returned by these functions are less than the value which was used at build time.
Regards
Raja

Hello Raja
From the documentation:
const char* SQLDBC::SQLDBC_Environment::getLibraryVersion ()
Returns the version of used SQLDBC runtime.
This is the version of the used SQLDBC library. The version of the loaded
runtime may differ from the version inidacted in the used header. It is our
aim that newer versions of the runtime will run with old applications without
the need to be re-compiling.
Therefore, for compatibility checks, use getLibraryVersion.
getKernelVersion is also available from the connection:
SQLDBC_Connection::getKernelVersion()
Regards Thomas

What kind of external drive should I get for my macbook pro for backups etc

what kind of external drive should I get for my macbook pro for backups and storage

Hi, i have a Mercury Elite-AL Pro from OWC, www.otherworldcomputung.com
this is the one;
http://eshop.macsales.com/item/Other%20World%20Computing/MEAQ7S1TB32M/
have had this for over two years, moved around a lot with the drive, ( to date ) no problems, they have good after sales support; give them a call if you need info.
There are a lot of drives out there as others here will let you know, there are good NAME drives but they also fail, POPULAR drives also fail, select the one you are happy with for your system and how you plan to use.
i suggest if $ is not a problem get a big drive you will find someting to put on it and is better.
hope this helps.

I need in Formula Node to assign to the variable value 4000000000!!! What kind of variable it should be???

i've just tryed to write unsigned in32, but it does not understand 'unsogned'... But i need variable to be unsigned, because the max value = 4000000000... So, how can i solve this probleme???

Hi,
I don't see exactly what you're trying to do here.
Where do you want to assign the variable 4000000000 to? If you want it as an
input, just use a dbl, with only zeros behind the coma.
Note that an integer is a number without any decimals. An integer in LabVIEW
is this, but with an extra limitation that it can only be 32 bits... So a
dbl can be an integer.
If the input dbl is not an integer, use round, round to -inf or round to
+inf to make it one. This can also be done if the output needs to be an
integer.Inside the formula node floor(x), int(x), intrz(x) or ceil(x) can be
used to make integers.
I hope this is what you mean... I can't see any problems doing this.
Regards,
Wiebe.
"DrON" wrote in message
news:506500000008000000E
[email protected]..
> I need in Formula Node to assign to the variable value 4000000000!!!
> What kind of variable it should be???
>
> i've just tryed to write unsigned in32, but it does not understand
> 'unsogned'... But i need variable to be unsigned, because the max
> value = 4000000000... So, how can i solve this probleme???

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

What kind of VGA adaptor do I use with my ibook G4?, What kind of VGA adaptor do I use with my ibook G4?

I bought a VGA adaptor wire for my Mac ibook G4, but it doesn't fit my port. What kind of VGA adaptor do I use?

Hi, and welcome to Apple Support Community.
You need the Apple VGA Display Adapter. This is for video-out to an external display. It will not get you the audio.
If you want video out to a TV, it will require a different adapter.
https://discussions.apple.com/docs/DOC-1908

What kind of video formats can i use to import into imovie?

what kind of video formats can i use to import into imovie?

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

What kind of glass or plastic is used for camera lens

What kind of glass or plsastic is used for camera lens protection?
Solved!
Go to Solution.

Its glass but I'll see if I can find more info on it
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?

http://www.apple.com/downloads/macosx/games/

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

What kind of range extender can I use with airport express

WHat kind of range extender can I use with an airport express?

WHat kind of range extender can I use with an airport express?
Use any router that you want if you will be connecting the extender/router back to the AirPort Express using a permanent, wired Ethernet cable connection.
If you are planning to use a wireless connection to extend the range of the network.....then another AirPort Express, AirPort Extreme or Time Capsule will be required.

What shows on screen at startup when using find my mac if owner locks it?

what shows on screen at startup when using find my mac if owner locks it?

A gray screen where they will have to enter a six digit passcode to unlock the Mac. If the Mac were being used and the remote lock sent, the computer would re-boot to this screen.

What kind of screen protector should I use for my iPhone 6? Should I use one?

Similar Messages

Maybe you are looking for