What to do? Error message  "Could not place the document...." Photoshop CC

I cannot place documents.... "Due to a program error"  What to do?

You have to provide system information and other details like what documents you are trying to place into which, where they are stored, what their color modes are etc.. Even your setup fot the PS memory and swap file could matter...
Mylenium

Similar Messages

  • I'm trying to install a layer style (.asl) in photoshop cc 2014 and I get the error message 'Could not place the document 'filename.asl' because no parser or file format can open the file.' Any suggestions?

    I get the same error when trying the same thing with the default styles, so it's not the file.

    So, if you click on one on of the layer style sets already on the list, such as Text Effects 2, you get the same message?
    Which version of mac os x are you using?
    Did you upgrade your mac os with photoshop cc 2014 already installed?
    Do you have the lastest version of photoshop cc 2014, which should be 2014.2.1
    (listed at the top of Help>System Info from within photoshop)
    Do you see the same layer styles as shown above on your list?
    Have you moved/copied any plugins from an earlier version of photoshop to the photoshop cc 2014 plugins folder?
    The layer styles shown on the list above are the styles that ship with cc 2014 and should be in
    /Applications/Adobe Photoshop CC 2014/Presets/Styles
    (the mac applications folder where all the other mac applications are installed)
    You might try resetting the preferences, but you might need to uninstall photoshop cc 2014 and then reinstall.
    (don't drag the cc 2014 to the trash, but use the Uninstall Adobe Photoshop CC 2014 in the photoshop cc 2014 application folder)
    To reset the preferences
    Press and hold down the Shift+Command+Option keys while starting photoshop cc 2014
    Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
    Press Yes

  • Error - Could not place the document 'IMG_1664.MOV' because no parser...

    I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
    Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
    The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. Can anyone help as Im desperate to try out the new features of CS6 for video editing.
    I am running a 27" iMac with 12gb RAM and 1gb of Video RAM. Any help would be very much appreciated as im at a complete loss and there seems to be very little about this problem on the net at the moment. I am also running Lion if that helps.
    Thanks
    James

    I was getting the same error message when trying to instal a simple brush in CS6 64bit, I saved my work and backed out of the program and opened the regular (i'm guessing 32 bit) program and tried to instal them there. It worked no problem. That would be my suggestion to you to see if it is an error in both formats of CS6 and if it works, it might be something to let adobe know is an error that needs be fixed or at least addressed to the general public as to why it won't work. I beleive you should have received both version with your install. I did anyways.
    Best wishes

  • Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

    Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
    Mylenium

  • Error message"Could not complete the Save command......

    Sometimes when I open Photoshop CS6 (cloud version) and I try to save my work I wil get an error message: "Could not complete the save command because the document is currently being saved in the background. Please try the operation again after the Save Command has finished" Well the background save never finishes and I end up having to restart Photoshop and lose all my work. Any ideas. I am running Windows 7, core i& quad procewssor and 12 gigs of ram.
    Thx

    Hi Chris!
    Yes. I did that after the first time it happened and then it happened again.  Here is my system info:
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 6264 MB
    Memory available to Photoshop: 10996 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: AMD Radeon HD 6800 Series
    Display: 1

  • Firefox suddenly quit working and I get the following error message: Could not initialize the application's security component. The most

    Error message: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write
    restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application
    behaviour when accessing security features.

    See:
    *https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

  • Error message "could not complete the video frames to layers command because dynamiclink is not avai

    So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
    I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6. I've looked everywhere for an answer to this problem so if anyone is able to help me solve this problem I'd be much obliged.

    You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
    After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

  • Error message, "Could not load the installer"

    I have the same problem as a lot of folks on this forum - I need a driver for my Windows Vista so that I can sync with my Palm T5 using my USB cable. I downloaded the suggested 64 bit driver from Aceeca and followed the instructions carefully, including extracting the zip files.  When I start to install it I get an error message that says that Window could not find the installer for that driver and for me to contact my hardware vendor. I thought I was so close, but it was a "no go" (that's military talk).  What am I doing wrong?
    John
    Post relates to: Tungsten T5

    There is no "installer" per se - you have to follow the directions exactly.
    I installed the driver to my Visa 64 laptop, and provided basic instructions in the sticky post at the top of this section. 
    At what part does it fail?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I keep getting the following error message: "Could not initialize the application's security component." Firefox then crashes when I try to enter a secure website. Help?

    The exact error message is: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." I am on a MacBook and have been using Firefox for years without any problem until now.

    Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
    If answer is yes to all of these; contact Facebook.

  • Error Message: Could not Parse the Request

    Hello Experts,
    I am getting the following error in one of my VC models on the portal  when the portal is idle for some time.
    Could not Parse the Request
    I have a timer attached to this model and is set for 30mins.
    Please let me know if anyone has any thoughts on this.
    Thanks,

    Shalom Guy,
    I'm getting  this kind of error "Could not parse request" after 30 min.
    The design like this: I have in the VC model Timer which is fire my event (every 30 min) and executing
    Data Service Web service -> ivies to  -> HTML View.
    Than we deployed VC model into the Portal (VC Model -> iView-> Page)
    I am getting popup of the error as "Could not parse Request" and the model
    is not getting refreshed after 30mins.
    Please let me know if anyone has any thoughts on this.
    Appreciate your help.
    Thanks
    Costa

  • CS4 error message: Could not read the file because the plug-in could not understand the file

    I get the error message in the subject line of this thread when I try to open a AI file in CS4. The file in question is a master plan for a river parkway. It includes a TIF of an aerial image of the project site (created from a SID file) with Illustrator generated linework for the various trails and other master plan features.  Illustrator attempts to open the file, which appears for a brief time but without the aerial image TIF background visible (only the Illustrator linework and text is visible), then this message pops up, I click OK and the file closes and I'm put back at the opening screen.
    I am running Windows 7 Pro (32-bit). My colleague created this file on his computer (same OS and programs as my computer) and he can open it fine. He did have this same issue for a bit, but then ran Updates under the Help menu and this seems to have fixed his problem. Before then, he had been re-starting his computer and having only Illustrator open, and was successful in getting the file to open.
    I ran the updates yesterday and am up to date but the problem persists.
    Any ideas? Thanks.

    Hi Sam,
    This is an issue that has plagued Illustrator CS4 since it's release. The problem is a memory issue. Adobe has never addressed it satisfactorily and likely won't since CS5 has now been released for almost a year now - tho I've read somewhere that CS5 has the same issue. On their site, Adobe has made a few weak mentions about it and has posted a hit-or-miss workaround, but their explanation kinda sounds like B.S., really and it's fairly apparent they're not sure what's going on and likely it's a compound problem and the result of a few different issues. They talk about some bug with color books between Photoshop and Illustrator, but that's DEFINITELY NOT the whole problem.
    Here's a solution, tho it's certainly not perfect and will not always work:
    1. Start a clean instance of Illustrator - DO NOT LOAD ANY FILES EXCEPT YOUR TARGET FILE, and
    DO NOT HAVE RUNNING OR LOAD ANY OTHER FILES DURING THE WORK SESSION.
    2. Find a good free memory manager that will allow you to free up memory with the click of a button, such as CLEANMEM - Google it - it's free.
    3. Free up memory before you start Illustrator and, if the file opens, after you get the file loaded.
    4. While you'll be able to work with the file, save it; manipulate and create new vector objects within the file, likely you will not be able to add additional linked files.
    In the past, the times that I've had this issue have been when working with really large files and large linked graphics - like convention display graphics. The issue just gobbles up, or limits memory allocation. Good Luck!

  • HT201274 I am not able to restore my iphone 3G, After about 70% of the restore i am getting error message could not restore the device

    Dear friends,
    My iphone 3G is not working when I power on the phone I am getting a USB symbol and at top shows itunes. I tried with itunes to restore the and update the software,but about after 70% of the3 reestore amd getting error message couldnot restore the device, due to some error. Is there any solution for this problem. Please help me to solve this problem.
    Thanks,
    Chirackal

    Make sure you switch off anti-virus and firewall, then try again.

  • When i Start Firefox I get the following error message: Could not initiate the application's secutity component. Then I am unable to open any websites.

    It says the mostly likely cause is problems with files in your application's profile directory.

    Hi,
    Please try this: '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''', click '''Open Containing Folder'''. This opens your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]. Exit Firefox and rename '''cert8.db''', '''secmod.db''' and '''key3.db''' in the profile folder. You can delete them later.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]

  • Error Message: could not use the quick selection because of a program error

    Anybody know why this is happening since the latest CC update? Or how to work-around?

    Please read these and proceed accordingly:
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325

Maybe you are looking for