When a patch fails ...

Hello.
I was just applying an HRMS patch when a worker failed on a job
Found the fix (another patch to apply to update a file)
When I tried to apply this new patch, the utility asks:
If you have partially applied a patch, you must continue with your
previous AutoPatch session until it completes successfuly.  -
If you try to re-apply a patch that you have only applied partially,
AutoPatch may apply the patch incorrectly.
Enter Yes to confirm that you wish to overwrite your previous
AutoPatch session and begin a new AutoPatch session.
Enter No to continue with your previous AutoPatch session. [No] : Yes
As you can see I entered YES to start a new patching session. Was this the wrong this to do?
The secondary patch updated the file, then I had to start a NEW patching session for the HRMS patch.
What was the better approach to take? Will the HRMS patch now fail, or not apply itself correctly?
How can you keep two patching sessions going at the same time?
Thanks
11.5.10.2
11.2.0.3
Linux Red Hat 5

As you can see I entered YES to start a new patching session. Was this the wrong this to do?
No, you did the right thing.
The secondary patch updated the file, then I had to start a NEW patching session for the HRMS patch.
Correct.
What was the better approach to take? Will the HRMS patch now fail, or not apply itself correctly?
No, apply the patch again from the beginning after applying the pre-req. patch and it should not fail this time.
How can you keep two patching sessions going at the same time?
http://onlineappsdba.blogspot.com/2007/10/how-to-apply-11i-patch-when-adpatch-is.html
Thanks,
Hussein

Similar Messages

  • Patch fail when installing Apps. Not Updating

    Whenever i try to install an application it says application successful but patch failed, unable to extract the downloaded files and it gives me the U44M1I210 error code. i can open and use the applications but they are a little buggy and i cant update them from the creative cloud app on my laptop. i have a mac and i tried uninstalling and reinstalling the apps but it didnt work. i have a destinations folder set to applications for downloads. help.

    Downloading apps stuck on waiting...: Apple Support Communities
    Waiting applications: Apple Support Communities

  • I tried downloading Adoboe Photoshop CC and it says: Installation succeeded but a patch failed. How do I fix this?

    Let me explain. I have an HP 2000 series laptop running Windows 7 Home premium with a 500gb hard drive. I currently have Adobe Photoshop CS4 on my computer but I uninstalled it first before downloading the trial of CC. I figured when my 30 day Photoshop CC trial was over I could go back and download CS4 with the CD again. I just wanted to try CC to see how different it was from CS4 and for some reason when I install it gets to 99% and when it finally reaches that 100% the error message comes up "Installation succeeded but patch failed." I have tried to hit the retry button a number of times and each time it still gives me the same error message. I tried restarting my laptop to see if this would fix the issue and it did not. What does this "patch failed" error mean and how do I fix this so I can download my adobe photshop CC trial?

    Yeah for some odd reason out of no wear i am able to successfully download everything. Ill be honest i couldn't download everything properly while watching Netflix. ha Weird. But yea i just got Photoshop and flash to download fine! so thats awesome thank you for the tip i will be sure to add that next time i have a problem thank you!

  • Patch Failed -  error 004, Could not find etc\config\inventory

    Hi:
    I'm trying to upgrade a 10.1.0.2 database with the new patch (via Enterprise Manager) and although EM had all steps succeeding (cachePatchFile, checkTarget, stagePatch, expandPatch, applyPatchWIN, collectionStep) when I look at the logs, I see that the applyPatchWIN step actually failed. Does anyone know why this occurs? How do I make redo the last two tasks after making whatever changes I need to make?
    Thanks. (log contents follow).
    Output Log
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\oracle\product\10.1.0\Db_1\vaff01-vista03.foo.com_orcl\sysman\emd>C:\oracle\product\10.1.0\Db_1\vaff01-vista03.foo.com_orcl\sysman\emd>C:\oracle\product\10.1.0\Db_1\vaff01-vista03.foo.com_orcl\sysman\emd>
    C:\oracle\product\10.1.0\Db_1\vaff01-vista03.foo.com_orcl\sysman\emd>
    C:\oracle\product\10.1.0\Db_1\vaff01-vista03.foo.com_orcl\sysman\emd>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>
    Running: C:\oracle\product\10.1.0\Db_1\sysman\admin\scripts\osm\ecmApplyOPatch.pl
    Argument count: 2
    Perl version: 5.006001
    Hostname: vaff01-vista03
    Operating system: MSWin32
    Time: Tue Oct 5 16:35:00 2004
    Tue Oct 5 16:35:00 2004 - Attempting to apply patch to Oracle home (C:\oracle\product\10.1.0\Db_1)...
    ---------- Error Message ----------
    Error: 004
    Could not find etc\config\inventory to apply patch
    ----------- End Message -----------
    Tue Oct 5 16:35:03 2004 - Patching failed.
    C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>C:\oracle\product\10.1.0\Db_1\EMStagedPatches\3761843>More?

    Bug No. 3671290
    Metalink Note: Note:308709.1
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:8628931871909914380::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,308709.1,1,1,1,helvetica

  • Error when applying patch 3171663(11.5.9 CU2 )..

    hi..
    error when applying patch 3171663(11.5.9 CU2 )
    below error in log file:
    Assigned: file mscplan.odf on worker 1 for product msc username MSC.
    Time is: Sat May 22 2010 21:58:03
    FAILED: file mscplan.odf on worker 1 for product msc username MSC.
    Time is: Sat May 22 2010 21:58:04
    ATTENTION: All workers either have failed or are waiting:
         FAILED: file mscplan.odf on worker 1.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    below error in workerlog.. in adworker1
    ===============================================================================
    The table is missing the index MSC_TRADING_PARTNERS_U2
    or index MSC_TRADING_PARTNERS_U2 exists on another table.
    Create it with the statement:
    Start time for statement below is: Sat May 22 2010 21:58:04
    CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
    (SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
    (INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
    FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
    COMPUTE STATISTICS TABLESPACE MSCX
    Statement executed.
    AD Worker error:
    The index cannot be created as the table has duplicate keys.
    Use the following SQL statement to identify the duplicate keys:
    SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
    FROM MSC.MSC_TRADING_PARTNERS
    GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
    HAVING count(*)>1
    AD Worker error:
    Unable to compare or correct tables or indexes or keys
         because of the error above
    Time when worker failed: Sat May 22 2010 21:58:04
    ====================================================================
    My application version :11.5.9
    my database version 8.1.7.4
    Regards
    Jaffer Ali

    >
    Use the following SQL statement to identify the duplicate keys:
    SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
    FROM MSC.MSC_TRADING_PARTNERS
    GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
    HAVING count(*)>1
    >
    Pl post the output of the above statement
    HTH
    Srini

  • Upgrade error illustrator CC 2014 - Patch failed

    Creative Clouds states that Illustrator has successfully installed, but that a patch failed..
    I have manually uninstalled and reinstalled Illus. When that did not work, I uninstalled all adobe products restrated my PC and reinstalled everything.
    Same error.
    The error reads as follows when I open illustrator:
    Error reads: Error loading plugins.
    ContextMenuTouch.aip
    CurvatureTool.aip
    CurvatureToolUI.aip
    CurvatureFittingSuite.aip
    DesignLibrary.aip
    PNGExport.aip
    SketchingTools.aip
    TouchStatusBarUI.aip

    When starting Illustrator after I get the above error, this is what I get:
    The procedure entry point
    ?UI_DoPointerEvent@UI_ScrollView@controls@dvaui@@MEAANPEAVUI_Node@ui@3@AEBVPointerEvent@53 @@Z could not be located in the dynamic link library dvaui.dll

  • CC patch fails after initial install

    I have a new laptop (Win 8) and am installing CC apps. After downloading the apps, the app manager gives me the following error message:
    Installation succeeded, but a patch failed.
    This behavior has been consistent for Dreamweaver, Photoshop, and InDesign. When I try to update afterwards, it simply said "Patch failed."
    Any idea what is going on and how to fix it?
    Thanks.

    Hi jefferymoulton,
    Welcome to the Community!
    Likely you will need to review your installation logs similar to your previous discussion at http://forums.adobe.com/thread/1326319.  Please see Error U44M1I210 | Install updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-up dates-ccm.html which discusses the steps you have performed so far.  The next step will be to review the installation log files to determine the exact error you are receiving.
    Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc. html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.
    -Ankit

  • Patch Fails: 119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch

    When I try to use my Sun(TM)Update Manager, I get:
    119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch Failed.
    Utility used to install the update failed with exit code 997. Patch is not available in the patch directory.
    It is the only patch left to be installed and I tried rebooting several times with no luck. There is no 119907-13 directory or 119907-13.jar in my /var/sadm/spool either. Thanks for any hints.
    --Bob                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Thanks.
    I have the free version of Solaris for the x86/x64 platform on my workstation at home. I did register the OS when I installed it, but I do not have a support contract.
    I am curious as to why this has never been an issue before with the hundreds of patches I've installed previously.
    If I do not wish to purchase a support contract, there ought to be a way to get the patch out of my Sun(TM) Update Manager so that the green indicator in my
    systray doesn't drive me nuts.
    Thanks for your help and any further suggestions.
    --Bob                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Automated error email notification when outbound IDOC fails

    Hi,
    The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
    I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
    There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
    Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
    I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
    Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
    Please give your inputs or any other alternate solution to send mail through workflow when  outbound IDOC fails.
    Thanks in advance.

    Hi,
    I guess in your outbound partner profile for PAYEXT. you need to add process code  EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

  • How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    Hello Fran,
    You can wrap the job chain in a master job chain in the first step and set the final status handler there.
    You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
    Regards Gerben

  • How do I restore my tabs and windows, whether open or closed, when everything else fails?

    This is not so much a question, as an answer that some people desperately need.
    Ever since Version 34, Firefox has done a superb job of restoring the tabs that the user has created, either on restarting Firefox (if that option is chosen) or on request.
    The details of how to restore tabs are covered in Firefox's basic help online, and even how to deal with several crashes in a row (such as in an addon) ruin the normal backup file are also well explained.
    However, today I accidentally pressed Alt+F4 twice on my poorly-designed keyboard and closed my main window, with 93 tabs, and another Firefox window as well. I'm not sure this is exactly what happened, but I lost all 93 of my tabs.
    I read many of the postings in which people give various suggestions, but none worked. Every time I restored a version of the sessionstore.js file I saw the same lonely empty tab. Restoring prefs.js did nothing, and neither did making changes in the internal configuration constants.
    I tried refreshing/resetting Firefox (which preserves bookmarks), but I still couldn't restore the tabs. It was now clear that the problem was in sessionstore.js (and all its backups) for sure.
    I'm writing this for people who must restore their windows or tabs, and don't mind getting technical about it. That was my situation.
    The solution was to realize that the sessionstore.js file contains JSON code, which is an efficient way to represent integers and strings arranged in a tree structure.
    I figured there must be a JSON editor somewhere, and it turns out there is a great one available online, at www.jsoneditoronline.org . It can read a file on your computer, edit it, then save it back on your computer.
    As soon as I viewed sessionstore.js in the editor, it was obvious how easy this was going to be. The top level of the tree is understandable. I simply grabbed the data representing the window with 93 tabs, and dragged it from the list of closed Firefox windows to the list of open windows. This automatically moved the history of each tab, and even the strings entered into forms.
    After copying sessionstore.js back to the Firefox profile, I started Firefox one more time. The playing of Pandora signalled that my tabs were back and functioning once again.
    Now, editing JSON code is not something that everyone is ready for. And your problem might not be reflected in the JSON tree so simply. But, for technical-minded people who don't want to lose their tabs or windows to a mistake or a crash, this technique can be just what's needed when everything else fails.

    That sounds very handy. Nice going. A kind of backup would be to
    create a folder in the Bookmarks Manager, and keep a list of links there.
    Just one note. The sessionstore file shows the last windows / tabs that
    are open. Because the window with the 90 tabs was closed first, then the
    other, that is what caused your issue.
    Please edit the post title by adding '''==Solved==''' to it. Others may think
    you are asking for help, not offering a solution.

  • Occurred Error while scheduling the SSIS package "This occurs when CPackage::LoadFromXML fails."

    Hi ,
        While scheduling SSIS package i am getting following issue can anyone help me how to overcome or fix this problem
    The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
    This occurs when CPackage::LoadFromXML fails.
    ADDITIONAL INFORMATION:
    The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.".
    This occurs when CPackage::LoadFromXML fails.
    Niraj Sevalkar

    Hi,
    Are you trying to import a different version into the Wrong server. i means are you trying to
    import a 2008R format package onto a 2005 server. You cant do that.
    Regards, PS

  • How can we resend AS2 MDN messages back to TP when initial try failed.

    Hi,
    We would like to auto retry a failed AS MDN messages back to our TP. We are connected with AS2 and at the channel level we set the retry interval and retry count, but it seems still the MDN is not retried automatically when initial try failed for any reason.
    Appreciate your help.
    Thanks,
    Levey

    I have and iPhone 6 and have been receiving the same error message. I have done all the trouble shooting possible, and still receive the message. Are there any other suggestions? Thank you kindly!

  • What exception should I use when commit work fails ?

    hi all:
        I create a class with methods to insert , modify and delete trasaction data, 
    when commit work fails, I want to throw an exception, what exception should I use
    for this case?

    In general, you should do your commit using CALL FUNCTION IN UPDATE TASK. As this runs in a different process, you will never be able to catch an exception in your main task, even if you throw one in the Open SQL code. What you should do is carefully validate your data before posting it to the database, so that commit cannot fail for data integrity reasons. If it fails for technical reasons (DB down etc.) there is nothing that your code could do about it anyway, so in this case even getting an exception would be no use. What exactly is it you are trying to accomplish?
    -- Sebastian

  • TS4036 How do i continue the icloud restore on my iphone, it has stopped when my wifi failed ?

    How do i continue the icloud restore on my iphone, it has stopped when my wifi failed ?

    Either it will continue on it's own after a while, once wifi is up or you may have to start it again.
    Chances to continue on it's own are more if you started restore less then 48 hours ago.

Maybe you are looking for