What's the "Line-in" thing for on my Zen Nano Pl

I have a Zen Nano Plus and I want to know what the "Line-in" thing is for and how do I use it's

It's for connecting a line-out level signal to for recording (this should be documented in the manual as well, although it isn't available for download at Nomadworld.com so I can't check).
A line-out level signal could be from an amplifier (e.g. a headphone socket, or even better a proper line-out level connection) or a pre-amped microphone. Be warned though, a lot of people are saying the line-in on this (and I think the predecessor MuVo N200) aren't very good.

Similar Messages

So iWeb is dead? what is the next best thing for a beginner?

Hi Guys,
I have my new Mac and i want to build my first website....with iWeb dead, what is the next best web builder for a beginner like me...? I want to creat a blog add the odd photo and link to my twitter page. Thats about it.....any suggestions?
Many thanks
Ian

Are you saying that you have an iWeb blog hosted on a 3rd party ftp server which allows visitors to add comments? That would be a first since the following has always been part of iWeb's Help file:
Features Unavailable When Publishing to a 3rd Party Server:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
The following is a screenshot of iWeb Help on publishing to an ftp server:
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two feature will be broken.
OT

What is the relevence of MD04 for SD and what r the things we hav to look

what is the relevence of MD04 for SD and what r the things we hav to look

Hi Venkata,
MD04 will show a collection of the incoming and outgoing stock changes.
And for SD, it will display the content in table VBBE and VBBS (single requirement and total requirement).
The content was updated when the schedule line category is configured as relevant for requirement transfer.
And I often use MD04 together with CO09 to estimate/check a ATP checking result.
Hope this could do help!
Hongyan

What's the "Line In" on the diagnostic and how to use it?

I'm just really curious about this. I was looking through the diagnostic screen on my iPod and went to the "Line In" choice. I selected it, and pressed Action like it said and it didn't do anything. What is the Line In function on this and what can I do with it and use it?
Another thing is I've installed Rockbox on mine and have used it for 6 months, and it has a Recording feature on it, and for a source to record from, I can select Line In or Microphone and I'm wondering if this is the same thing.
Thanks!

hi
<b>
USEREXIT_PRICING_CHECK</b> (module pool SAPMV61, program MV61AFZA)
You can install additional checks to the standard checks of condition lines (e.g. maximum/minimum value).
<b>USEREXIT_XKOMV_ERGAENZEN_MANU</b> (module pool SAPLV61A, program RV61AFZB)
You can use this user exit to change the ready-for-input fields of the manually entered condition record in add mode in the condition screen.
Just have look below link
http://help.sap.com/saphelp_40b/helpdata/es/14/f62c7dd435d1118b3f0060b03ca329/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/14/f62c7dd435d1118b3f0060b03ca329/frameset.htm
regards
vinod

What is the best virus protection for a Mac?

What is the best virus protection for a Mac?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style "virus" affecting OS X. Merely loading a page with malicious Java content could be harmful. Fortunately, Java on the Web is mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers. In Safari, this is done by unchecking the box marked Enable Java in the Security tab of the preferences dialog.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a specific task, enable Java only when needed for the task and disable it immediately when done. Close all other browser windows and tabs, and don't visit any other sites while Java is active. Never enable Java on a public web page that carries third-party advertising. Use it, when necessary, only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but they get a false sense of security from it, and then they may behave in ways that expose them to higher risk. Nothing can lessen the need for safe computing practices.
10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

HT4664 What is the best graphics card for FCPX?

In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
"Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
Apple lists this card on its support page: http://support.apple.com/kb/HT4664
So,
What is the best graphics card for FCPX?

Ben,
Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the cause and fix for the following error message? NS_ERROR_FILE_ACCESS_DENIED failure code: 0x80520015

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

I have a 13 inch macbook (late 2007) what is the maximum allowable height for a hard drive?

what is the maximum allowable height for an internal hard drive. I want to replace my hard drive are there any other things I should make sure of in terms of compatability?

timfromdoylestown wrote:
would they erase it and reformat it? what is the purpose of doing so?
they have to format it to make it mac "compatible", for a lack of better terms. I don't know what they would do.

What do the symbol and stand for in the following script? not like displa

What do the symbol *>* and *>>* stand for in the following script? It is displacement? They do not like displacement symbols.
$JAVA_HOME/bin/java -cp $CLASSPATH $JVM_OPT $SYS_OPT
oracle.sysman.integration.coherence.EMIntegrationServer *>* $COHERENCE_
HOME/mgmtnode.log *>>* $COHERENCE_HOME/mgmtnode.err &
Thank you

jverd wrote:
BigDaddyLoveHandles wrote:
But the example, if it's correct, seems to be using >> to redirect stderr, not to append stdout. The OP should identify what OS and what shell they are using.In any unix shell I'm aware of, > is overwrite and >> is append.Which is why he said "seems to be using >> to redirect stderr". Which I read to mean that BDLH also found it to be incorrect but some "corner-product" shell may do this sort of thing (not that I know, or have heard, of any that do). ;-)
In a bourne family shell, the initial construct would cause stdout to replace the log file and append the err file, and would not redirect stderr.
If you want to send stdout to one file and stderr to another, with overwrite, it'd be
command > logfile 2> errfile
Correct, of course. ;-)
And, of course, changing either of those ">" symbols to ">>" would append (that stream), but you've already said that. ;-)

What is the safest app remover for OS X ?

What is the safest app remover for OS X (Yosemite) ?

So I then assume that you want to know when removal app can figure out if another app installed any malware and if so, then remove it? Of if not, just remove "all" the pieces associated with the app?
Is that your "wish"?
If so, I doubt that is gonna be possible. People are pretty clever about how to get bogus software installed as part of another app that appears to be OK, so think it's gonna come down to having somebody else, just as clever hopefully, maybe even more clever, to figure out what exactly is part of an app and then how to remove all of it's pieces. Stick with installing reputable software from the App Store or reputable developers - then you don't need to worry so much about malware.
The two apps that Eric Root referred to are popular. I use one called "AppCleaner 2". I've used AppZapper but not AppDelete. Between AppZapper and AppCleaner I prefer the latter cause it shows you the exact path of the items it's about to delete where AppZapper just shows the name (not the path which is very important I think), plus AppCleaner seems to do a more thorough job at finding more files pertaining to the app you're trying to get rid of. For example here is what AppZapper and AppCleaner show when removing the same app named AppleWadministrator:
So AppCleaner found two other files that AppZapper didn't and it shows the paths of all items that it wants to delete.
But like Eric Root also said - double check all the files that the app cleaner is gonna delete and make sure they make sense.
Another thing that has helped me many times is to take a screenshot of the app cleaner window - this lets you have a record of the files that were deleted for a particular app (and also the path it came from for AppCleaner but not for App Zapper) so in case you need to recover things from the trash later you know where they should be moved back to.
Not sure if the "AppDelete" Eric Root referred to is the "AppDelete Lite" in the App Store or not, but if it is, it's $3.99. AppZapper costs $12.95 (but I'v seen it for about half that in MacUpdate promos) and AppCleaner is free, but they can't be obtained from App Store, but from the developers website. Also the "AppDelete Lite" hasn't been updated since May 2014, so it's not clear if it supports Yosemite or not. There is a version called "AppDelete" from the same developer as the "AppDelete Lite" so they must be similar. The AppDelete says it's $7.99 on the developer web site at (but apparently not available on the App Store) and they also have a free trial for the "AppDelete" version. Apparently the main difference between the two versions of AppDelete and AppDelete Lite, is the Lite version can't remove password-protected files to the trash because "App Store apps cannot ask for passwords" according to the developer website at http://www.reggieashworth.com/appdeletelite - the user must do the removal manually with the Lite version but not the full version.
I just checked RoaringApps website for OS X compatibility and:
     AppCleaner -- works on version 10.6 thru 10.10 (Snow Leopard thru Yosemite)
     AppDelete -- works on version 10.7 thru 10.9 (Lion thru Mavericks)
     AppZapper -- works on version 10.6 thru 10.10 (Snow Leopard thru Yosemite)
AppZapper can be found at http://www.appzapper.com
AppCleaner can be found at http://www.freemacsoft.net
So maybe Eric Root has some experience and could compare AppDelete with AppCleaner and say if AppDelete is worth paying $8 for the full version or $4 for the Lite version or if AppCleaner for free has some deficiencies compared to AppDelete.
Good luck...

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

What is the exact file name for Adobe Photoshop Elements application?

what is the exact file name for Adobe Photoshop Elements application?
I jsut downn laoded it and the alias does not work. in the support folder I have an application titled Adobe photoshop Elements Editor and it lauches ok but when I got to import a photo it only asks for a frame from a video.

You do not import anything to the editor. You just open things there using File>Open. Import is only for frame from video and for scanning if your scanner is compatible and you install the PSE twain plug-in.
If you wish to use PSE to keep track of your photos, launch Adobe Elements 11 Organizer instead of the editor.

What is the last software update for N95 8g..??

what is the last software update for N95 8g and what are its problems any one feel after new update??

IN N95 8GB sometimes when I try to open music player,it hang and close by itself although I use only 2 gigabytes of mass storage memory and I have to restsrt phone to make this music player work quickly and normally again but this problem repeat again and again in sometimes and I do not know what I can do to solve this bad problem and I found that when music player hang, every thing in mobile like web or search or camera applications....etc still work without hanging except gallery and video center and real player applcations!!! can any one tell me If he face such as this stubid problem..

What's the "Line-in" thing for on my Zen Nano Pl

Similar Messages

Maybe you are looking for