Whats the datatype for the time in the format mm:ss.ms

Hello Sir,
I wanted to create a table with a field called time.
what should be the datatype for this field contains the value as in the format mm:ss.ms(04:53.0).
waiting for ur reply.
regards
pannar

Actually, i need to read some time values from excel sheet and store them into a table. it should contains the field time with the value something like
(05:21.1) ie mm:ss.ms).
if i put varchar2, i will be in trouble at the time of querying the table with some condition like fetch the records only the time duration less than 3 mins or something like that!
in this case, what data type finally fits to do this?

Similar Messages

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products

Hi I bought a new iPhone 4 with iOS 6.1.3 installed. When I connected it to itunes for the first time to activate it iTunes asked me to enter the password for an account that the iPhone is locked with what shall I do? PLease help

Hello everybody
I bought a new iPhone 4 with iOS 6.1.3 installed. When I connected it to itunes for the first time to activate it iTunes asked me to enter the password for an account that the iPhone is locked to like if the device was used before what shall I do? PLease reply soon

I can't do that because the device was purchased from United Arab Emirates and I got it as a gift in Syria but the problem is that there is not even a single apple store in Syria so is there another way to fix that, I googled it and was told to jailbreak the device whitch I did and than hacktivated it but the problem is the device doesn't connect to any network and only shows "no service" and the battery draining too fast so is there any other way to fix this issue

What if you are on contract & move out of the area or even out of the country for a time?

I'm just wondering. My win mob 6.5 phone is not working very well. It freezes, the alarms have 5 alarms when only 1 was set & sometimes they seem to not even go off. Previously they would go off even when turned off--didn't seem to make a difference. Sometimes it is really slow to open an email, etc. & this one was a replacement for the Touch Pro 2 which wasn't working right.
So at any rate, I need to get a new one before long & want another smart phone--a reliable one this time. I would like to get the iPhone 4S I think.
I'm eligible for an upgrade, although when I used the upgrade fundtion & looked at the iPhone 4S, it just showed the 2 yr price--it didn't show my New Every 2 discount.
In addition, I'm not sure what my long term plans are. I'm not planning on moving anywhere real soon, but it is possible that I might be moving out of the area before 2 years are up or maybe not. Or I might even go overseas for awhile.
So what happens if you are on a 2 year contract & move out of the area either permanently or out of the country for months or more? btw, before these smart phone fiascos, I kept my last previous basic LG flip phone for about 5 years because it just worked.

So what if its a different Verizon region? You just move & keep your contract if there is service?
& if you suspend without bllling, is there a time limit on that?
Of course they should give you credit for months when you could get a new phone but keep the old one. Before this period just ending (which because they messed up & called a replacement an upgrade & put me on a new 2 yr contract when all along I said no, when I got that taken off & then corrected the upgrade date (originally it was supposed to be 12/2011 & they had changed it to 12/2012) rather than reset it back to the original they reset it to when I got the replacement phone or actually a few months later so I think the contract end date was in July. But now I wlll be up to when my original upgrade date should have been. Well actually I guess they allow you to upgrade maybe 22 mo or so into a contract or they used to.
My previous phone before this 2 yr period I kept the phone for 5 years. The phone before that which was also a flip phone, the hinge broke at least a couple of mo before I was eligible for upgrade so I had it taped together.
I didn't look at other phones & I don't know what their 2 yr contract price would be.

What is the url for 'Design Time for Guided Procedure'

Hi,
I'm new to Netweaver CE. My question is, how do I login to GP Design Time? What is the url? I have installed Netweaver CE 7.1 in my system. What else is required?
Thanks & Regards,
Lohit

Hi,
This is the URL to directly access Design Time
http://<host>:<port>/webdynpro/dispatcher/sap.com/cafgpuidttemplates/ADesignTime
If you have the proper Roles, you can see the Tabs in the portal for Design time & runtime.
Go through this blog for Roles.
/people/ashutosh.rastogi/blog/2006/11/25/setting-up-roles-for-caf-gp-and-visual-composer
Thanks
sreeni

How to stop the process for some time

I want to stop the process for some time can any one give the package or keyword or example for the same
For suppose two programs A and B.. .B will run based on output of A. What i need is... When A is executed the process will stop for 5mins then B has to execute...

You can use signals with DBMS_ALERT to "wake up" a procedure.
Procedure A is something like this:
DBMS_ALERT.REGISTER('B_FINISHED');
do logic...
when finished - send a signal
DBMS_ALERT.SIGNAL('A_FINISHED','B you can start');
now wait until B is finished
DBMS_ALERT.WAITANY(...)
continue logic hereAnd Procedure B is
DBMS_ALERT.REGISTER('A_FINISHED');
wait for a to finish
DBMS_ALERT.WAITANY(...);
do logic...
when finished, signal A it can continue
DBMS_ALERT.SIGNAL('B_FINISHED','A can continue');This is useful if u they need to wait for each other within the code. if they just need to wait - call B from A.
Hope this helps.
Edited by: Pyrocks on Nov 8, 2010 8:50 AM

Schedule the Job for 2 times

Hi BW Experts,
If I schedule one Job for 2 times at the same time what will happen for Delta Loads.
Please give me the reply.
Regards
Anjali

Hi,
For the first time when the job runs records will be updated and then in between the FIRST and SECOND Job when it runs, if there are any new records available then this second time Job will fetch those records otherwise it will update zero reocrds.
Thanks,
Nagesh

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe

How do I find the key for my time capsule router

How do I find the key for my time capsule router

Hello, see if these are of any help...
http://www.iclarified.com/entry/index.php?enid=4547
http://manuals.info.apple.com/en/TimeCapsule_SetupGuide.pdf
If it's the Pre-Shared Key you're looking for, open Airport Utility, under the menu item Base Station, look for Equivalent Network Password.

Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

TS4268 Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Pls.he

Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?

Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have.

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

Whats the datatype for the time in the format mm:ss.ms

Similar Messages

Maybe you are looking for