What's the difference between Standard and Enterprise?

Hi,
I want to download oracle 8i for linux,and I don't know
what's the difference between the standard and enterprise
version. Can anyone give me the answer? Thanks a lot.
forfun
null

forfun (guest) wrote:
: Hi,
: I want to download oracle 8i for linux,and I don't know
: what's the difference between the standard and enterprise
: version. Can anyone give me the answer? Thanks a lot.
: forfun
Enterprise vs Standard : technical view
If you install Enterprise you must:
- install Enterprise whith all the modules
- apply the patch 8.1.5.0.1
(if all the modules weren't installed, the patch fails because
he tries to relink non installed products)
If you install Stardard you must:
- install Standard
- no patch required !
Enterprise vs Standard : package
Standard is good enougth for a lot of purposes. It includes
TextRetrival, Java inside the database, etc.
With Enterprise, you can by additional products like Spatial
data, Time Series, etc.
Hope this helps,
Thanks to Yann Doussot for these informations
Gilles
http://perso.club-internet.fr/gbriard
null

Similar Messages

Does anyone know what is the difference between standard and value print cartridges?

I was wandering does anyone know what the difference is between the 2 I am not sure which one to get.

I do not know what printer and cartridges you are looking at, but there are typically "value" or XL cartridges that have approximately three times the ink at about twice the cost.
You can see the page yield for various printers here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

What is the difference between standard,sorted and hash table

<b>can anyone say what is the difference between standard,sorted and hash tabl</b>

Hi,
Standard Tables:
Standard tables have a linear index. You can access them using either the index or the key. If you use the key, the response time is in linear relationship to the number of table entries. The key of a standard table is always non-unique, and you may not include any specification for the uniqueness in the table definition.
This table type is particularly appropriate if you want to address individual table entries using the index. This is the quickest way to access table entries. To fill a standard table, append lines using the (APPEND) statement. You should read, modify and delete lines by referring to the index (INDEX option with the relevant ABAP command). The response time for accessing a standard table is in linear relation to the number of table entries. If you need to use key access, standard tables are appropriate if you can fill and process the table in separate steps. For example, you can fill a standard table by appending records and then sort it. If you then use key access with the binary search option (BINARY), the response time is in logarithmic relation to
the number of table entries.
Sorted Tables:
Sorted tables are always saved correctly sorted by key. They also have a linear key, and, like standard tables, you can access them using either the table index or the key. When you use the key, the response time is in logarithmic relationship to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique, or non-unique, and you must specify either UNIQUE or NON-UNIQUE in the table definition. Standard tables and sorted tables both belong to the generic group index tables.
This table type is particularly suitable if you want the table to be sorted while you are still adding entries to it. You fill the table using the (INSERT) statement, according to the sort sequence defined in the table key. Table entries that do not fit are recognised before they are inserted. The response time for access using the key is in logarithmic relation to the number of
table entries, since the system automatically uses a binary search. Sorted tables are appropriate for partially sequential processing in a LOOP, as long as the WHERE condition contains the beginning of the table key.
Hashed Tables:
Hashes tables have no internal linear index. You can only access hashed tables by specifying the key. The response time is constant, regardless of the number of table entries, since the search uses a hash algorithm. The key of a hashed table must be unique, and you must specify UNIQUE in the table definition.
This table type is particularly suitable if you want mainly to use key access for table entries. You cannot access hashed tables using the index. When you use key access, the response time remains constant, regardless of the number of table entries. As with database tables, the key of a hashed table is always unique. Hashed tables are therefore a useful way of constructing and
using internal tables that are similar to database tables.
Regards,
Ferry Lianto

What is the difference between JDK and J2ee

Could someone explain, in simple terms, what is the difference between JDK and J2ee. I am trying to understand the difference.
THanks

Could someone explain, in simple terms, what is the
difference between JDK and J2ee. I am trying to
understand the difference.You can practice on this one first. What's the difference between chalk and cheese? No just kidding.
A JDK is a set of tools for Java development including compiler, runtime system and standard libraries. J2EE is the enterprise version of the Java technology platform (it's one of three). To use it you download the proper JDK's.

What is the difference between view and materialized views

Hi
What is the difference between view and materialized view ? can we update the base table using views

can we update the base table using viewsYes:
VIEWS
1. an updatable view is one that lets you perform DML on the underlying table
(see Oracle Database Concepts 10g - 5 Schema Objects)
2. non-updatable view requires INSTEAD OF Triggers
(see Oracle Database Concepts 10g - 22 Triggers)
SNAPSHOTS
You can have updateable (and writeable) snapshots - in updateable (writeable) MV replication.
Oracle uses snapshots (Materialized Views - MV) for two different purposes:
1. replication
2. automated Query Rewrite facility (first introduced in Oracle Discoverer, later included in Oracle database 8i).
Replication types in Oracle are:
a) Basic replication (MV replication)
- transaction based
- row-level
- asynchronous from master table to MV (Materialized View)
- DML replication only
- database 7 / 8.0 / 8i / 9i / 10g
- Standard and Enterprise Edition
1. Read-only MV replication
2. Updateable MV replication:
2.1 asynchronous from MV to master
2.2 synchronous from MV to master
3. Writeable MV replication
b) Multimaster replication
- transaction based
- row-level or procedural
- asynchronous or synchronous
- DML and DDL replication
- database 7 / 8.0 / 8i / 9i / 10g
- Enterprise Edition only
1. row-level asynchronous replication
2. row-level synchronous replication
3. procedural asynchronous replication
4. procedural synchronous replication
c) Streams replication
- (redo) log based
- row-level
- asynchronous
- DML and DDL replication
- database 9i / 10g (10g has Down Streams Capture)
- Enterprise Edition only (Standard Edition 10g can execute Apply process)
Regards,
Zlatko Sirotic

What is the difference between ws_upload and gui_upload

what is the difference between ws_upload and gui_upload
what is the difference between ws_download and gui_down load
pls tell briefly

Hi Kuamr,
UPLOAD and DOWNLOAD, the function modules used until now are not part of the standard set of ABAP commands. They are used to display the file interface on the presentation server. UPLOAD and DOWNLOAD are not compatible with USs and have been replaced by GUI_UPLOAD and GUI_DOWNLOAD.
The new function modules, GUI_UPLOAD and GUI_DOWNLOAD, have an interface that also allows you to write Unicode format to the local hard drive. For a description of these interfaces, refer to the documentation for each function module, available under SAP Easy Access " Development " Function Builder " Goto " Documentation.
Instead of using the function modules, you can use the static methods GUI_UPLOAD and GUI_DOWNLOAD of the global class CL_GUI_FRONTEND_SERVICES.
Hope this resolves your query.
Reward all the helpful answers.
Regards

What's the difference between jsp and jsf?

who can tell me what's the difference between jsp and jsf?
I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)

Hi,
Find the difference between JSP and JSF
1. A developer has more control with JSP, but (should) get easier development with JSF
2. Event handling is done differently in JSP (HTTP) and JSF (Java)
3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
4. The end product should also be defined differently - JSP page versus a JSF application.
Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
If you are in this vacuum here are some key points promoting JSF:
1. Fundamental unit is the Component
2. Built in event and state management
3. Component sets can be provided by any vendor
4. Closer to ASP.Net or Swing development
5. Choice of UI technology
6. Scale up (rich clients)
7. Scale down (mobile devices)
8. Built into J2EE containers in J2EE 5.0 (tentative)

What are the differences between Essbase and Planning?

What are the differences between Essbase and Planning?

Planning is an enterprise application built around the Essbase OLAP engine.
You can create planning applications with Essbase only, but Planning uses best practises and has built-in enterprise features.
Brian Chow

What is the difference between ABAP and HR-ABAP?

Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.V

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif.

What is the difference between VK11 and VK31?

What is the difference between VK11 and VK31?
Thanks in Advance.
Nazim.

Hi,
They are the same really. VK31 came with a later SAP release and some
people say it is easier to use than VK11. In the end they are both used
for condition records.
Actually,the difference between VK11 and VK31 is that VK31,
VK32 ONLY work for standard SAP delivered Condition Types (ex.
PR00). If you create any customer specific Condition Type codes
(ex. ZXXX)you can only create / maintain Condition Records for
them using VK11, VK12.
In VK11 you can store condition record for more than one condition
type. This means you can have same condition record for different condition types.This feature is given to enhance the systems performance and not to create the duplication of the work for each condition type.
BOTH transactions allow mass entry and changes.
Regards,
Sophia Xavier

What is the difference between DSo and Infocube

Hello,
Kindly tell me what is the difference between DSO and Infocube?
And please tell me how to take the desicion that in whichi case we can use DSO and in which case we can use Infocube..

Hi ,
DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (for example, document number/item) and data fields that can also contain character fields (for example, order status, customer) as key figures. The data from a DataStore object can be updated with a delta update into InfoCubes and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Use
The cumulative update of key figures is supported for DataStore objects, just as it is with InfoCubes, but with DataStore objects it is also possible to overwrite data fields. This is particularly important with document-related structures. If documents are changed in the source system, these changes include both numeric fields, such as the order quantity, and non-numeric fields, such as the ship-to party, status and delivery date. To reproduce these changes in the DataStore objects in the BI system, you have to overwrite the relevant fields in the DataStore objects and set them to the current value. Furthermore, you can use an overwrite and the existing change log to render a source delta enabled. This means that the delta that is further updated to the InfoCubes, for example, is calculated from two successive after-images.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
Hope this helps,
Regards,
CSM Reddy

What is the difference between UPLOAD and WS_UPLOAD?

Hi,
What is the difference between UPLOAD and WS_UPLOAD?
Best Regards,
Gopal

Hi,
Both upload and ws_upload does the same functionality, that is transfere data from presentation server to application server or from PC to SAP system(to an internal table).
There are very few difference between the two.
1 Upload requires a User Interaction for uploading i.e., user has to respond to the dialog boxes that appear WS_Upload does not. You just need to specify the file location in the function input parameters itself.
2 upload - u can give the file in run time wsupload - u have to give in Function module
3 upload is meant to be used by abappers. ws_upload is meant to be called by SAP. It is not a standard ABAP command.
4 ws_upload is Obsolete : No longer supported by SAP. Use GUI_UPLOAD instead.
The fm WS_UPLOAD was the first version of fm to get a file from presentation server, now from 4.6 it's obsolete, the new fm is GUI_UPLOAD.
The fm UPLOAD is the fm used in several applications, like ABAP editor, to upload the file.
In the some versions (it depends on patch level) UPLOAD can call WS_UPLOAD (or GUI_UPLOAD).
Last but not the least, 'upload' internally calls 'ws_upload', that's the difference.
Hope this would be helpful.
regards,
Varun.

What is the difference between reset and adobe reset??

what is the difference between reset and adobe reset??

Reset and Reset (Adobe) will have the same effect unless you have changed the defaults.
For raw files LR uses its own defaults as the starting point for developing an image. For example, if you don’t apply your own import preset the standard default settings under detail are:
Sharpening:
Amount 25
Radius 1.0
Detail 25
Masking 0
Some users like to adjust these and make the tweaked settings into their own defaults. After making the desired adjustments in Develop simply hold down Alt and the reset button changes to Set Default.
Clicking the button will save the new default settings. This can be useful if you have more than one camera and wish to use different defaults for each.
To get back to the standard defaults simply hold down shift and click Reset (Adobe)
Restore
You can also restore the default settings globally in the develop module from the top menu:
Develop >> Set Default Settings
Then click the button "Restore Adobe Default Settings"
The standard defaults will then apply again to all future imports. For photos already in the catlaog where a non-standard default has already been applied you would need to adjust them manually using Shift+Reset (Adobe) but after adjusting one, it is then possible to sync all the others.

What is the difference between #variable_name and :variable_name?

Hi!
What is the difference between #variable_name and :variable_name?
I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
Any ideas how to solve that?
Thank you in advance!
Edited by: user13278245 on Sep 15, 2010 4:34 AM

Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
+ I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
Edited by: user13278245 on Sep 15, 2010 6:43 AM

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What's the difference between Standard and Enterprise?

Similar Messages

Maybe you are looking for