What t-code do i use to re-open a closed Asset period

Hi,
Need t-code to open a closed asset period.  Hope someone can share his expertise.  I would appreciate a detailed procedure that I can follow. 
Thanks a lot.
< Search forums first. Locked. >

Hi,
Use OAAQ transaction.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71eafd448011d189f00000e81ddfac/frameset.htm
Regards,
Eli

Similar Messages

  • What stub code does APEX uses when making a web service call ?

    What stub code does APEX uses when making a web service call (manual web service reference)
    I am using APEX (which was part of the 11g installation).

    Hi Steve,
    Some options for the same issue:
    web service time out
    How to check for Web Srvice Timeout in ABAP Proxy call
    Regards
    Vijaya

  • Searching data in datastore - what T-code do I use?

    What transaction code in BW is used to search the data in a datastore?
    I want to search the data in a datastore in BW GUI similar to how I would search data in a table using SE16N.
    Thanks.

    DSO -> Manage -> Content -> Active data
    Here u can see DSO table name.. ex /BI0/A(ODS name)00
    U can use SE16 to search from that table

  • What HTML code can I use in Mail (signature box composition)?

    I'm from Spain. It appears that iOS 6 allows to use HTML code in order to compose signatures in Mail. I have tried to use several codes but they don't work... Do you know what HTML tags are accepted by Mail signatures in iOS 6? Thank you.

    you can create a signature in mail preferences->signatures. the editing tools there are very basic but if your company's signature is not too fancy you might be able to recreate it. if that's not good enough, the only way around that i know is a the following hack
    create a dummy signature in mail preferences->signatures. then go to the directory /users/username/library/mail/signatures and locate the webarchive with your signature. then make an html file using your favorite html editor. put whatever you need in it. save it and open it in safari. then save it as a webarchive from safari and overwrite the dummy signature you made with that webarchive.

  • What SAP code can I use to update BILLREL of the Disconnection Object

    I tried to find an SAP delivered code like function module or a method in the BOR object DISCNNECT to update the value of the field BILLREL in the Disconnection Object but could not find it.    Does anybody know any about this?
    We want to avoid using BDC just to update this field in transaction EC86 if we could avoid it so any lead from anybody would be appreciated.

    Hi,
    You can use functin modele ISU_DB_EDCN_UPDATE to update the required field.
    Grant me points if it is useful to you.
    Regards,
    Pranaya

  • Report for what transactions a per has used

    Hi Experts
    Is there any way to write our own report to show the trasnsaction code a person has used between dates or year so that we want to trace what transaction code are mostly used by the users .
    There are hundereds of transaction which will has to refered to give access
    Regards
    Piroz

    Hi gautham chakrav...
    Thanks, I know this transaction but it will not show the between dates , we can run start date and time only
    but I want monthly or weekly transaction run by the users. There is an option go to ST03 .
    I want to know which tables they are storing to write the report
    Regards
    Piroz

  • Report for what transactions a person has used

    Hi Experts
    Is there any way to write our own report to show the trasnsaction code a person has used between dates or year so that we want to trace what transaction code are mostly used by the users .
    There are hundereds of transaction which will has to refered to give access
    Regards
    Piroz

    Hi Peter
    Where is the date range i can see only
    Start date                  read time
    start time
    User
    Transaction
    program
    task type
    now tell me where is the date range is there any setup I have to do to see the date range peter

  • HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

    Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

    Did you partition and format the flash drive first? See the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • What are the key fields used to group double orders in t-code SDD1?

    What are the key fields used to group double orders in t-code SDD1?
    Cheers,
    VT

    Hi,
    You can group the duplicate sales documents with the help of the following fields,
    Sold-To-Party,Document type,date and sales area details.
    Regards,
    Gopal.

  • Lost wifi connection while activation so my installation code is already used... what to do?

    Hey there Adobe people!
    I have a question about my installation code of the Creative Cloud membership. I've bought it  at from a site my school suggests. Later when I received the installation code and download link I began with the activation on my Mac.  After the step where I placed my installation code I had to keep my activation of my membership for a longer time. But then my wifi lost connection. I wanted to refresh the page but then the white squares where empty so I had to fill in my installation code again. But it said the code was already used. So I hope you have a solution for this.
    Thank you in advance!
    Simone

    you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • What is the transaction code for where used list

    hi,  
                    what is the transaction code for where used list and
               how to retrieve the previous delivery quantity and quantity delivered for a particular material  with reference to both material document number and material number.

    hi,
    there is no transaction code for where-used-list..
    its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
    to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
    use tables <b>likp lips and mara</b> and use material number and document number in where condtion.
    regards,
    pankaj singh
    <b>**** please mark all helpful answers</b>

  • What mobile code is used for LiveCycle ES4?

    What mobile code is used for LiveCycle ES4?

    Hi
    SE84 - OBJECT NAVIGATOR
    The Object Navigator is a central point of entry into the ABAP Workbench. It is the successor of the Repository Browser, and you can access it using transaction SE80,SE84 & SE15
    To help you in your work, the Object Navigator provides a comprehensive set of navigation functions.
    Reward Me Points
    By
    Pari

  • I still can't get a redemption code it won't accept my serial number what happened to Adobe it used to be user friendly

    I still can't get a redemption code it won't accept my serial number what happened to Adobe it used to be user friendly

    Bentnote if you are unable to redeem your redemption code then please contact Costco.
    If you were provided a serial number then please register it under your account at http://wwww.adobe.com/.  You can find more details regarding locating and registering your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • What code should I use for iTune gift card?

    Please can anyone help me? By telling me the code I should use for iTune gift cards. Thanks.

    How to redeem a code.
    http://support.apple.com/kb/ht1574

  • What are the simple to use COM library in your java code

    Hi,
    what are the simple to use COM library in your java code

    PhHein wrote:
    [javax/comm|http://java.sun.com/products/javacomm/reference/api/javax/comm/package-summary.html]
    No, he wants to use Windows COM objects!
    @OP
    It's not easy. You can try j-integra or ezjcom, which I tried years ago and was not too happy, but maybe
    they improved or they are just fine for your needs. $$$ involved!
    If you want to do it by yourself, it won't be easy at all, I promise, but it can be done with JNI or JNA.
    If your interactions are very few and simple, maybe some workarounds could be found.

Maybe you are looking for