What solution to include a repititive fragmet into a creator jsf page?

Hi
Thank you for reading my post
what is the solution to include a repeatitive fragment into a jsf file?
for example i should show company information for X number of companies,
i think the most good way is to create some kind of page fragment, include it into the main page and pass each company parameters to it in a loop,
is there such facilities in creator visual pages?
it is available in Jdeveloper and ADF Faces, but i do not know how i can have this facility in Creator.
Thanks

Hi
Thank you for reply.
but i think page fragments are for static imports, for example to layout the entire pages ( menu fragment, news fragment,...)
what i need is something like include tag in jsp with ability to pass a map of parameter to it.
imagine that you have to show some number of records from a database but not in tabular format.
what will you do when total number of records is not known in design time?
you need to create a template to show records in that template, then you include that template as many times as it is required and you pass parameters to it in each iteration of loop that you used.
thanks

Similar Messages

POJO How to include a Image/Picture into a report

Hi All,
the POJO Data Source support works fine but how can i include a image/picture into a Report ??
My Pojo contains a Blob and a byte[] but if i trag 'n' drop it onto the report design surface (myReport.rpt), C4E creates automatic fields for me but the Blob and the byte[] does not become available for reporting.
In the application i would like to move a image into the blob or into the byte[].
What is wrong ??
Thanks a lot for Your help
René
MY POJO
public class RhuPlakatData {
private String text11;
private Blob blob1;
private byte[] bytes;
public byte[] getBytes() {
return bytes;
public void setBytes(byte[] bytes) {
this.bytes = bytes;
public String getText11() {
return text11;
public void setText11(String text11) {
this.text11 = text11;
public Blob getBlob1() {
return blob1;
public void setBlob1(Blob blob1) {
this.blob1 = blob1;

Hi James
Unfortunately, I found no solution.
Did You found a solution??
Thanks for Your help
Greetings
René

What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe s

What solutions are there for Adobe Cloud subscribers/designers who are using/have been using Adobe software but have run into system requirement inadequacies etc. . . Basically, I have a new mac and CS6 runs fine. But my old macbook can only run CS5.5. Because I'm a subscriber my Adobe CS5.5 updated automatically. What happens when one day a year or two from now (or sooner) my MAC won't support the latest version of my CS subscription? Is there a way for cloud subscribers to subscribe to a legacy or an older version of CS?

Hi Wildeboer420,
Its my understanding that previous versions will still be acessible for users going forward, I copied the following from the FAQ
I am a Creative Cloud member using the CS6 applications included in my membership. Will I lose access to CS6 when CS7 becomes available in Creative Cloud?
No, if you have downloaded and installed the CS6 versions of the applications, you will continue to have access to them without interruption as long as your membership remains active. When the CS7 versions become available, you will have up to a year to download and install them and they will run on your machine along with CS6 versions.
Hope that helps,
-Dave

How to include a KB Update into a WIM in order to point to the WIM when using DISM (details inside)?

Hi, I was told in another of the forums that my issue
is best suited for the TechNet audience. Previously, I posted it here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/how-to-include-a-kb-update-into-a-wim-in-order-to/e7015076-b4a9-4862-a73b-6c58b4c82461?tm=1409598696763
I've been struggling to fix a corrupted file.
Context: I feel that something is not right with the computer, so I started poking around.
I used "sfc /scannow" from an elevated command prompt and the result was:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log <var style="border:0px;margin:0px;padding:0px;vertical-align:top;-webkit-font-smoothing:antialiased;">%WinDir%</var>\Logs\CBS\CBS.log.
I looked in the log. This message appears 4 times:
Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate",
TypeName neutral, PublicKey neutral in the store, hash mismatch
There is also the following message:
This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
I'm not positive what to do next, but I have been led to believe the problem is that Flash files in version 6.3.9600.16407 are corrupted, that I need to find which KB updates Flash to this version, download the file, add it to a new WIM, and point
to it when using DISM. I'm not positive this is correct, but it was suggested.
I downloaded the KB update: kb2889543, but I do not know how to add it to a new WIM or what the repercussions of doing so will be (e.g. Will I lose everything and have to restore my documents, etc from my external drive by doing this?).
So, the question is: How can I include a KB Update into a WIM and tell me what the result will be when once I do and point to it when using DISM?
Secondarily, if this is a bad way to move forward with the issue, would some kind soul offer sage advise on how to move forward with resolving the original issue?

Hi TTQSTTQS,
As you mentioned in the answers forum, when run the command DISM /Online /Cleanup-Image /RestoreHealth, we received the error message “The source files could not be downloaded. Use the "source" option to specify the
location of the files that are required to restore the feature”.
When run the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess, we met the same error message.
I think there are some mistakes in the source setting, so we meet the same error messages.
As I mentioned in the last reply, we need a mounted image as a repair source, and then use this path.
We need to configure a Windows repair source. Please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825020.aspx
Please refer to the following steps to set the source image.
1. Assign Drive Letters to Partitions by Windows PE.
2. Capture Partition Images using DISM
For more information, please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825072.aspx
Then, we could try the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to include several PDF documents into just one file?

I have a Word document with 6 pages that I saved in PDF.
I wanted to transform the entire document in JPEG (JPG) immage, so that I could use it in other tools, such as Facebook for example.
The problem is that using Adobe Photoshop it opens and saves page by page.
Can you give me s solution or hint?
Flavio
[email protected]

Thank you!
I already saved all pages as .pdf w/ Acrobat and have all 6 pages saved in
.jpg, using Photoshop.
Problem is that I want to post the whole text in my Facebook page, and to
have it in six pieces is not quite readable...
Thanks anyway and have a joyful Xmas!
2011/12/24 try67 <[email protected]>
Re: How to include several PDF documents into just one file? created
by try67 <http://forums.adobe.com/people/try67> in Adobe Reader - View
the full discussion <http://forums.adobe.com/message/4102594#4102594>

What Prefixes Are Included In My Local Calling Area?

I am in the former GTE service territory, specifically, the Elsinore Main California exchange.
On Friday, December 11, 2009, I spoke with a service representative and a supervisor (who admitted that she was "filling-in" and is really an hourly employee), who are in the soon to be divested Everett, WA call center.
I was calling to find out what prefixes are included as part of my local calling area, specifically ZUM 1 AND ZUM 2 (some also call it Zone 1 and Zone 2, but the correct designation in most southern California service areas of Verizon is ZUM).
Both representatives had no idea what a "ZUM" is, and the "supervisor" said she had never heard of the term ZUM or Zone.
What made me upset is that I was told that they (Verizon) did not have this information, and I would have to contact the CPUC (California Public Utilities Commission) to obtain this information as Verizon's staff would not have it.
My reply was how would Verizon not have the information, because they would need the ZUM prefix list for each exchange so they could bill correctly.
I then asked how does Verizon gather all the calls that are made from their exchanges each month and send this data to the CPUC so that Verizon can then determine if the call is ZUM 1, ZUM 2, ZUM 3 or intralata or interlata?
The "supervisor", said yes, because Verizon would not know what prefixes are included, and relies upon the CPUC to review the calls from Verizon's exchanges and prefixes so that Verizon can bill their customers each month, and this has been the process for many years (according to the "supervisor").
I kid you not, this what was said to me by the Verizon representatives, and I shoulld have advised the employees that I was recording the call. It would have been a great play for You Tube. What a bunch of (edit) from these two Verizon call center representatives!
I'm glad Verizon is divesting the Everett call center along with other assets to Frontier, as people like these should not be employed by Verizon, in fact, they should be terminated for cause. Good luck to Frontier with the Everett call center.
Using Verizon's web site when trying to determine what prefixes are in my local calling area (ZUM 1 AND ZUM 2), you are directed to use the following two "very helpful" (my words...lol) links for information...please try for yourselves:
To obtain Local Calling Area information
http://www22.verizon.com/Content/CommonTemplates/sorry.html
Zone Usage Measurement (ZUM) Information
https://www22.verizon.com/ResidentialHelp/Phone/Calling+Plans/Local+And+Regional+Calling+Plans/Gener...
Great Information Verizon!! Both are dead links.
Anyway, point me in the direction where I can obtain the current and accurate prefixes that can be called without charge to ZUM 1 and ZUM 2, and with a charge to ZUM 3 for my exchange and prefixes. DO NOT point me to a white pages directory because that is already outdated (and I do not have a white pages directory).
Again, my exchange is Elsinore Main, and the prefixes are 951-245 and 951-674.
Thank you.
Solved!
Go to Solution.

Home Exchange, Zone 1 and 2 are Local Calling
Zone 3 (ZUM) 13-16 Miles:
PEAK PERIOD RATES: Day 8A-5P   M-F
                          1st Min of Use       Addl Min of Use
                               $.10                          $.04
OFF-PEAK RATE PERIOD: Evening 5P-11P M-F
                               $.07                          $.028
OFF-PEAK RATE PERIOD: Night 11P-8A M-F; SA, SU, & HOLIDAY - All Hours
                               $.04                          $.016
COMMUNITY ---NPA ---NXX ---ZONE -----
ELSINORE ---951 --- 226 245 253 285 471 579 609 674 678 805 --- Home Exch
LAKEVIEW-NUEVO --- 909 --- 251 --- Zone 3
LAKEVIEW-NUEVO --- 951 --- 878 916 928 --- Zone 3
MURRIETA --- 909 ---3 32 --- Zone 2
MURRIETA --- 951 --- 200 219 239 249 304 440 445 461 473 600 671 677 691 696 698 704 813 816 834 837 894 970 973 ---Zone 2
PERRIS --- 909 --- 330 --- Zone 2
PERRIS --- 951 --- 210 229 230 238 259 287 345 378 385 436 442 443 490 550 570 575 581 591 623 657 722 796 940 943 956 --- Zone 2
RANCHO VIEJO --- 949 --- 259 269 284 292 303 326 350 446 480 584 625 702 728 874 --- Zone 3
SUN CITY --- 909 ---508--- Zone 1
SUN CITY --- 951 --- 244 246 301 566 639 672 679 723 746 821 --- Zone 1
TEMECULA --- 909 --- 298 507 668 828 --- Zone 3

How can I include my database file into my jar file?

Hi,
I am doing several tests for the jar command....
I tried to put the database file into my jar file, but when the program run, it just couldn't find the database file, so how may I include the database file into the jar file? Not only that, it also can't find the policy file etc.

sorry, I think I found the solution, I should have had read the API more carefully.

Include web link document into learning map

Hellow!
1. We have all user instruction in our intranet web server (instructions are created using RWD ).
2. I insert this instruction into training material tab in solar02 transaction in solution manager.
3. I create learning map in solution manager and include these training material into this map.
4. And then I open this map in web browser. Map is ok , chapters units and so on but links into training materials are not appears in page. Just empty rectangles.
Any Ideas ?
Andrey Garshin.

Hi,
Please check whether the needed roles and authoraisation assigned.
The roles are below "SAP_SOL_LEARNING_MAP_DIS,SAP_DMDDEF_DIS"
more on refer here [Overview of SAP roles|http://help.sap.com/saphelp_sm32/helpdata/en/45/cb27429d16db2ce10000000a1550b0/content.htm]
And please verify your config steps against the document [http://wiki.sdn.sap.com/wiki/display/EHP/SolutionManagerLearningMaps|http://wiki.sdn.sap.com/wiki/display/EHP/SolutionManagerLearningMaps]
Jansi

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

If you have not already created an iCloud account elsewhere you cannot do so on PC, and that is the error message you will get. You can create an iCloud account on a Mac or an iOS device and then you should be able to sign into it in the iCloud Control Panel in Windows.

I have a back up of the folder 'iTunes Media' on a Nas (LaCie CloudBox). I do a weekly update. Everything is cool.Now I would love to keep the folder on the Nas and delete the one on my internal HD. What kind of trouble i may run into?

I have a back up of the folder 'iTunes Media' on a Nas (LaCie CloudBox).
I do a weekly update.
Everything is cool.
Now I would love to keep the iTunes Mediafolder on the Nas and delete the one on my internal HD.
What kind of trouble I may run into?
Where are the hidden catches?
What can go wrong, and how can i undo any mistake?
I also have an iTunes Match acccount.
Cheers
rudy

HI
Read this user tip Make and keep a backup of your iTunes library, and only stream from the cloud.
Problems? No hidden catches. Whilst streaming using match, you will need a wifi connection. You main worry is that if your NAS drives fails, you need to redownload your music from match but this could take time depending on how large your collection is. Personally I keep an additional backup of all my music as a matter of course.
Jim

How to include external .js file into .ear file using NetBean 5.5.1?

is it possible to include external .js file into .ear file using NetBean 5.5.1? if not, then where should I placed the external .js file and how to write the src="xxx" element? (that is , how to write the path of "xxx"?)
I am using JBOSS 4.2.2 GA as server
thx!!

Even this is also not possible because, the code in that package is developed by DWR and i am just adding it to my lib folder and importing the respective classes. In the same manner i need to include the *.js* file in the JSP.It took me about 3 minutes reading through the [DWR Getting Started|http://getahead.org/dwr/getstarted] page to learn that you don't have to do any of that. Perhaps you should read that page?

How to include a favorit list into a role?

We need to assign a role to some users so that the users can have
a favorit list that is included in the role.
It's easy to include iViews into a role. But I have tried very hard to include
a favorit list into a role without success.
Points guaranteed. Thx.

<u>Portal Favorites is an iView.</u> Open a role in which you want to add Portal Favorites. Then goto <i>PCD->Containt Provided by SAP->End User Containt->Standard Portal Users->iView->com.sap.km.iView.</i> Right click Portal Favorites iview and then Click "Add iView to Role" -> Delta link.
Regards,
Nitin

Is there a way to include a native executable into extension package?

Hello,
I need to call some native code from the CS extension using the NativeProcess API.
Is there any way to distribute a native executable file inside the extension package?
It looks like there is a way to include an "ordinary" file into a hybrid extension, however the file has to be installed into one of pre-defined locations (such as "$applicationsupport").
The problem is that in order to create a NativeProcess object in the extension code, I need to know the exact path of the executable, and I can't seem to find a way to find out where exactly the executable was placed by the extension installer.
Is there a way to install an executable into the extension folder (which I can get using CSXSInterface.getInstance().getSystemPath(APPLICATION))?
Thank you,
Anatoly

Is there a way to install an executable into the extension folder (which I can get using CSXSInterface.getInstance().getSystemPath(APPLICATION))?
Yep, the answer depends on how you're packaging your extension.
If you're using Extension Builder, you just need the executable to be automatically copied to the bin-debug folder during the build process. The simplest way to achieve this is to put the executable underneath the src/ folder. Another option is to make your own resources/ directory and add it to the project source path (see the section "Adding resource folders to the project source path" here: http://help.adobe.com/en_US/Flex/4.0/UsingFlashBuilder/WS6f97d7caa66ef6eb1e63e3d11b6c4ce74 9-7fd8.html). Once you've got it copying to the bin-debug folder you're set, you can launch or export as usual and your executable will end up in the extension folder.
If you're using ucf.jar, just make sure that your executable is in the extension folder you're packaging.
You shouldn't need to create a hybrid extension in order to have a CS extension that uses NativeProcess.

Including a JSP page into a JSF page

Hi !!
I have read some posts here about <f:subwview>. There says to use:
<f:subview>
<jsp:include page="somepage.jsp"/>
</f:subview>But it does not work.
How can i include a jsp page into a JSF page?
Thanks !!!

Hi,
Replace <jsp:include page="somepage.jsp">
with <%@ include file="datasetView.jspf" %>
See thread: http://forum.java.sun.com/thread.jspa?messageID=3413354&#3413354

What solution to include a repititive fragmet into a creator jsf page?

Similar Messages

Maybe you are looking for