What should I do after creating the Web Serice?

Hi.experts:
I want to create a web service in my ECC 6.0 System.I have created a Web Service on my BAPI,then what should i do in SOAMANAGER,because I do all settings in WSADMIN and WSCONFIG to publish and test the WS in the old version ERP,what should I do in new ECC 6.0?
Best Regards
Martin Xie

You have to create an endpoint for the service definition which you have created. This endpoint actually creates a service in the system for communication and you have to invoke the endpoint URL whenever you communicate to thise service provider.
More info can be get it from following link:
[http://help.sap.com/saphelp_nw70/helpdata/EN/b0/787748cf3a4200bb1ba32a62aa8519/content.htm]
Configuring a Service Provider section from the above llink will be useful for you as of now.
Edited by: Siva Satya Prasad Yerra on Jul 14, 2009 3:27 PM
Edited by: Siva Satya Prasad Yerra on Jul 14, 2009 3:28 PM

Similar Messages

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

When i want to create my apple ID without credit card (while the none button is on), the message "contact itunes support to complete this transaction" is showing. what does it mean and what should i do to create my apple ID?

when i want to create my apple ID without credit card (while the none button is on), the message "contact itunes support to complete this transaction" is showing at the last step. what does it mean and what should i do to create my apple ID?

Creating an iTunes store/iBookstore/Mac App Store account without a credit card
Follow the instructions carefully and to the letter.

How to find the navigation bar at the apps, PDF reader Lite? after i zoom in, the navigation bar dissapear~ what should i do to make the navigation bar reappear?

How to find the navigation bar at the apps, PDF reader Lite? after i zoom in, the navigation bar dissapear~ what should i do to make the navigation bar reappear?

Hello,
Yes it will be in your page template. You just need to move #NAVIGATION_BAR# substitution under the #LOGO# substitution tag, probably something like this should work
#LOGO#<div>#NAVIGATION_BAR#</div>
Carl

What is the difference between these two URLS after creating the desktop

Hi
I am accessing one portlet (Portlet is Remote portlet), after created the desktop,
this URL is : http://localhost:7001/DemoPortalWeb/page/Demo/desktop/ServiceDelivery
It successfully rendering to login portlet now, when i am trying to hit the valid URL
http://localhost:7001/DemoPortalWeb/appmanager/Demo/desktop/servicedelivery
it is giving the Error code 404
only difference is that 'appmanager' is replaced with 'page', How to access my portlet with
this URL http://localhost:7001/DemoPortalWeb/page/Demo/desktop/ServiceDelivery

Hello,
To change the "appmanager" portion of the URL, all you need to do is add another servlet-mapping to your (consumer) webapp's WEB-INF/web.xml file. For example, if you wanted "page" to work as a replacement for "appmanager", you could add this to web.xml:
<servlet-mapping>
<servlet-name>AppManagerServlet</servlet-name>
<url-pattern>/page/*</url-pattern>
</servlet-mapping> Kevin

What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search.

Question
What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search. edit

The home button has by default moved to the right hand edge of the navigation toolbar. You can move it back by right-clicking on a toolbar, choose customize to open the customize toolbar window, then with that window on display you can drag and drop icons to move them.
If the home icon is not at the right end of the navigation toolbar, use the procedures in the following link to restore it - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

SUBMIT an ABAP report after creating the WI but before completion of WI.

Dear All,
I am having an activity which sends the approval work item.
Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
I can not call this report before approval activity because i need to pass this WI ID to this report.
Please suggest some way to solve this.
Regards,
Amar

Hello,
You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
What is the purpose of this report? Why does it need the workitem id?
regards
Rick Bakker
hanabi technology

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

I create a new apple account but i dont have credit card.what should i do, i create a new apple account but i dont have credit card.what should i do

i create a new apple account but i dont have credit card.what should i do, i create a new apple account but i dont have credit card.what should i do

Hi fahmeed,
Thanks for visiting Apple Support Communities.
If you need to create an Apple ID (iTunes, iBooks, or App Store account) without a credit card, see the instructions in this article:
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
If you already have an account created, but need to change the payment information, see this article:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Best,
Jeremy

What should be done to include the current controlfile in the database copy

Hi
When trying to create a copy of the database it always fails copying the controlfile
What should be done to include the current controlfile in the database copy with the %b format
RMAN> backup as copy database format 'd:\backup\%b'
2> ;
Starting backup at 13-SEP-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
input datafile file number=00001 name=D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=D:\BACKUP\SYSTEM01.DBF tag=TAG20100913T204940 RECID=16 STAMP=729636617
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile file number=00003 name=D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=D:\BACKUP\UNDOTBS01.DBF tag=TAG20100913T204940 RECID=17 STAMP=729636660
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile file number=00002 name=D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=D:\BACKUP\SYSAUX01.DBF tag=TAG20100913T204940 RECID=18 STAMP=729636692
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
*copying current *control file**
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:36
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpn
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=D:\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=D:\BACKUP\USERS01.DBF tag=TAG20100913T204940 RECID=19 STAMP=729636697
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:01
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
*including current SPFILE in backup set*
channel ORA_DISK_1: starting piece 1 at 13-SEP-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:38
ORA-19715: invalid format b for generated name
ORA-27302: failure occurred at: slgpnEdited by: hrishy on Sep 13, 2010 8:26 AM

hrishy wrote:
Allright your trick configure controlfile autobackup on does the trick but i am cluless why it worksWhy clueless? That's a documented and a perfectly normal behavior!
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV89408
HTH
Aman....

What should be done to recover the database?

Hi all,
While backing up the database, the computer running Oracle loses power. After restarting the
computer what should be done to recover the database?
Please help me..
Thank you all for your cooperate.

Thanks mr. Eduardo Rezende.
I'm an Arab student and now I study database administrator course. This question asked by my teacher. So, if anyone can answer this question and some other questions please help me.

What should I do to create an planning area?

Hi everyone ,
what should I do to create an new planning area?
best regards,
David

Hi Michael,
I just want to understand, what we do in the "Supply Chain Design Master Data" in the view "Sites/Locations" to make the planning area active.
Because we just enable the logistics area, the roles and usages.
Apart from that we will bot be doing anything over there. Hence kindly clarify if i wrong.
Regards,
Samraj

Since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

What should I do after creating the Web Serice?

Similar Messages

Maybe you are looking for