What patches are needed for OCS R1 singlebox Windows installation

Hi there,
I'm trying to install OCS R1 on Windows 2000 server and I wanted to know if I need any patch to perform the installation.
I'm following the Note 221812.1 and according to it I have created email accounts as mailadmin (System Administrator) and now I should apply the patch 2606325, but I don't know if this is required for Windows. It probably is, because I skip this step and test the mail system by sending mails between the accounts already created and I get a message which says that: an error has occurred at attempting to send the message.
I don't know if this is due to the fact that I haven't applied the patch or due to something else...
I would appreciate any help.
Best regards,
Jorge

I tried to check out that note of yours, i think it no longer exists, the same goes for the patch number.
Anyway from my linux install as far as the installation goes, there was no need for patches ocs installs without them. However if you want to use something like workflow for files, then you need a few patches.
Firstly you need to patch which is applied after your workflow installation - i cannot rememeber its number, but you should find it in eithr the files admin guide or files release notes for 9.0.3.
In addition to that, when you install workflow, you also need to add a few languages, which if you do not with result in your workflow/files integration failing.

Similar Messages

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

How to find what archivelogs are needed for recovery

From Hemants sir's blog:
http://hemantoracledba.blogspot.com/2010/03/misinterpreting-restore-database.html
"You can query V$ARCHIVED_LOG for FIRST_CHANGE# and FIRST_TIME besides SEQUENCE#. That way, you can match SCN (FIRST_CHANGE#), Time and Sequence to determine which ArchiveLogs are need. The RMAN LIST BACKUP command shows you the Checkpoint SCN for all datafiles in a backup, so you need ArchiveLogs from the point of the earliest Checkpoint SCN in that backup set."
How can i find the earliest checkpoint SCN from the backupsets?
Any queries to find the earliest SCN in backupset(RC views)?
Edited by: user9097501 on Aug 10, 2010 6:38 AM

If i have to refresh the database from the backup of 9-AUG so the earliest SCN from where recovery would be needed is 60279026593 ?
RMAN> list backup of datafile 1;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
43210 Incr 0 13.25G DISK 03:55:03 25-DEC-2009 15:52
List of Datafiles in backup set 43210
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 46646244284 25-DEC-2009 11:57 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43210
Device Type Elapsed Time Completion Time Compressed Tag
DISK 03:55:03 25-DEC-2009 15:51 YES FORCLONE
List of Backup Pieces for backup set 43210 Copy #1
BP Key Pc# Status Piece Name
51423 1 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_1.bak
51424 2 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_2.bak
51425 3 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_3.bak
51426 4 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_4.bak
51427 5 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_5.bak
51428 6 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_6.bak
51429 7 AVAILABLE /backup/bkup_for_clone_GOCPRD_20091225_44019_7.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43367 Incr 0 15.33G DISK 03:39:25 19-FEB-2010 23:43
List of Datafiles in backup set 43367
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 49260361949 19-FEB-2010 20:03 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43367
Device Type Elapsed Time Completion Time Compressed Tag
DISK 03:39:25 19-FEB-2010 23:42 YES FORCLONE
List of Backup Pieces for backup set 43367 Copy #1
BP Key Pc# Status Piece Name
51819 1 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_1.bak
51820 2 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_2.bak
51821 3 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_3.bak
51822 4 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_4.bak
51823 5 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_5.bak
51824 6 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_6.bak
51825 7 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_7.bak
51826 8 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/na1stg/bkup_for_clone_GOCPRD_20100219_44170_8.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43518 Incr 0 13.70G DISK 04:26:50 03-APR-2010 12:12
List of Datafiles in backup set 43518
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 51275194891 03-APR-2010 07:46 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43518
Device Type Elapsed Time Completion Time Compressed Tag
DISK 04:26:50 03-APR-2010 12:12 YES FORCLONE
List of Backup Pieces for backup set 43518 Copy #1
BP Key Pc# Status Piece Name
52481 1 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_1.bak
52482 2 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_2.bak
52483 3 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_3.bak
52484 4 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_4.bak
52485 5 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_5.bak
52486 6 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_6.bak
52487 7 EXPIRED /dnbusr1/dnbinas/dnbi_clone/backup/GOCPRD/bkup_for_clone_GOCPRD_20100403_44346_7.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43599 Incr 0 16.56G DISK 04:36:51 11-APR-2010 03:35
List of Datafiles in backup set 43599
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 51583056741 10-APR-2010 22:58 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43599
Device Type Elapsed Time Completion Time Compressed Tag
DISK 04:36:51 11-APR-2010 03:35 YES FORCLONE
List of Backup Pieces for backup set 43599 Copy #1
BP Key Pc# Status Piece Name
52841 1 EXPIRED /backup/bkup_for_clone_GOCPRD_20100410_44440_1.bak
52842 2 EXPIRED /backup/bkup_for_clone_GOCPRD_20100410_44440_2.bak
52843 3 EXPIRED /backup/bkup_for_clone_GOCPRD_20100410_44440_3.bak
52844 4 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_4.bak
52845 5 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_5.bak
52846 6 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_6.bak
52847 7 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_7.bak
52848 8 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_8.bak
52849 9 EXPIRED /backup/bkup_for_clone_GOCPRD_20100411_44440_9.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43637 Incr 0 16.37G DISK 05:13:41 18-APR-2010 04:09
Keep: LOGS Until: FOREVER
List of Datafiles in backup set 43637
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 51953576598 17-APR-2010 22:56 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43637
Device Type Elapsed Time Completion Time Compressed Tag
DISK 05:13:41 18-APR-2010 04:09 YES FORCLONE_17APR
List of Backup Pieces for backup set 43637 Copy #1
BP Key Pc# Status Piece Name
53112 1 EXPIRED /backup/bkup_for_clone_GOCPRD_20100417_44486_1.bak
53113 2 EXPIRED /backup/bkup_for_clone_GOCPRD_20100417_44486_2.bak
53114 3 EXPIRED /backup/bkup_for_clone_GOCPRD_20100417_44486_3.bak
53115 4 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_4.bak
53116 5 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_5.bak
53117 6 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_6.bak
53118 7 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_7.bak
53119 8 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_8.bak
53120 9 EXPIRED /backup/bkup_for_clone_GOCPRD_20100418_44486_9.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43773 Incr 0 18.31G DISK 03:45:59 27-JUN-2010 16:23
List of Datafiles in backup set 43773
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 58235899541 27-JUN-2010 12:37 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43773
Device Type Elapsed Time Completion Time Compressed Tag
DISK 03:45:59 27-JUN-2010 16:23 YES FOR_DUP
List of Backup Pieces for backup set 43773 Copy #1
BP Key Pc# Status Piece Name
53784 1 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_1.bak
53785 2 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_2.bak
53786 3 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_3.bak
53787 4 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_4.bak
53788 5 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_5.bak
53789 6 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_6.bak
53790 7 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_7.bak
53791 8 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_8.bak
53792 9 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_9.bak
53793 10 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100627_44623_10.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
43964 Incr 0 10.59G DISK 03:17:50 05-AUG-2010 03:05
List of Datafiles in backup set 43964
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 60108165915 04-AUG-2010 23:47 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 43964
Device Type Elapsed Time Completion Time Compressed Tag
DISK 03:17:50 05-AUG-2010 03:05 YES FOR_DUP
List of Backup Pieces for backup set 43964 Copy #1
BP Key Pc# Status Piece Name
54470 1 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100804_44966_1.bak
54471 2 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100805_44966_2.bak
54472 3 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100805_44966_3.bak
54473 4 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100805_44966_4.bak
54474 5 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100805_44966_5.bak
54475 6 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100805_44966_6.bak
BS Key Type LV Size Device Type Elapsed Time Completion Time
44020 Incr 0 19.75G DISK 04:13:42 09-AUG-2010 03:15
List of Datafiles in backup set 44020
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 60279026593 08-AUG-2010 23:01 +DBDATA/dnbib/datafile/system.455.675750017
Backup Set Copy #1 of backup set 44020
Device Type Elapsed Time Completion Time Compressed Tag
DISK 04:13:42 09-AUG-2010 03:15 YES FOR_DUP
List of Backup Pieces for backup set 44020 Copy #1
BP Key Pc# Status Piece Name
54990 1 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100808_45009_1.bak
54991 2 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100808_45009_2.bak
54992 3 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100808_45009_3.bak
54993 4 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100808_45009_4.bak
54994 5 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_5.bak
54995 6 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_6.bak
54996 7 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_7.bak
54997 8 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_8.bak
54998 9 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_9.bak
54999 10 AVAILABLE /backup/bkup_for_dup_GOCPRD_20100809_45009_10.bak
RMAN>

What authorization are need for T-code se37

Hi,
i create a user with following roles:
SAP_BC_USER_ADMIN
SAP_J2EE_ADMIN
SAP_MT_SYSTEM_TEST
SAP_SLD_ADMINISTRATOR
But when i logon with this user, and run se37, a warning message will show as following:
"You are not authorized to use transaction SE37".
Then, what other roles, not SAP_ALL, do i need to assign to the user for SE37.
Thanks & Best Regards,
Johnney.

hi,
You can check authorization object name from tcode SU53.
Regards
Gagan

What claims are needed for search?

We have a SP 2013 search system where it searches a different sharepoint farm. Before with NTLM, we were able to get those results. After implementing single sign on with Ping Federate, we are unable to get search results from that other
system. We suspected at first that we needed the group memberships to be added to the claims, which we tried. But still nothing. Does anyone know what claims would be needed in this scenario? We currently get primarysid, upn, windowsaccountname, and now Groups.

Hi Scott,
You may check if "Windows authentication" has enabled for your web application for this issue, here are some useful posts about this topic, you can take a look.
"If you are using claims-based authentication, make sure that Windows authentication is enabled on any Web applications to be crawled."
http://sharepoint.stackexchange.com/questions/59635/crawler-authentication-in-sharepoint-2013-for-sts-based-external-website
https://technet.microsoft.com/en-us/library/jj219577.aspx?f=255&MSPPError=-2147217396#PlanCrawlerAuth
http://blogs.technet.com/b/saantil/archive/2013/06/03/sharepoint-2013-in-claims-authentication-through-pingfederate-6-6-crawl-issue.aspx
For a better assistance for PingFederate product, you may want to post on the web site below,
https://ping.force.com/Support/PingIdentityAnswersHome
http://sharepoint.stackexchange.com/questions/53680/windows-authentication-and-trusted-identity-provider-user-mapping-to-a-single
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

What rights are needed for remote control

I have a user that I want to allow remote control rights for a group of
classroom PC's. What rights do I need to give her and where do I apply
them? I have read TIDS that tell me I have to give rights at each
workstation object which I find hard to believe as its so time consuming!
Thanks in advance
Hazel

> On Thu, 27 Jan 2005 19:38:56 GMT, [email protected] wrote:
>
> > I have read TIDS that tell me I have to give rights at each
> > workstation object which I find hard to believe as its so time
consuming!
>
> depends.. if you have not eDir that's the case..
>
> but take a look at tools zenworks remote operators... which will help
you a
> lot in this case...
> --
>
> Marcus Breiden
I have edirectory and imported workstations etc .. running zen 4.1 .. I
just cant seem to figure out how to give this user rights to remote
control only one classroom.
Hazel
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

What settings are needed for Flip 4 Mac to change frame size?

I just installed Flip 4 Mac Studio Pro so that I can make wmv files in different sizes. It works in 340x240 and 480x360, but freezes up when I choose the preset 384x288. Are there other settings that need to be changed to make this work. I thought this version of Flip would allow me to do most anything.
I'm exporting a short 4 min sequence from FCP using Quicktime conversion.

This will give you the instructions on how to set it up step by step.
http://community.virginmedia.com/t5/Email/Setting-up-access-to-Virgin-Media-NTLW ORLD-email-on-iPhone-or/td-p/883445

What patches are needed to go from 14.0.7116.x to 14.0.7128.x

A team member patched his system using windows update but his revision is dofferent and his version x.7128 does not crash but the rest of the team with the older x.7116 crashes when they try to open up his files.
How to bring them all up to the same revision because running windows updates on all of them is not doing the fix.
Otherwise everything else is just fine on the pc.
ALERT ALERT! ALERT!

Hi,
This is a forum for Visio. Since this issue is related to Windows client, I recommend you post it in Windows client forum.
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro%2Cw8itpro%2Cwindowsvistaitpro%2Cwindowsxpitpro%2Cwindowsintune
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

What files are needed for backup

Hello all,
Our database stopped working because of a mistake and we've lost lots of our control files and configuration files.
On the other hand there are 5 oracle_homes in our system! So we decided to uninstall Oracle and install a clean version and restore our data, tables, triggers, functions and ... to it.
We have many rman level 0 and 1 backups since 2 months ago and the size of each level 0 backup is around 1.8 GB.
But I am new to Oracle, so please let me know which files I need to keep from our current Oracle before uninstalling it and how I can restore backups to the new oracle (probably I will install it in a new drive not in D:/ again and with a new SID maybe). Also please let me know which version I should install? (Desktop Class or Server Class) We have some applications on our own laptops which connect to server and retrieve/insert data from/into oracle database on the server.
Our current database does not mount and open because of the problems I mentioned above.
Our server is: Windows Server 2008
Oracle Version: 11g
The scrips the we used to create rman backups are:
echo database backup, level 1
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup1.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
and
echo database backup, level 0
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup0.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
Thanks

RMAN's BACKUP command supports backing up the following types of files:
Database files, including datafiles, control files, and the server parameter file (SPFILE)
Archived redo logs
Other backups created by RMAN, including such as datafile and control file image copies, and backup sets containing SPFILEs, control files, datafiles and archived logs
Check
http://web.njit.edu/info/limpid/DOC/backup.102/b14192/bkup001.htm

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

What Equipment is Needed for CCNP Security Lab

Hello,
Im Looking to find out what Devices are needed for a ccnp security home lab. I keep hearing that 2 5510's are a must for labbing. The downside Is the Prices avg $800 each on the low end. I also saw some ppl had an ips in their lab. Im looking to find out what is 100% needed. I alredy have a lab in place used for my ccnp r&s.
Thanks

I would also say that two ASAs is a must to practice with them. But in my opinion, 2 5505 SecPlus are enough. What are the differences to the 5510? You configure subinterfaces instead of vlan-interfaces. But that's something you know from R/S. And the failover is only stateless, but failover in general also works. Sof if you find these ASAs for less money, take them. IPS is probably the topic where most CCNP Security students are least familar with. So owning a sensor would also help.
And don't forget that the bigger CCIE-Training vendors have complete labs for rent with all you need for CCNP Sec preparation. That could also save some money.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

What technical components are needed for integration of SAP BI and BO?

Hello,
What technical components are needed for integration of SAP BI and BO?

Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos

Newbie: how to find wich patches are needed?

I have a number or Oracle DB's (previously installed by someone) from 10.1 to 11.1.
I would like to patch some of them if needed, but I don't know how to find patches are needed?
tnx

Hi,
The following methods will help to know what are the patches installed at your ORACLE HOME
1) opatch lsinv -bugs_fixed
This option will give description of installed patches as below, but the opatch version should be higher than
10.2.0.4.5 for version 10.2 ORACLE_HOMEs
$ opatch lsinv -bugs_fixed
8576156 8833280 Tue Feb 09 16:54:18 MST 2010 DATABASE PSU 10.2.0.4.3 (INCLUDES CPUJUL2009)
8833280 8833280 Tue Feb 09 16:54:18 MST 2010 DATABASE PSU 10.2.0.4.4 (INCLUDES CPUOCT2009)
2) select substr(action_time,1,30) action_time,
substr(id,1,10) id,
substr(action,1,10) action,
substr(version,1,8) version,
substr(BUNDLE_SERIES,1,6) bundle,
substr(comments,1,20) comments
from registry$history;
This option will work when post installation has been performed for that patch
thanks,
Krishna

When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

When you open a new browser tab, underneath the box to type in what you are looking for is the recently visited list. I want to disable or delete this list...how do I get rid of this list???

The drop-down list displays items from your History and/or Bookmarks.
You can control what shows (or nothing at all): Options > Privacy, "Location Bar" section. Options are:
*History and Bookmarks
*History
*Bookmarks
*Nothing
See --> https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

What apps are available for ipod touch 1st generation

what apps are available for 1st generation ipod touch

Here's a list of Apps/games I've been able to download & play for 1st gen ipod touch:
1. Dragon Story
2. Dragon Village
3. World War
4. Rollercoaster Buggy
5. GTA: Chinatown Lite
6. iBrowser Free
7. Castle Magic Lite
8. Tappily Ever After
9. TextFree
10. Unblock Me
11. Emer. Radio Free
12. Need For Speed: Hot Pursuit
13. Touch Chords
14. Word Search
15. Ghost Stories
16. Search Bing
17. HTML Viewer
18. Multi-App
19. Namco Portal
20. Fantasy Background
21. Shanghai Lite (Mahjongg)
22. Solitaire
23. Bling
24. Freecell
25. Fairy*
26. City Story
27. *City*
28. Nightclub
29. Hidden Object Free
30. Party In My Dorm
31. Crossworlds: The Flying City
32. Fast-Connect (WiFi)
33. Taptown 2
34. The Hunt
35. Daily Jigsaw
36. Hidden Mysteries: Civil War
37. Slingo Supreme Lite
38. Pocket Bingo
39. Keno Keno Free
40. Live Bingo
41. Scrabble Free
42. Boggle Free
43. Fruited
44. Free Browser
45. Monster City
46. City Zombies
47. Jewel Farm
48. iSpaceship Landing
49. Land Of The Lost: Crystal Adventure
50. Exotic Positions
51. Sex Postions Game
52. iFun Sex
53. Yukon (Solitaire)
54. Canfield (Solitaire)
55. Sex Positions
56. Pickup Lines
57. Yo Momma Ultimate Lite
58. Jokes
There are more.

What patches are needed for OCS R1 singlebox Windows installation

Similar Messages

Maybe you are looking for