What to fill in the parameter fields of schema

Hi All,
Schema will have 4 parameters (Par1, par2, par3 & Par4), my dount is what to fill in these fields?
For Example: only PCR should be given in Par1.... etc etc.
I just know it depends on the function what we are using in Schema, but I'm NOT sure of what should be exactly filled in that par1?, par2?, par3? and par4? fields.
Pl advice.
Thanks in Advance.
Regards,
Venkatesh

Hi,
the refers topic:
Re: Function of Parameters within a Schema
Further functions used to edit wage types stored in internal tables are PLRT, PORT,
PDT, PRT, and PZL. The personnel calculation rules are accessed using the same
parameters as function PIT.
In parameter 2, you enter the type of rule access. The wage types to be processed can
be specified using processing classes (Pnn). The rule can be accessed generically
(GEN); that is, all the wage types in the table are processed in the payroll rule. If
parameter 2 is empty, the personnel calculation rule is accessed for the wage type
being processed.
If you have not differentiated employee subgroup groupings in a customer personnel
calculation rule, you must call the rule using NOAB in parameter 3.
hope it is helpful to you
Olivia Yang

Similar Messages

How to edit the dropdown emails list created as you start to fill in the To: field?

When compose a new message, via iCloud (safari browser and win 7 os), and start to fill in the To: field, a dropdown list of Email addresses appears. Some are old email addresses that have been deleted from the iCloud Contacts. How do I clean this up? Thx

Hey Bubu,
Thanks for the quick reply,
open xml SDK ... I don't know what that is but I don't think it has to be so complicated:
IF it is a Document type and NOT a Document Type Set, then I can specify the template to use and even edit it afterwards.
The problem with the Document Type Set is that it won't allow me to make changes to the files I specified when creating the set. I wonder where they are kept and how these docs can be edited.
I don't think i need new software,
And I don't think i need to start writting code to achieve this simplest of tasks.
Can you elaborate a bit what xml SDK is and why I need it? what is Del Content of a document?
Kind regards

Print just what is typed in the text field without printing the text fields

Hello,
I'm trying to print a form after I filled in the text fields, but would like it to print just what I typed in the field, not the text field and the color in the text field. I use CS3.
Any help would be appreciated!

Hello Teddy and wellcome to the group!
If you want to change fonts or other things then you might need to use the PrePrint method. What I normally do is select PrePrint from the "Show" section in the Script Editor (If you do not have it go to the toolbar at the top, Windows, and select Script Editor). After you select PrePrint you can now either type the name of the subform and field you want to change (or you can put your cursor in the Scripting Dialog box, hold CTRL and then select the field with your mouse) and then type in the JS to change the font. it is something like TextField1.fillcolor = "255, 255, 255"; (that changes the background fill to white). You can also replace fillcolor with font or border to change the color of the font or the border. I put a link to an Adobe website that goes over JS color changes below. You just need to add a PrePrint method for each field that you wish to remove the necessary highlighting on. Then once the user either hits a Print button that you have on the form or uses CTRL+P to print the form it will remove any highlighting.
Now On the Text Field not printing itself that I am not sure what you are asking for. Are you asking for the caption not to print or for there not to be a box around the data that is entered? If you do not want to have a box surround the text field that is in the Object section of the field (see image below). You just need to select None if you just want the text. If you want to change that with JS I put another link below that has the code to change the border color to white and the user cannot see it. If you do not want the caption to print the only method is to delete the caption from the text field and replace it with static text that can be hidden, but I am assuming that is not what you are talking about (correct me if I am wrong though).
http://partners.adobe.com/public/developer/en/livecycle/designer/pdfs/ChangingFieldAndSubf ormBGColors.pdf
https://forums.adobe.com/thread/1409617

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

Issue with fill in the blank field and back button.

I am working in CP4 AS2. I have create a page of fill in the blank fields to simulate filling in a form. On the next slide, I show the answers by extracting the variables into text boxes. I have a back and a next button and instruct the user to review their answers and if incorrect, to select the back button in order to reenter the data. I have the back button set to jump to the previous slide by number (i've tried previous, last slide, etc...)
The flash movie freezes when I select the back button. I think flash is having trouble going back to the fill in the blank fields from the displayed variables. Any ideas? or work arounds for this. The idea solution would take them back to the page with the data already in the fields so they could correct the errors only and then return to the review page.
Thanks
Scott

Hi there
Is scoring enabled on these? If so, perhaps your quiz settings are preventing backward movement.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

The types of the parameter field and parameter field current values are not compatible.----

HI,
I am attempting to set report parameters in my .jsp code via URL parameters.
I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
The parameter on the report is a String Type, named for this example p1.
The value that p1 represents is LERAD
My code:
String stringValue = request.getParameter("p1");
CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
returns the above mentioned error.
I have tried:
String stringValue = (String)request.getParameter("p1");
which returns the above error
And;
String stringValue = new String(request.getParameter("p1")).toString();
which returns
java.lang.NullPointerException
java.lang.String.<init>(Unknown Source)
org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
Any ideas???

Hi,
nevermind.
case sensitivty strikes again.
my URL param was P1 ( case sensitive)

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

At least one required field was empty on export. Please fill in the required fields (highlighted)

"At least one required field was empty on export. Please fill in the required fields (highlighted)"
I'm tearing my hair out with this one. Have checked all the fields to confirm if I had set the Type as User Entered - Required. Can't find any such field. Any help would be appreciated. Is there an email id where I can send the form?

Hi,
In your script when you make an object visible, you also make it mandatory. No problem there!
However the script that hides the object goes through this sequence:
hide the object, THEN
make it optional/not mandatory.
This is where the problem lies.
You FIRST need to make the object optional/not mandatory AND THEN hide the object. It should just be a simple case of work through the various scripts and having the mandatory line before the presence line.
There is an example here: http://assure.ly/hxHupW.
Hope that helps,
Niall

I would like to fill up the following pages. If I fill up the first fields with some letters, they m

I would like to fill up the following pages. If I fill up the first fields with some letters, they multiplay each other in several other fields, there I don't want them. Can you help me?

You can't change that, and we can't either. It's an error in the creation of the form. ALL of the fields that "auto populate" have the same name and description, so when you fill one, the rest fill by default with the same info. You'll need to contact the author of the form and inform them of the error.

What program/plugin can i use to calculate and fill in the BPM field in Itunes automatically?

I have tried a few and need a automatic one as i have a few thousand songs to process.
Also a freeware one would be pure mad dead brilliant.
Many Thanks

Hi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki

Get the parameter fields defined in crystal report

I am porting my application from crystal 8.5 written in C++ to crystal 2008 in .net.
Here I am not making use of crystal report viewer neither I am creating .rpt in .net code.
I have a set of already created .rpt files.
I have written a function in .net to export the crystal report.
Its a generic function and will be called for multiple crystal reports.
I am passing the parameter values to the report by making use of the following function :
     ReportDocument repDoc;
     repDoc.SetParameterValue(APPTYPE, strNextToken[0]);
     repDoc.SetParameterValue(COMPORROLETYPE, strNextToken[1]);
Similarly I are setting other parameter values.
The problem here is that, all the reports do not have parameter fields defined that I am trying to set.
They may be present for one report and absent for another. In this case , if the report does not have a particular parameter
field, then it gives error on setting parameters and subsequently fails.
Now I want to find out through code what all parameter fields are defined in the report. Then I will only set those
parameter fields?
Please guide how can this be done.
Thanks
Sonam

Not as trivial as you might think. You will have to loop through all the sections of the report looking for the objects you need. I don't have a code specific to parameters, but looping through al the sections would be something like the code below. But... this will only show you parameters in a section. It will not show you parameters used in a formula, record selection formula, group selection formula, text field or a conditional formula. In order to get those parameters, you's have to parse out each of those objects looking for parameters. And this is probably not an exhaustive list of places to look for a parameter in the report. I get a headache just thinking about this...
Dim crSections As Sections
Dim crSection As Section
Dim crSubreportObject As SubreportObject
'set the crSections object to the current report's sections
crSections = crReportDocument.ReportDefinition.Sections
'loop through all the sections to find all the report objects
For Each crSection In crSections
crReportObjects = crSection.ReportObjects
'loop through all the report objects to find all the subreports
For Each crReportObject In crReportObjects
If crReportObject.Kind = ReportObjectKind.SubreportObject Then
'you will need to typecast the reportobject to a subreport
'object once you find it (***you'd go to setting the parameter here - or not...)
crSubreportObject = CType(crReportObject, SubreportObject)
'open the subreport object
crSubreportDocument = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
'set the database and tables objects to work with the subreport
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

What and Which are the Mandatory fields in a Purchase Order?

Please advise how I can check what the Mandatory fields are in a purchase order and which fields are not Mandatory ?
Also, Please advise where this information can be found in the manual?
Thanks in advance.
Edited by: Darpal Thiarha on Feb 26, 2008 3:49 PM

Hi,
mandatory fields are:
vendor
docdate
delivery date
and other fields you may test in sbo_transactionnotification procedure.
I don`t think that this is written in manual, you have to test to add the document with few fields filled and check it.
Petr

Address Book contact preview shows a different date than what is input in the birthday field.

When opening the address book and clicking on an entry, the preview pane at the bottom shows a different date than the date that is entered in the birthday field. It shows the day before the actual date that is entered. See images below:
Thanks!

Thunderbird numbering is based on the Extended Support Releases, which are provided every seven "regular" cycles (thus after 7 6-week cycles = every 42 weeks) to minimize fallout from new features hitting the releases to frequently. Initially, those release were issued to organizations only which require some kind of internal review or certification of software prior to deployment.
Currently we are in the "37.0" cycle and 38 beta 1 has just been released (but doesn't have the fix yet). Meaning, the next release after 31.6.0 won't be 31.7.0 but 38.0 already, followed by 38.1.0 up to 38.6.0, the continuing with 45.0, etc.
Confusing, yes, but that's what they came up with.

What do I use the "webapi" field for?

When I choose "start point" I get an entry list with available fields in the data provider. What can I use the field "webapi" for?

The Web API field is used to use functionality from a BW system, the so called Command URL (aka Web API):
http://help.sap.com/saphelp_nw04/helpdata/en/b4/0fa239cec06b40e10000000a11402f/content.htm
This functionality is deprecated in BI 7.0 (NW 04s), but can still be used. E.g. in such an example:
How To Model SAP BI Hierarchies in Visual Composer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4155b345-0a01-0010-ac9f-b3b2c34e993c

What to fill in the parameter fields of schema

Similar Messages

Maybe you are looking for