What to do for sucesful installation of 10g on AIX 6.1

Hi.. I have to install oracle 10g on AIX6.1
I have found that oracle 10.2.0.3 start supporting AIX6.1 , but it is a patch and must be installed over base version 10.2.0.1.
So i want to ask should i create database while installing oracle 10.2.0.1 or I should not create database while installing 10.2.0.1 instead first i should install 10.2.0.1(skipping creating database) then upgrade to 10.2.0.3 and then run dbca for creating database. Please tell me the correct way...

user8872529 wrote:
while i am trying to install oracle 10.2.0.1 it is giving me linking error ...
but it give this error which can be ignored..In fact i ignored it and it run all the linking steps but many of them was showing error.. so does it give error because AIX6.1 is not supported.. or there is some problem really..
please help me ...It's impossible to say without knowing what the errors were. I think all of the crystal balls are down at the moment.
When you ask for help regarding an error, it's much better to actually provide the exact error code and message. Anything less is the equivelent of sayng "My car doesn't start. What's wrong with it"
Did you read the installation guide and follow the prerequisites? Particularly the parts about 'required packages' and 'required kernel parameters'?
Edited by: EdStevens on Feb 15, 2010 9:36 AM

Similar Messages

I can't get install OS X Mavericks on my MaCbook AIR. During the stage " installing OS X on Machintosh HD..", the computer keeps resseting successivelly and the installation never completes. What the solution for the installation to finish successfully?

OS X install

When you download Mavericks to the USB drive it's not going to allow you to run the Mavericks installer. You need to buy an external drive then install Mavericks on the drive. You can then boot from the drive to recover your data and install a working OS X on the internal drive.
Recommended Drives
USB 3.0 drives work on USB 2.0 but you do get 2.0 speed. They are cheaper because they are popular PC drives. If you get a new computer you'll get the bump to 3.0 speed. I don’t recommend FW. The newer computers don’t have FW ports. You would need a connector in order to use the drive on a newer computer.
Size: I recommend either the 2T or 3T drives. Often they are cheaper than a 1T drive. The 4T drives have more issues and failure rates.
The Seagate USB 3.0 Backup plus drives come formatted for PC but easy to format in Disk Utility.
Seagate Backup Plus 2TB Desktop External Hard Drive USB 3.0 (STCA2000100) (Amazon only had used drives so I couldn’t get a price)
Seagate Backup Plus 3TB Desktop External Hard Drive USB 3.0 (STCA3000101) $134.99
This Western Digital drive has good reviews: Has a 2 yr warranty. Comes formatted for Mac but I would still format using Disk Utility.
WD My Book Hard Drive for Mac 2 TB (WDBYCC0020HBK-NESN) $99
WD My Book Hard Drive for Mac 3 TB (WDBYCC0030HBK-NESN) $119.99
Check the warranty when comparing. The longer the warranty the better the drive. WD makes cheaper drives but with almost no warranty.
Locally, Best Buy seems to have the best prices.
You can get one drive for both Time Machine and clone, but it’s recommended that you use different drives for each. If the drive dies you lose both types of backup.

APEX2.0 on 9i not working anymore after installation of 10G database

Hello,
Up to last saturday I used APEX 2.0 on my 9i database (on Windows XP) without problems. I have several applications running and used them saturday for the last time.
Saturday I installed Oracle 10G Enterprise Edition on that same machine. I installed ONLY the software for the RDBMS, not even APEX. Later on I created my first 10g database via DBCA. Notice that I didn't do anything with APEX on that 10g database yet. I only installed the RDBMS software in a 10g home directory and created a database. That's all. No apex installed, nothing from the companion CD, only the RDBMS software in its own home.
Yesterday however, after a reboot of the machine, I could not use my applications running on the 9i database anymore: "the page cannot be found".
HELP!!!
What was changed by the installation of 10g that now causes that my applications cannot be accessed anymore? The 9i database runs OK, so that's not the problem.
I did already change the PATH settings, so that the 9i paths are checked before the 10.2 paths, but that did not solve the problem.
Has the installation changed something in the registry of XP perhaps?
Best regards,
Jan.
Best regards,
Jan.

Hi all, in answer to the above suggestions:
No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
Does anybody have other suggestions? Please help.
Thanks in advance,
Jan.

Installations of 10G database for Demantra

Hi
I am trying to install 10g client database for demantra installations. I am not a DBA, but funtional person.
I am getting various error. Is there a way to get some help on installations of database and demantra for self study?
The error is as follows:
The selected Oracle Client is mising the crucial utility (ies) utility
Shah
Edited by: user11991871 on Feb 9, 2010 8:32 AM

I don't know what you posted but it is not an Oracle error message. It may be part of one but not the entire message.
If you want help you need to provide enough information for us to know what you were doing, on what hardware and operating system, with what Oracle software, etc.

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

Looking for what software required for Enterprise Manager Installation

Hi All,
I am fairly new in working with Enterprise Manager, Previously used 11g Database Control, but never install Enterprise Manager (OEM). Now due to the increase in databases, I am considering to install OEM (Oracle Enterprise Manager) to list all database (from over 20 Linux severs) to one location.
I have read documentation and still confused on what should be installed for OEM. I am planning to use OEM 12c Release (12.1.0.4), my current databases are 11gR2 (11.2.0.4 ).
Could you tell what I need from below list?
OEM (12.1.0.4)
Web Logic server (Do I need that separately, or will this be installed with OEM?)
OEM Agent on all other 20 servers (do I need to install separate software on them? Please guide)
Any specific version of Java.
Please guide me if I need any other software or plugin.
I have already installed oracle software and have created a database by using “Custom” option in DBCA. My server OS is Linux 64 Bit for Enterprise Manager.
Thanks in Advance.

Hi,
You would need 12c OEM cloud control software , Database software(For creating repository) and agent software (For monitoring targets on other hosts)
Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11g Release 1 (10.3.6) are installed by default with the 12c OMS installation although you do have a option of installing it separately if you want but Oracle strongly recommends using the 12c installation process to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12c.
Below is the link for Enterprise Manager Cloud Control 12c Architecture
http://docs.oracle.com/cd/E24628_01/doc.121/e25353/overview.htm#EMCON112
For 12c OMS installation steps refer to
http://docs.oracle.com/cd/E24628_01/install.121/e22624/toc.htm
EM 12c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using GUI Mode (Doc ID 1488154.1)
For agent installation refer to
Installing Management Agents Using Add Host Targets Wizard or EM CLI
http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC181
Installing agents using other methods
http://docs.oracle.com/cd/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323
To download 12c software
http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
Regards,
Rahul

Adobe won't accept my System Admin Password for an installation, what to do?

Adobe won't accept my System Admin Password for an installation, what to do? This password has been used for years and years and has never failed. Something in the communication to Adobe for an installation (Bridge CC) failed but they offer no suggested alternate action. Thanks to everyone.

attach a screenshot of the password prompt, http://forums.adobe.com/message/4209263#4209263

I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

What databse I have to install for SOA11g installation on Windows platform

Hi,
I want to install SOA11g on my Windows laptop. I have installed 10g XE (10.2.0.1) database. But when I tried to create the Dehyderation store using RCU tool, the error I got is like, the datasbase version will not support for this installation, however its asking to upgrade it to 10.2.0.4 version. But I didn't find any patch for XE database on windows to upgrade to the required version.
I also tried to install the 11g enterprise database, but I am not able to succede. There I have faced one issue, that using RCU tool I am not able to connect the database as a SYSDBA. So I have dropped this DB and shifted to XE. Now I have stuck with XE version problem.
Is there anybody who installed the SOA11g on the windows platform per personal usage? If so please guide me.
-- Khaleel

Hi,
I have followed the steps in http://sriki77.blogspot.com/2008/11/oracle-xe-processes-parameter.html
Changed as follows:
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 26 21:07:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> show parameter processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 40
SQL> alter system set processes=500 scope=spfile
2 ;
System altered.
SQL> show parameter processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 40
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 167773580 bytes
Database Buffers 427819008 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
SQL> show parameters processes
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 4
log_archive_max_processes integer 2
processes integer 500
SQL>
After this I got some more errors , I have ignored them aswell. (One I remembered is open_cursors limit was 300 suppose to be 500).
Finally I have created the entire schemas except the PORTAL CONFIGURATION everything is successful.
Thank you.
-- Khaleel

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

Whats is the Best platform for CiscoWorks installation.

Hello,
Please advise whats the best platform for CiscoWorks installation. We are currently using the windows 2003 32-bit and CiscoWorks is slow.
We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1
THANKS

We are using 2008 R2 for LMS 4.0.1 - runs great - need loads of RAM and page file but we have not had many challenges. Java seems to run away with memory at times and we cycle out the services but it runs great.

What is JCMRS installation in CRM?what is procedure for that

what is JCMRS installation in CRM?what is procedure for that

Hi,
I think it is JCRM NOT JCMR, JCRM is the Java component for CRM Installation.Typically this will be required for ecommerce scenarios e.g IPC (Internet Pricing and Configuration)in Internet Sales.

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Installation: Oracle 10g on SUSE Linux 10.1

Can this be? I sat for hours preparing my all new clean SUSE Linux 10.1 server for the installation of Oracle 10g (Standard Edition)... and when running the installer it simply tells me that SUSE 9 is needed...
I've found others here in the forum having experienced the same.
Maybe I just downloaded the wrong version of Oracle?
The main download page is at:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
I selected entry "Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86" (the one directly below the Windows version):
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html
The size of the file^^ is 668,734,007 bytes.
Or should i have downloaded entry "Oracle Database 10g Release 2 (10.2.0.2) for z/Linux":
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10202zlinuxsoft.html
The size of the file^^ is 838,518,746 bytes.
By the way, all these versions on the main page should have some kind of description, something like "This is the Linux Version for most standard 32Bit single and multiprocessor Intel compatible servers."
Well, since I'm completely stuck now with SUSE 10.1, is there any way to make the Oracle installer go on that SUSE version? Maybe SUSE can pretend to be version 9... but how do I achieve something freaky as this?
Thanks for any help, comments, suggestions...
Karsten

BTW, I think it's bad practice by Oracle not supporting SUSE 10.1.Actually, I think it is good practise for Oracle not to certify the public beta versions of an operating system.
Please remember that Fedora and SuSE Linux are cycled every 6-8 months, making then truly unstable for commercial purposes. IN addition, they are often desupported by the comminuty within 2-3 years, forcing upgrades. And finally, Both Red Hat and SuSE/Novell publically state that these are 'proving grounds for new features' (meaning they are beta).
Certification means that Oracle will invest heavily and train people on the specific operating system and work with the operating system supplier, 24x7 if needed, to make sure that customers will continue in production. I am not aware that the SuSE Linux or Fedora supporters are willing to put in 24x7 support they way the Red Hat and SuSE Enterprise groups are.
This does not imply the public OSs are bad. It just means that Oracle (and I) believe they are unsuited for commercial, business mission critical, immediate support required, environments.
By the way, I have the combination of Oracle10g and SuSE Linux 10.1 working, and it works well. However, I did need to make sure that the libraries to which Oracle10g was compiled are available in the OS.
Or maybe Sybase does better.... ;-pNot if the [glibc] libraries are incompatible. Nor does PostgreSQL nor MySQL.

What to do for sucesful installation of 10g on AIX 6.1

Similar Messages

Maybe you are looking for