What will be the form of file protocol (file://) in firefox?? Using file://servername/foldername , I am uable to open a folder. But it was supporting in other browsers. Need a prompt solution of that issue.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/918107]]</blockquote>
what will be the form of file protocol (file://) in firefox?? Using file://servername/foldername , I am uable to open a folder. But it was supporting in other browsers. Need a prompt solution of that issue.
I have used following code snippets:
<a href="file://PC2/c$">open folder </a>
It is used to open C:/. But it is not working in other browser except Mozilla.
Need a solution as soon as possible...

Hi,
Please try '''file://///servername/sharename/''' or '''\\servername\sharename'''

Similar Messages

If you have two public class in a java file what will be the error ?

Q:If you have two public class in a java file what will be the error and how will you remove that.?

Kannan_S wrote:
I dont want you to be on that list . Here goes my explanation..
A class is well defined with members and functions
An abstract class is not defined well as compared to a full fledged class (talking more generically)
An interface is more abstract.
I was asking the author who has posted this question to be like a class(very clear)
and not either as an abstract class or an interface
Hope i have made it clear..Not in the slightest. This has absolutely no bearing whatsoever on the question asked. Not to mention that classes are classes, and all equal in the eyes of the compiler, be they abstract, concrete or interfaces. It's difficult to see what your point is, to be honest, but I suspect it wouldn't be worth seeing anyway

HT5624 my child created a passcode for my i phone and he forgot that what will be the reset procedure

my child created a passcode for my i phone and he forgot that what will be the reset procedure

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

The form field arguments.image did not contain a file.

Hi there,
I'm getting a strange error with a simple file upload and I
can't figure it out for the life of me. It's odd, because old code
I have written before has worked fine in this area, and I really
honestly can't see where I am going wrong.
First the error:
The form field arguments.image did not contain a file.
The error occurred in
C:\ColdFusion8\wwwroot\red_roof_rentals\components\query.cfc: line
37
35 :
36 : 
37 : <cffile action="upload"
accept="image/jpg,image/jpeg,image/gif" filefield="arguments.image"
nameconflict="overwrite"
destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
38 : <cfset variables.image = "#file.ServerFile#" />
39 : <cfset variables.thumb = "thumb_#file.ServerFile#"
/>
I have researched this and found other people have had the
same problem - although please be aware that I do not beleive this
to be an issue with whatever version of CF I am running. I have
still not found an answer.
I have one template with my form called
"admin_create_property.cfm". When the form posts it invokes a CFC
method that uploads the file and inserts stuff into the database.
However, it dies at the file upload part with that bizzarre error.
There are only two files working in this:
admin_create_property.cfm
query.cfc
I will write the code out for these so you can see. Please
see attached code. Please note that I have taken out as much
irrelevant code as possible (html, doctypes etc etc).
Any help with this would be greatly appreciated as I am
absolutley stumped to be quite honest. I've heard people say it
could be any of the following:
1 - Need to use enctype="multipart/form-data" - which I DO
2 - cffile filefield can't contain ## - which it DOESN'T
3 - Inut type must be file - which it clearly is.
Please please help, I feel stupid asking about this but I
need you guys more than ever!
Kind regards and thanks in advance,
Mikey.

I don't get what you mean as this is what I am doing.
<cfinvokeargument name="image" value="#form.image#" />
This takes the value of the image file field and passes it to
the CFC as an argument.
Am I doing something wrong with this? Sorry for my
stupidness!
Thanks for you help, further assistance would be greatly
appreciated.
EDIT: Interestingly enough, if I just use the tag on my
"admin_create_property.cfm" page instead of using the CFC method
like this...
<cffile action="upload"
accept="image/jpg,image/jpeg,image/gif" filefield="form.image"
nameconflict="overwrite"
destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
It seems to upload the image just fine. Why then would this
not work if all I am doing is simply passing to the CFC the value
of the "form.image" as an argument so that the file upload can
happen in my CFC instead of in the calling template??!
It's really bizzarre.
Mikey.

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

What will be the consequences of changing the apple ID on my iPad to a different apple ID on my iMac?

Hi,
I have an (iPad 2) and an iMac (2012). I have one apple ID used for both the itunes and appstore on the iPad, and on the iMac a different apple ID used for the appstore and itunes. What will be the consequences of changing my email ID on the ipad to the one used on the imac? I don't want to delete the iPad apple ID, just never use it again. I just want to work with 1 apple ID over the 2 devices.
I have purchased apps on the iPad and other documents/movies/books etc and if I sync to the iMac will all that be deleted? How can I just use the one apple ID for all? Does it mean that every time I connect my iPad to the iMac that I have to login to itunes using the iPad apple ID? Maybe it is that simple I don't know.
What will be the consequences of doing this and is it possible?
Thanks.

settings->itunes & app stores->click appleID and choose logout

HT4597 what will be the new alternatives for iWeb publishing, Idisk & photo gallery ?

what will be the new alternatives for iWeb publishing, Idisk & photo gallery ?

Thanks for the reply that there will be 3rd party support.
One of the main reasons why I went from PC to Mac was because of all these cool features.
Am dissapointed to see them leave. ( Iweb, Photogallery, Idisk... )

If BW system is down for several hours, what will be the status of the Jobs

Hello Gurus,
   I don't know where i should post this issues! anyways .....! i need some information. One of our BW production system will be down for about 12 hours tomarrow to move it on to new hardware and this current system has lots of scheduled jobs with run daily and hourly..! so my question is ..what will be the status of this jobs which fall in between this down time?
     as per our basis team information....they said that all these jobs will be queued up and when once the system is online ...these jobs will access all the avalable processess and if this thing happen....! then the system will have a VERY BAD performance and user cannot use this BW system...they cannot even open the bex analyzer.
      so...i thought of deleting these queued jobs. can any one tell me WILL THESE JOBS WILL BE SCHEDULED FOR NEXT DAY??? OR IS THERE ANY OTHER WHY TO CONTROL THIS SITUATION?? our process chains are locked for modification..so, we cannot even re-schedule them in prod system.....
         aaaaaah! can any one HELPP MEEEEE@
I will award full points for your suggestion

Hi,
when you'll restart you SAP system all jobs will be displayed with a delay since they didn't run during your downtime.
And that's true that they will be queued and fired as soon as a system resource will be available. That means a lot of paralel processes with system overload and usually subsequent errors in loading data.
As per suggested already, the best would be to shift the scheduling.
Another option is to execute the report BTCTRNS1 before shutting the system down. This will change all background job status to a "suspended" mode.
when your system is up again you will be able to release (or reschedule or cancel or any other action) single jobs in a controlled manner.
When you've finished with this task then don't forget to run BTCTRNS2 in order to enable background jobs to be executed.
hope that helps...
Olivier.

What will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports

what will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports. I also want to know the tables involved

Hi Andrew,
Part A:
I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
Field List:
Priority: Popup menu with six items: 00, J, D, 1, 2, 3 Defaults to 00
TL (time limit in months): Calculation: CHOOSE('Priority',0,1,3,4,6,12)
Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
Target Date: Calculation:
DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
Remaining (Days): Calculation: INT('Target Date'+1-NOW()) (see revision below)
Completed: Checkbox. Set default value to Unchecked.
Completed Date: Date: Entered manually
OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
Rsults (and some further formatting of the Layout) below.
Part B:
You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
Regards,
Barry

What will be the result?----No.141

You decide to change the location of flash recovery area. You excecute the following command: ALTER SYSTEM SET DB_RECOVERY_FILE_DEST='+DISK1' SCOPE=BOTH SID='＊';
What will be the result?

scope= both means that changes the parameter value in currently running instance and as well as the spfile.

What will be the price of the "Photoshop Photography Program" after the "limited time" is ended?

The information currently available is "For a limited time, you can join a special Creative Cloud plan"... And it's just US $9.99/month when you sign up for a one-year plan.
I understand that Adobe will not announce in advance price increases but that's different; it's advertised as a limited time offer so we know it's not the regular price.
We need to know what will be the regular price as it will be a recurring fee.
I now own a regular licence of Lightroom 5. If I sign up for the CC version It's almost a one way road, there's no return and I will be at Adobe's mercy.

mgibeault001 wrote:
With all respect, I cannot quite base my business choices on your understanding... I need a definitive answer.
I don't think you'll get one. Do other software companies offer long-term future price information?
mgibeault001 wrote:
Since they advertise this as a "limited offer" (ending end of May), my understanding is that it can be priced at $49 (or any other price) a month after that.
I've told you what I've read, but that wasn't a guarantee, so I guess they could put the renewal price up by 500% at the end of your year's contract.
mgibeault001 wrote:
And there's no assurance that upgrades to LR perpetual will be available in the future. We would be locked in CC because our current LR5 will not be able to read LR6' catalog.
Yes, quite true. They've said that Lightroom including new versions will be available for perpetual licence for the forseeable future (or some similar words), but maybe Adobe can forsee only 6 months.
Do you have an alternative? Do you have long-term guaranteed product and pricing strategies from other suppliers?
PS - what is clear is that new products are likely to be CC-only. For example, Lightroom Mobile is CC-only.

What will be the immediate behavior of server once the model, msdb, tempdbs are corrupted?

Hi,
Can someone help me to get the below information.
What will be the immediate behavior of server once the model, msdb, tempdbs are corrupted?

Can someone help me to get the below information.
What will be the immediate behavior of server once the model, msdb, tempdbs are corrupted?
If any of Model or Tempdb is corrupted SQL Server would not come online.
Tempdb is created from copy of model database so if model is corrupted tempdb wont be created and tempdb is not created SQL Server cannot come online.
SQL Server can come online is msdb is corrupt but jobs and packages wont be accessible.
There are various trace flag which can help you to bring Database *kind of online* if model or tempdb is corrupted
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

What will be the movement type when goods are returned from customers

what will be the movement type when goods are returned from customers

Hello Ravinder,
Please see the following description in the SAP Library
(http://help.sap.com) under the path:
Materials Management (MM)
-> Inventory Management (MM-IM)
    -> Inventory Management and Physical Inventory (MM-IM)
       -> Goods Receipt
          -> Other Goods Receipts
             -> Entering a Customer Return
" Entering a Customer Return
Since returns from the customer are usually examined, the quantity
returned is first posted to blocked stock returns. As is the case with
goods receipt blocked stock, blocked stock returns are neither valuated
nor do they count as unrestricted-use stock.
If an examination proves that the returned quantity should be taken over
into unrestricted-use stock, you enter the transfer to unrestricted-use
stock in a second step. It is at that time that the valuation of the
goods receipt occurs.
Depending on how Customizing for Sales is configured (the movement type
configured in the step Define Schedule Line Category), the delivery is
posted to the following stock:
- Blocked stock returns (non-valuated, not unrestricted-use) (movement
type 651)
- Unrestricted-use stock (movement type 653)
- Quality inspection stock (movement type 655)
- Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can
make a manual goods movement posting in the Inventory Management
component to transfer the quantity to valuated stock.
If blocked stock returns are to be transferred into your company's own
stock, you enter the transfer as a transfer posting. Choose movement
type 453 (to unrestricted-use stock), 457 (to stock in quality
inspection stock), or 459 (to blocked stock). "
Hope this helps!
Regards,
Shanthala Kudva.

HT204380 How can I make a face time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

How can I make a Face Time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

FaceTime is free to use. You will not be charged for using FaceTime.

Iphone 5 Battery efficiency is bad.....What will be the cost of replacing a battery in the apple store..??

what will be the cost of replacing a battery in the apple store..??

Apple has a battery replacement program for some devices sold between Dec 12 and Jan 13.
Check your device if it's eligible for this program or not https://www.apple.com/support/iphone5-battery/other_countries.html
Besides, go to any App Store and ask them to run ADR test for your device and will see the battery life. If it seems fail or consumed then you should replace the battery. If seems pass, then restore your device if you think battery drains too fast.
see the pricing Apple - Support - Service Answer Center
choose the country from list and will see the all info upon service costs

What will be the form of file protocol (file://) in firefox?? Using file://servername/foldername , I am uable to open a folder. But it was supporting in other browsers. Need a prompt solution of that issue.

Similar Messages

Maybe you are looking for