What property is used to disable SASL's DIGEST-MD5 domain name check.

I've read somewhere that I can prevent SASL's DIGEST-MD5 (maybe other mechanisms?) from checking that the hostname specified by the client exactly matches the hostname on the server. Apparently this option is useful in networks where DNS is not set up full and/or correctly.
Thanks,
Rowland

Not an expert. Maybe you can read or debug into the exact place when the names are compared. Anyway, Java is open sourced now.

Similar Messages

SASL's DIGEST-MD5 is causing the smtp authentication failure

Hello,
I've asked this question in JavaMail forums [at this link|http://kenai.com/projects/javamail/forums/forum/topics/2944-DIGEST-MD5-sasl-authentication-failing-after-verifying-rspauth] and was forwarded here.
Basically, I'm trying to authenticate to the email server using JavaMail(latest source) via sasl's Digest-MD5.
Problem: Looks like sasl's DigestMD5 implementation (com.sun.security.sasl.digest.DigestMD5Client) is returning a null after a successful authentication in evaluateChallenge(). The SMTPTransport thinks this is wrong and sends a "*" to server and the server responds with "Authentication aborted".
The java doc for SaslClient's evaluateChallenge() says this..
Returns: The possibly null reponse to send to the server. It is null if the challenge accompanied a "SUCCESS" status and the challenge only contains data for the client to update its state and no response needs to be sent to the server. The response is a zero-length byte array if the client is to send a response with no data.
In this case, client do need to send a response with no data. I don't know if Digest-md5 implementation is generic and if it's behavior is correct.
I appreciate any suggestions to solve this problem.
Thanks

Not an expert. Maybe you can read or debug into the exact place when the names are compared. Anyway, Java is open sourced now.

How to use iPhoto web gallery with iWeb & personal domain name

So, another question about iWeb 08:
I've set up my site to use a personal domain name, like www.mypersonaldomain.com. I've configured everything with my DNS settings so that it actually points to my iWeb site, and I'm happy about that.
However, I've imported a few iPhoto '08 web galleries into my site, but when I browse to them by going to www.mypersonaldomain.com and clicking on the link for my gallery, it goes to a URL that actually shows my .mac account, i.e. gallery.mac.com/sockdaddy/gallery1/photo.jpg
Is there any way to have the web galleries that I'm using become a more transparent part of my iWeb site, and use my personal domain?

I've never done this on .Mac but I do use this on my server. I don't see why it wouldn't work.
In iPhoto select your web gallery and in the "file" menu select "export" and then "Web Page".
Select your options and click "Export" to the desktop.
There are now 4 folders and an index.html file.
Change the name of the index file to whatever you want to call the page e.g WebGallery.html
Now go to Finder/Go/iDisk/My iDisk/Web/Sites and open your website folder.
Drag and drop the 4 folders and the html file from your desktop into this.
Create a link to this from your website in the "link" inspector and choose "external page".
The URL for the link will be the same as any other page on your site except WebGallery is substituted for the page name.
If you check the "open link in new window" you won't have to worry about the fact that you don't have a link back to your site from the WebGallery page.

Use only IP-number and skip web domain name?

I have a Mac Mini Server and I am about to order an external firewall device. The firewall will be used with vpn to get access to the server from the internet. Access to the server will only be for my colleages . The server should not be accessible for other people at all (e.g., no public website, etc).
Here comes my newbie question…is it possible to only use my static public IP number to get access to the server through vpn? Do I really need a a web domain name?
Do I really need to get dns involved on the outside?
At the moment I am using my servers Wiki and blog by typing in the IP-number in the browsers address field. It would be fine with with me to continue with that.

is it possible to only use my static public IP number to get access to the server through vpn? Do I really need a a web domain name?
Sure. if you can remember your IP address you can use that anywhere. DNS exists because there are literally millions of IP addresses out there and human brains are better at remembering words (e.g. 'discussions.apple.com') than they are numbers (e.g. '64.212.100.59').
Do I really need to get dns involved on the outside?
Since it's only you and your colleagues, not at all.
At the moment I am using my servers Wiki and blog by typing in the IP-number in the browsers address field. It would be fine with with me to continue with that.
It's also not hard to setup a local DNS for your internal systems - once you're connected to VPN you'd automatically start using the internal DNS server and would be able to use memorable names, but it's entirely your choice.

Use firefox cannot open cpanel of a domain name and cannot see all image of a url when use firefoz to open that url

Use firefox to open one cpanel of a domain name but can open at safari or IE
Use firefox browser to open one url, all the image of this url cannot see but can see at safari or IE?
Vivien Chan
[email protected]

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.com/kb/Images+or+animations+do+not+show
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.com/kb/Error+loading+web+sites

How can I disable the output of the domain name after a getent request?

I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
123.123.123.123 hostname.domainname
How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
Help, please?!

The enrty in Ur DS for name to ip resolution might
have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

What is the use of end routine in bi 7.0

hi friends,
what is the use of end routine in bi 7.0. what scenerio we use end routine.
Thanking u
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine
An end routine is a routine with a table in the target structure format as input and output parameters. You can use an end routine to postprocess data after transformation on a package-by-package basis. For example, you can delete records that are not to be updated, or perform data checks.
If the target of the transformation is a DataStore object, key figures are updated by default with the aggregation behavior Overwrite (MOVE). You have to use a dummy rule to override this.
hope this helps.

Can I use several domain names through mobile me ??

Hi, I have just purchased ilife 09 and would now like to add a couple of additional websites that I have purchased alongside my main one www.empressrockband.co.uk
I am fairly sure I should be able to do this but I just can't seem to be able to find anything to show me what to do. Everything I look at seems to show how to add the first domain name but not subsequent ones.
Can anyone please assist ??
Many thanks, Tony

No, this is not what they are saying.
What they are telling you to do is use the CNAME forwarding method for all of your domains, which will not work.
What you need to do is is log in as they have told you to do and then alter the A settings to create a new CNAME and then forward the www and @ (which they have said) - this is your domain name, which is the alias and forward it to web.me.com - this is forwarded to the Apple server which will point specifically to your site as it is published to MobileMe.
I take it that you only have one MobileMe account? If you do, then you can only re-direct one domain name using the CNAME/personal domain name option ONCE for every MobileMe account. If you have more than one domain name that you want to re-direct to a MobileMe published site, then you need to use either masked or unmasked web forwarding for the others.
So ensure that the site that you want linked to your first domain name is published first and then link it using the CNAME method, as your domain registrar has explained to you - you also need to ensure that this same domain name is entered into your MobileMe account too and this will then forward to your first site.
For your other sites however, you cannot use CNAME, but you need to go to web forwarding and forward your other two domain names or however many others you have to web.me.com/username/sitename and this is how you forward your domain name specifically to your site, by entering the forward as web.me.com/username/sitename. With the CNAME it is only ever web.me.com because your domain name will then link to your first published site - the web forwarding is specific to the site if you have already used the CNAME.
If you do not know where to find the ordinary web forwarding section of your domain registrar, e-mail them and ask them or ask them to do it for you by telling them which domain names you want linked to which sites and asking them to enable the masking or not and then get them to forward to web.me.com/username/sitename.
Your only other option, if you want to use CNAME forwarding for all of your domain names is to upgrade your one MobileMe account to a Family Pack, where you get on main account and 4 sub-accounts, all of which you can use CNAME forwarding for.
Remember - you can only use CNAME forwarding ONCE for every MobileMe account - for other domains you then need to use either masked or unmasked web forwarding.

I have a domain name with go-daddy can i use iweb to create my page?

I'm trying to help a friend set-up a website. he has a domain name with go-daddy but hasnt set-up the web page at all can i use iweb and upload it to the domain name he already has bought? I'm a first time iweb user please help!!

Your friend needs both a domain name and a web hosting account in order to get his website online. If he has both with GoDaddy.com then yes, you can create and upload the site.
If he has purchased only a domain name he'll need to get a hosting service.
OT

Using specific wan port for a particular domain/IP

I have RV042 router which is connected to the internet by both the wan ports and I want to use it as a load balancer so that both of my internet connections can be utilized evenly. But now I have an issue in this scenario as my remote application gets logout whenever the communicating IP address changes.
Now here is my question.
Is there any way out so that I can specify the wan port used for a particular public IP address/domain name?

Hi Kinshuk, thank you for using our forum, my name is Luis I am part of the Small business Support community. I read your post and I have an article from our knowledge base and called Guide me, you could use to configure a protocol binding in order to specify the WAN port that you want redirect and select the specific traffic.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=622
If you scroll down you will see a section called "Manage Protocol Binding" here you will see instructions to configure that.
If you have any question please let me know.
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.

Language Monitors and Bi-directional Printing: What functionality is lost when disabling? What else uses them?

Server OS: Windows 2008 R2 Standard
Function: Primary Domain Controller and Print Server
Clients: All are running Windows 7 Pro 64-Bit SP1
We're considering disabling the HP Universal Print Driver Language Monitor and in-turn Bi-directional Printing due to potential server spooler instabilities, before we do this the IT Manager wants to be sure:
1. What functionality is lost when disabling Language Monitors and Bi-directional Printing?
2. What else uses Language Monitors and Bi-directional Printing them? In other words what may break?
3. What specifically do Language Monitors and Bi-directional Printing provide?
Thanks

Alan (or anyone else):
We're testing disabling the language monitor/bidirectional printing for one particular printer.
Can I confirm this is the procedure for disabling a particular print queue's Language Monitor and Bidirectional Printing? -
1. Locate the relevant Language Monitor registry key in: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
Either delete or rename the registry key (so it cannot be found), in my case: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\HPMLM121
I renamed it to have the date at the end (HPMLM121_2015-01-29).
2. Inside the above registry key is a DLL file mentioned under the DRIVER reference. In my case it's called: hpmlm121.dll.
I searched the entire C drive on the server and this was only found in C:\Windows\System32. I moved this elsewhere out of C:\Windows and also renamed the DLL too.
Therefore preventing Windows from being able to find/use it.
3. I then unticked Bidirectional Printing Support in the Printer Properties Ports tab of the printer in question.
4. Lastly either restart the server (or stop/restart the Spooler service).
I've done all this and the HP Print Notifications for Replace Cartridge etc... are still active.
Any idea why this is?
Thanks

What is the use of adding a property in forum administrator

What is the use of adding a property in forum options in forum administrator.
Process of adding a property ?
How does it effect?

Hi,
Check this link:
https://forums.oracle.com/thread/861349
--Sushant

Received a notice that could not use photo stream unless I updated my software. Went to apple preferences/icloud to disable photo stream. Not allowed to do so. What do I do to disable so I won't continue to receive annoying messages from apple/icl

received a notice that could not use photo stream unless I updated my software. Went to apple preferences/icloud to disable photo stream. Not allowed to do so. What do I do to disable so I won't continue to receive annoying messages from apple/icloud

I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS.

What is the procedure for disabling Entourage launching when clicking on an email address in Safari 5.0.5? I use Gmail.

What is the procedure for disabling Entourage launching when clicking on an email address in Safari 5.0.5? I use Gmail.

Is this about clicking a link in an external program?
You can check this pref on the about:config page for external links.
* browser.link.open_newwindow.override.external (-1)
If this pref has the default value -1 then browser.link.open_newwindow is used.
* http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

What can I use if I need htmlText property in Flex Mobile project

Hello,
What control exposes an htmlText propery in Flex Mobile? MXML or AS3, doesn't matter.

A strange blue-ish text? How could that possibly be of any help?
In other news:
Yeah, that's what I did after posting then resorted to using StageWebView or WebStageView, could never remember the name.
Thank you.

What property is used to disable SASL's DIGEST-MD5 domain name check.

Similar Messages

Maybe you are looking for