What sort of updates were made between Logic 7.0.x --- 7.3.x ?

Hi I was pretty much new to Logic with version 8. I am guessing that before Logic 9 we can expect Logic 8.1 and I was wondering what sort of changes are made for these new sub-updates such as from 7.2 to 7.3 and what sort of things might be changed for 8.1 if there is such a version? I guess the amount of update will be greater than 8.0.0 to 8.0.2
Cheers
Sam

From memory, it went:
7.0.0
7.0.1 (minor bugfixes)
7.1 (some additional features that should have been in 7.0.0 but weren't ready, bugifxes)
7.1.1 (bugfixes)
7.2 (first universal binary version, Apogee support, more small features & enhancements, bugfixes)
7.2.1 (bugfixes)
7.2.2 (bugfixes)
7.2.3 (bugfixes)
Something like that anyway.
7.1, and 7.2 were both paid updates.
Doesn't mean it will be this way for LP8, and until recently I would have guessed that we'd get a 8.1 version at least - probably coinciding with the Snow Leopard release, and taking advantage of those features. However, this might be enough of a major feature update that it won't happen until Logic 9.
But it's all speculation, no ones knows apart from those guys in Hamburg and some other Apple people...

Similar Messages

  • What's the difference between Logic Studio 8 & 9?

    is it me or is the ONLY difference between Logic Studio 8 & 9 the fact the LS9 can run in 64-bit mode?
    I've owned Logic Studio 8 since about a year after it came out. About a year ago I got a Pro that's got Snow Leopard on it, so I installed LS8 on it. My Pro is running in 64-bit mode, but LS8 only runs in 32-bit mode, so I thought I'd "Upgrade" & buy Logic Studio 9 a couple of days ago. I just installed it yesterday & ran it for the first time today. I don't see ANY differce at all between 8 & 9 EXCEPT that Logic Pro & Main Stage both have a 64-bit mode. ALL of the synths & their presets are the same. All of the loops & jam packs look the same. Did I just pay all that $$$ just to get a 64-bit version of what I already had?
    I've tried looking on this site & everything I find is about Logic Pro X. Is there anyone out there that knows enough about this to tell me for sure what the real differences are between Logic Studio 8 & 9?

    Check Wikipedia - of course there are more differences:
    Logic Pro 9
    On July 23, 2009, Logic Pro 9 was announced. A major new feature included "Flex Time", Apple's take on "elastic" audio, which allows audio to be quantized.[5] A version of the pedalboard from GarageBand was included, together with a new virtual guitar amplifier where the modeled components could be combined in different ways. There were also a number of improvements to audio editing, fulfilled user requests such as "bounce in place" and selective track and channel strip import, as well as an expanded content library including one more Jam Pack. Some of the bundled software, including MainStage 2 and Soundtrack Pro 3, was also improved. Logic Pro 9 is Universal Binary, although not officially supported for use on PowerPC computers.[6] SoundDiver, which had been quietly bundled with previous versions, was dropped, eliminating support for arguably the world's most popular synthesizer editor/librarian. As Apple has bundled so many software instruments with Logic, it is not likely that we'll see the return of integration with external synthesizer hardware to the Logic platform.[citation needed]
    On January 12, 2010, Apple released Logic Pro 9.1, an Intel only release, thereby officially discontinuing Logic for the PowerPC platform. Logic Pro 9.1 has the option of running in 64 bit mode, which allows the application to address more memory than in the past. Says Apple "With 64-bit mode, the application memory is not limited to 4GB as with 32-bit applications, so there is essentially no practical limit by today's standards.". Third party plug-ins that are 32 bit are still compatible, but will run from a 'wrapper' inside Logic Pro itself.
    On December 9, 2011, Apple announced that Logic Pro Studio 9 would no longer be available on DVD, and would only be sold via the Mac App Store. The price was reduced from $499 to $199.99 for the Logic Pro app, and $29.99 for MainStage. The download was just over 400mb, and 19gb of optional loops were available as in-app downloads.[7]

  • What new voice over option were made available for the new iPod Shuffle?

    What new voice over option were made available for the new iPod Shuffle in the 10.1.2 update

    But it said that there were voice over update integrated into it but i didn't catch what it was

  • What upgrades were made to CS6 compared to cs5?

    What upgrades were made to CS6 compared to cs5

    shuchi shrivastava wrote:
    There are various new features for Encore apart from the 64 bit support like -
    Additional colors in button highlights : You can now export button highlights with 8 bit indexed colors for blu-ray and full color for webDVD
    Chapter PlayList support for Blu-ray and web DVDs
    DTS HD support for Blu-ray
    Upper Field First support for DVDs
    Additional slides in slideshow
    Various performance improvement features like faster import of images,less time in saving and opening a project
    Also, there are various enhancements done for webDVD as well
    See the link below -
    http://www.adobe.com/products/encore/features._sl_id-contentfilter_sl_ featuredisplaytypes_sl_all.html
    i was in the pre-release program for encore, and all these updates are great.... but my beef for CS6 is still the blasted blu-ray format. adobe REALLY needs to set up a brand new app from the ground up just for blu-ray, or have a different version of encore just for blu-ray. (i would love to see cs7 with full Java capabilities!)  kick the sonic author-core to the curb if that's the problem. i could come up with some pretty complex menus mentally, but it doesnt matter cause i could never actually pull them off when theres that 2 second track gap from asset to assett. its just maddening that i can't do a simple trasitional sequence with dup menus for blu-rays. works flawlessly for DVD though? but not for blu-ray. is that a BD Spec issue that hollywood bypasses by using java? or is it just how encore itself handles the BD table of contents?
    other than that, the only features that really stood out to me were the chapter play-list, DTS-MA, and background processing for HUGE assetts for encore. (no more status bar locking up the app for an hour while you import a single 40gb Blu-Ray timeline. TRULY revolutionary!)
    if only the 2 second track gap could be fixed. =(

  • Download IOS 5.1 what improvements were made?

    I can't find we're the improvements are, what improvements were made for the IPad 2 and IOS 5.1?

    Japanese language support for Siri (availability may be limited during initial rollout)
    Photos can now be deleted from Photo Stream
    Camera shortcut now always visible on Lock Screen for iPhone 4S, iPhone 4, iPhone 3GS and iPod touch (4th generation)
    Camera face detection now highlights all detected faces
    Redesigned Camera app for iPad
    Genius Mixes and Genius playlists for iTunes Match subscribers
    Audio for TV shows and movies on iPad optimized to sound louder and clearer
    Podcast controls for playback speed and a 30 second rewind for iPad
    Updated AT&T network indicator
    Addresses bugs affecting battery life
    Fixes an issue that occasionally caused audio to drop for outgoing calls
    There ya go!

  • What is the difference between logic studio academic version and the normal version ?

    what is the difference between logic studio academic version from the other versions ?

    No difference... the Academic version cannot be upgraded to the next major revision.
    If you had putchased the Logic 9 academic version you get all the updates 9.0, 9.03, 9.1, 9.3...etc
    When Logic 10 rolls around you would have to purchase the application at full price, your version isn't elgible for the upgrade price.
    Same software as the retail version though.
    pancenter-

  • What is the different between Logical complex join and Physical join?

    hi,
    Do somebody know what is the function different between logical complex join in BMM layer and physical join in physical layer?
    Thanks.

    Thank you very much1
    I understand their differentiation:
    In the BMM Complex join (intelligent), means OBI picks the best way from possibly many different ways to join using physical join. FK join forces the same join always, which limits flexibility.

  • I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

    I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

    isthisonetaken wrote:
    I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
    Do you have apps purchased with a differnt AppleID?
    For example, mine shows 12 updates but only 2 show up as being available.
    The others are on my daughters account.
    I log out of my iTunes account and log in with hers and those updates show up.

  • HT201335 OK, so I have the 1st generation iPad.  There is an AirPlay symbol, near the music symbol.  Is this useless? If I enable it, what does it enable?  And, what technological advances were made over the last 2 versions that have made my iPad 1, obsol

    OK, so I have the 1st generation iPad.  There is an AirPlay symbol, near the music symbol.  Is this useless? If I enable it, what does it enable?  And, what technological advances were made over the last 2 versions that have made my iPad 1, obsolete? 
    Thanks for the enlightenment!
    Jeff

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • HT1391 Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    .from iTunes, go to View > Show sidebar
    From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All

  • On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for ios4.3.3 but now the apps don't work at all after updating.  They just flash on the screen but don't stay displayed.  What is going on?

    On several of my apps my iPad 2 w/ IOS 4.3.3 said I needed to update the apps and the updates were for IOS4.3.3 but when the update was complete the apps would no longer work.  They would just flash when I tapped the screen to bring them up but will stay displayed.  What is the problem?

    I Also have this problem!!
    In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason.  At first I thought the screen was dead, but discovered the heat solution by accident.  Now I turn it on and keep it from going to sleep until I go to bed.  Thank goodness the battery is still awesome on this thing.
    I bought it new and still has the original screen, I keep it at home (never below 62 degrees).  Coincidentally, this happened a day or two after the expiration of the warranty!!  Any help figuring this one out would be eternally appreciated.
    iPad mini retina Wi-Fi, iOS 8.1.3

  • HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • TS1389 How do I find what purchases were made from my account?

    How do I find what purchases were made from my account? I have charges on my Credit card and did not make any purchases

    See:
    http://support.apple.com/kb/HT2727
    Regards.

  • What is the difference between logical ROWID and physical ROWID

    hello
    can u please explain the difference between logical ROWID and physical ROWID
    regards,

    from the docs (a 30 sec search)
    Physical rowids store the addresses of rows in ordinary tables (excluding index-organized tables), clustered tables, table partitions and subpartitions, indexes, and index partitions and subpartitions.
    Logical rowids store the addresses of rows in index-organized tables.

  • Updates were installed: Date different

    I have a odd issue, I think.    My updates are getting applied.  but, it shows in the history correctly.  but, the "Updates were installed"  is different.   I have other users that show the same thing.   The "Updates
    were installed"  can be like a month or so later. 
    In this example: it says my updates were installed  6/27/2013,  but my history shown below, shows the correct date  7/15/2013 which is correct.  

    Old post indeed, yet I've hit the same thing recently. I'm using a Powershell script to install updates against a batch of servers, and I've seen that even if all is installed successfully, the "Updates were installed" never gets updated.
    I went ahead and contacted Microsoft Premier Support and the technician there and - after checking with someone who is actually involved with developing the Windows Updates component - he told me that this is by design. What happens is that the date will
    be updated only by Automatic Updates or during an interactive session, and updates processed through other means, such as scripts, don't get to trigger this. The reasoning behind this eludes me (a user can select to install one update only and leave the system
    exposed vs. a script/SCCM patching 100% - the first would be "good" and second "bad" according to this logic).
    I agree that taking a look inside Control Panel and seeing 2012 as the year when "Updates were installed" is a big red flag - especially for an auditor (not to mention the explanations one has to give them for reassurance), but there's always the
    Powershell one liner which will yield when the last update was installed:
    (Get-HotFix | Sort-Object InstalledOn -Descending)[0]

Maybe you are looking for

  • How to make only part of a PDF document editable?

    I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we

  • Can't be used as assignment target

    Hi I take this code and then i get the error message: "my_counter" can't be used as assignment target" Select count(I_ERFASSUNG.ID_ERFASSUNG)into counter from I_ERFASSUNG where ID2_BETRMITTEL like ''||LEITUNG_1|| '';           Message(counter);      

  • How to add the adobe flash tp APEX 3.2

    Hi all, I have a requirement like , i want to take the data from table and show to user as a flash video. How to achieve this?? can anyone suggest me how to do this??? Thanks in advance. Cheers, Shan

  • IPhoto crashes on zooming photo in full screen

    When i blow up a 5 megapixel picture to full size, and drag the navigation window around for a few seconds, iPhoto crashes (always) after showing some display corruption ( horizontal streaked lines (never vertical))and sometimes OSX itself crashes (4

  • ICloud control panel problem

    Hi all, I'm running iCloud control panel on Windows Vista Professional SP2 with only three sync options enabled (Contacts, Calendars & Tasks and Photo Stream), but I have the problem that every time I restart the PC I find the "Photo Stream" checkbox