What's the length and width of an iPad?

Im doing a project and using the exact same shape of an iPad, so wondering if anyone knows the size of an iPad in "cm" ..

http://www.apple.com/ipad/specs/
Stedman

Similar Messages

What's the height and width of canvas3d

what's the height and width of canvas3d

I do not know if this will fully answer you question but:
1) For a successfully executed Canvas3D, there should be a default size based on the system. If c3d is a Canvas3D object, try System.out.println( c3d ); This will given the Canvas3D object's ID, upper left corner location, and size (plus a possible status indicator whose meaning I do not fully understand). Also, the methods getSize(), getHeight(), getWidth() can be used to get the Canvas3D object's size.
2) You can set the size and location of the Canvas3D object (which then can be added to some container of size W x H, e.g., JPanel) via:
Canvas3D c3d;
c3d.setSize(w, h); // where 0< w <= W and 0 < h <=H are preferred
c3d.setLocation(x, y); // where 0 <= x <= W-w and 0 <= y <= H-h are preferred
Note, the size and location can be set anytime after the Canvas3D object is declared/instantiated.
I hope that the above is helpful.
stmoss

Applescript to resize images by BOTH length and width?

I've searched for this, so please forgive me if I've somehow missed it. I'm looking for an Applescript that will resize both the length and width of an image. Ideally, I'd just like to save it to my desktop and drop images on it, resizing them to 250x166 pixels. Is this possible? I've seen scripts for length OR width, but nothing that will do both. I know, the images will be out of proportion, but for what I'm doing, that won't be an issue. Any help is greatly appreciated!

Your request is a little unusual, which may be part of your problem.
The issue is that, usually, when you resize an image you want to scale it proportionally to maintain the same aspect ratio. Otherwise you end up distorting the image in one direction.
For example, if your image is, say 250 x 84px and you just double the height to get 166px, the image will distort and probably not look like what you wanted.
So what you want is probably a combination of scale, crop and/or pad. Scale proportionally increases or decreases the image's dimensions. crop trims an image to a certain size, and pad expands an image's boundaries to fill the space. Anything more than that requires additional thought as to what you want the image to look like.

Get length and width of a rectangle

I am using sdo_sam.tiiled_bins to breakup rectangles into different sections. I need to divide the rectangle along the x or y axis depending on if is longer or wider. I checked the documentation and I could not find a way to get the length and width of a minimum bounding rectangle. Is there any built in functionality to get the length and width of a rectangle or do i have to create my own? Database is 11gr2.
Thanks
Rob

Rob,
You can use SDO_GEOM.SDO_MIN_MBR_ORDINATE and SDO_GEOM.SDO_MAX_MBR_ORDINATE to compute the length and width of an mbr.
References:
[ SDO_GEOM.SDO_MIN_MBR_ORDINATE | http://docs.oracle.com/cd/E11882_01/appdev.112/e11830/sdo_objgeom.htm#i866250 ]
[ SDO_GEOM.SDO_MAX_MBR_ORDINATE | http://docs.oracle.com/cd/E11882_01/appdev.112/e11830/sdo_objgeom.htm#i866249 ]
Regards,
Noel

Adjusting length and width by inches

I need to make a cover for a dvd using 5 x 7.3 is there any way to adjust the length and width. i know you can adjust the width at the top but i also need to adjust the length. does anyone know how to do this.
thanks

jseth wrote:
thank you so much, also is there a way to make the whole background black?
for the entire page or for the box ?
If it's for the box, create a rectangular shape with black border and background then enter your text in the shape.
Yvan KOENIG (from FRANCE dimanche 17 mai 2009 19:24:54)

What are the units of "Width" and "Height" of a Shape?

What are the units of "Width" and "Height" properties of a Shape when programming?
Something odd like points or twips or tweedles or nibbles?
http://www.ransen.com Cad and Graphics software

Width and Height are properties of type Single; they represent the dimensions of the shape in points, where 72 points = 1 inch.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

What is the length of the Lightning cable that comes with the iPad Air?

Actually have three questions.
1. What is the length of the Lightning cable that came with my iPad Air? I ask because I might need to purchase a new one.
2. My current Lightning cable, the one that came with my Air, the end of the cable, the rubber is coming off, it's stretched. Would AC+ send me a new one?
3. I have an iPhone 5s also, does the iPhone have it's own unique Lightning cable or can I use my iPad Air Lightning cable to charge my iPhone and vice versa, are the Lightning cables universal with the newer products?
Thanks.

http://store.apple.com/us/ipad/ipad-accessories/cables-docks#!

Measuring length and width of objects

I want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below).
Does anyone know how to do that? Is it also possible to do it automatically?
Thanks!

11ilse11 wrote:
I want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below).
Does anyone know how to do that? Is it also possible to do it automatically?
Would a measurement using the Ruler tool accomplish this? Trace over your green line with the ruler then read distance traversed between endpoints of the line in the ruler tool options bar.
You then could determine perpendicular width by rotating the image such that the green line is vertical.* Then measure width with a horizontal line.
* You can drag out a measure line on an image feature that should be horizontal or vertical, and then choose Image >
Image Rotation > Arbitrary. The correct angle of rotation required to straighten the image is automatically entered into the
Rotate Canvas dialog box.

What is the best column width & font size for an ipad magazine

I'm creating a magazine that will be shown on the ipad I was wondering what is the best column width and font size to use. If someone has any suggestions I'd love the help.
thanks,

You should know how you publish it and what the technical limitations of each type are.
No one can or will give you any advise to use this or that font. Make several drafts, try it, pass on several drafts to testers and get response.
If you work with styles, it is then easy for you to change it to the best result with a few clicks.
Normally a column width with 37 to 45 letters I would personally suggest to be the best width, but opinions are very different on it. The more letters in a line the less readability is given, the less letters the more difficulty you will have to get an even grey factor. (I mean that through space between words some lines become bright others dark, which does not look so fine, I don't know the English technical term for that.)

Dynamically changing the height and width of Stage

Hi,
          I would like to know how can I change the height and width of stage dynamically. I tried it with the following code:
                         Stage.height = 250;
                         Stage.width = 250;
during the run time. Initially the Stage is at a height and width of 370 and 450 respectively. Also when I tried to trace the height and width of Stage after resizing the stage width and height, its showing the old value of width and height. That means the width and height not chnaging. Anybody have any idea about this.

Hi Ross,
            I could understand something about the problem after making a research on this topic. We can't change the width and height of stage from actionscript itself, right? I will explain the way I am planning to do. I don't know whether its right or not. Anyway you just go through it. First the player need to be resized, according to the specified height and width. Then in the object tag, there are two fields named height and width. We should change these value according to the specified height and width of video controller, dynamically. Am I right? But I am confused with two properties of Stage such as: align and scaleMode. The code was actually developed my trainer. There, the scaleMode is set to "noScale" and no align property is used. My doubt is how should I set align and scaleMode properties of Stage. Hope you understood what I meant.
Regards,
      Sreelash.S.

Trying to determine the height and width of an image.

Hi Everyone,
I am currently trying to work out the height and width of a number of pictures. I have tried a couple of techniques. One involved using BufferedImages, which kept on throwing null pointer exceptions. So I am now tring to use the Image class from java.awt.Image. However I need to use an ImageObserver or some such thing, of which I have absolutely no knowledge. If there is anybody out there who knows how to gather the information I speak of from a number of photos, and is feeling kind enough to impart their knowledge to me it will be greatly appreciated. Thanks.
Regards
David

Well, maybe your problem is loading in the images, but I'm assuming you know what your question is since I don't feel like going into what ImageObserver does (That's what google is for).
Anyways, to get the height and width of an image you do this:
You initialize your image:
Image image = getImage("file.jpg") //I don't remember the if this is correct, it's just my memory.To get the dimensions"
image.getWidth();
image.getHeight();If these return 0 it's more than likely because the image hasn't loaded correctly, which is why you need ImageObserver (IIRC there is a better API in the new ImageIO library, check the API).
Best of luck.
Virum

What do the DB_BLOCK_GETS and CONSISTENT_GETS means?

what do the DB_BLOCK_GETS and CONSISTENT_GETS means?

See few links that explains it in greater lengths.
By Martin Wildlake
By Jonathan Lewis
Personally, I find Jonathan's blog better explanatory. And hope, this helps you in clearing your doubts.

How to get length and width of a textbox or image box and display on a dialog

Hi,
When I draw a textbox or frame on a document, and If I select it then I want to display its length and width on a dialog.I am not able to solve it, Can anybody help me ?
Can u suggest some sites or online books about Indesign plugin development programming using c++.
Thanks,
Ravi Sharma

Thanks Schneider. It was very helpful. As I am new to Indesign CS3 SDK programming. I am not able to understand the syntax of this programming , How to use InterfacePtr. For eg: InterfacePtr<IClassIDData> orgDocFileHandlerData(doc, IID_ORGICLASSIDDATA); Can u please explain me this and suggest some good sites/online books about Indesign CS3 SDK programming for Windows and Mac. Thanks n Regards, Ravi Sharma

What is the best and most stable firmware for wrt1900ac?

I recently got the wrt1900ac and I wabt to update the firmware. What is the best and most stable firmware for wrt1900ac?

The most current version is pretty stable aside the Network Map App which is known to cause a router reboot. Linksys is aware of this and is working on fixing it. Just don't use this app.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
My current WiFi settings that are working well are Mixed Mode on both radios, Mixed Channel width on both radios, WPA2 only. Manual channel 11 on 2.4Ghz and 149 on 5Ghz. However those channels for your use will depend on whos near by your surroundings found in the InSSIDer app and you'll need to adjust accordingly to channels that are not being used which are preferred 1, 6 and 11 or (13 for out side of the north america region) on 2.4Ghz. WPS, Media Filter and IPv6 disabled. USB Drive Share, WMM and Media Prioritization enabled. LinksysSmartWiFi is enabled along with mobile access app on Iphone 4S works.

What is the best and safest way to convert songs from a dvd to an audio MP3?

What is the best and safest way to convert a song/or songs from a dvd to an audio MP3? Are there any free safe converters?
I have some live music from a concert (currently available on dvd only) that I want to convert to MP3 ... playable on my iphone.
Thanks!

Java float; IEEE 754 single precision has 32 bits: 1 sign bit, 8 bits of exponent, 23 bits for the mantissa.
Java double; IEEE 754 double precision has 64 bits: 1 sign bit, 11 bits of exponent, 52 bits for the mantissa.
When you widen a float value to a double this is what happens to the bits
   float: s y   xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm
   double: s y???xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm00000000000000000000000000000try this
class Widen {
    public static void main(String[] arg) {
        float f = (float)Math.PI;
        if (arg.length>0) {
            f = Float.parseFloat(arg[0]);
        double d = f;
        StringBuilder sf = new StringBuilder(toBinaryString(Float.floatToRawIntBits(f)));
        StringBuilder sd = new StringBuilder(toBinaryString(Double.doubleToRawLongBits(d)));
        sf.insert(1+8," ").insert(2,"   " ).insert(1," ");
        sd.insert(1+11," ")                .insert(1," ");
        System.out.println(sf.toString());
        System.out.println(sd.toString());
    static String toBinaryString(int i) {
        return toBinaryString((long)i).substring(32);
    static String toBinaryString(long l) {
        StringBuilder sb = new StringBuilder();
        for(int i=63;i>-1;--i) {
            sb.append(((l>>i)&1)==0?'0':'1');
        return sb.toString();
}Please point out where you think there is loss of precision.

What's the length and width of an iPad?

Similar Messages

Maybe you are looking for