When adding a database copy to a server in the dag I receive the following error message
I have tried force replication, but didn't work. any suggestion on this
The wizard could not complete . clokc finish to close this wizard.
elapsed time 00:02:52
summary 1 item 0 succeeded, 1 failed
EX01-DB01
Error:
A source-side operation failed. Error An error occurred while running prerequisite checks. Error: the specified database isn't
configured for replication and therefore cannot be used to perform seed operations. Database:EX01-DB01,
Server:XXXXXXXXX
Warning:
Active directory couldn't be updated in HeadOffice site affected by the change to EX01-DB01; it won't be completely usable
until after active directory replication occurs.
Exchange management shell command attempted
Add-MAILBOXDATABASECOPY. Identiy EX01-DB01 -Mailboxserver HUTAEX01'
ActivationPreference '3'
After Add-MailboxDatabaseCopy command fails, do you see if the DatabaseCopy added to the server or?
I have seen this issue, it fails with above error, but after sometime it shows the copy added to the server.
Check the event log for more information also, any event related to AD!!!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Similar Messages
-
During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
CloudControl 12c: when adding cluster-database single instances are missing
Hello ,
I'e have installed the agent 12c on every single host of our RAC. When adding a database to CloudControl 12c just the RAC-instance gets discovered - but not the single database instances on each host.
Due to this when clicking targets -> databases I just see the cluster-database - but not every single instance of the database.
Compared to another RAC database this is totally different behaviour.
Any help will be appreciated
Rgds
JHHello ,
maybe I should try to explain the issue a little bit clearer...
We have one RAC database called PROD02. When clicking "targets -> databases" I see the following:
PROD02 of type Cluster Database
PROD021 of type Database Instance
PROD022 of type Database Instance
That's the way it shoudl be - that's the way I expected it...
For the newly cofgured RAC database, called PREP02, it looks different when clicking "targets -> databases"
PREP02 of type Cluster Database
The single instances don't show up. Of course I see the single instances when clicking on "PREP02" under the item "Instances".
Now I wonder why these two RAC databases are differently displayed when clicking "targets -> databases". When trying to add the single instances (clicking "Add" under "targets -> databases") and selecting then either "only on the host <hostname>" or "on all hosts in the cluster" no single instances are found or displayed...
Rgds
Jan -
When deleting emails i get the following error message at times ...The IMAP command “UID COPY” (to Deleted) failed for the mailbox “INBOX” with server error: Error 9. Server error. Please try again later..
Please complete or update your system profile so the users here can properly help you.
Which email client are you using? -
Following error message 'The item “iPhoto Library” can’t be moved because “10.0.1.3” can’t be modified' pops up, when I'm trying to copy my iPhoto library to my Synology NAS. Any thoughts what I need to do in order to succeed?
Would you rather recomment me to change to another programme like to iphoto to store and work with my photos?
I would use the NAS for documents and other data that do not need a library with database files inside. For iPhoto a small portable drive that you can plug in directly would be perfect; you can get one for 79$ http://mac-portable-hard-drive-review.toptenreviews.com/western-digital-review.h tml
Before you try to copy your iPhoto library anywhere, make sure it does not have any inconsistencies, that could prevent copying. Run a rebuild, using the First Aid tools. See this post by Old Toad on how to do it: Re: iPhoto version 8.1.2
The item “iPhoto Library” can’t be moved because “10.0.1.3”
That error message is very typical for copying between incompatible file systems. I get this error message usually when I try to move iPhoto libraries or Aperture libraries to drives with MS Dos (FAT) or unix formatting, or when some of the image files inside the library contain ethnic characters (Umlaute), have very long file names, or the filenames contain other special characters.
Do you have any other large data sets that you could try to move to your NAS instead of your iPhoto library? Movies, Music? Then move these first to have enough working space, when you try to move the iPhoto library. If you are running out of space, it will be difficult for the OS to move large amounts of data at once. That will need working space. -
While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
DerkIt's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key. -
When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?
Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.
Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
Is there a way to have bookmark folders automatically collapsed in Safari when adding bookmarks? This would be a huge convenience in navigating to the right folder w/o having to deal with an eye chart of a folder tree.
Myself as well...
I think it is a tremendous problem. Im my case it is extremelly important to manage, organize and sort favorites.
I am new to Mac and safari... and I spent a lot of time researching a solution for that thinking it was me that couldnt find this option. I like to use safari because of the "gestures". This is great. But when it comes to favorites, safari is a nightmare!!!
Also, I use to like the option in Firefox that we can have the leftside bar with the favorites and navigate to the links in the right. In safari the links are open in the full page. And then we need to come back to the favorite everytime.
I would be glad if someone could come out with good solution or suggestions how to deal with it in fafari.
Regards.
Miro -
when adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?
View Menu -> Sort Photos...
-
I loaded Digital Editions onto a second computer at home. When I try to download a book from the library I get the following error message: E_Act_Not_Ready, License Server Communication. Any suggestions?
Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?
-
I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !
Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook. -
When I drag or copy a selection from Photoshop 8.0 into Powerpoint the selection always appears in Powerpoint with a black background.. How can I prevent this?
Photoshop doesn't have a way of copying a selection, only the contents of that selection. You can save and load selections, but these are really just channels. As such, selections are essentially just black and white information. So I'm not sure what you are seeing in Photoshop when you make your copy, but PowerPoint should just get the information that you see. Screen shots of both Photoshop and PowerPoint may help though.
-
when signing in i get the following error message --- activation server error -- code:E_Auth_not_ready - can someone help?
Please follow the instructions in the link below:
https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
I hope this will help.
-Chirag -
When I try to download books I purchased from Kobo I get the following error message: Error getting License. License Server Communication Problem: E IO CANNOT OPEN.
I've spent hundred of dollars on books that I can't get access to! How can I fix this?I've been having the same issue! I've tried uninstalling and reinstalling ADE but that hasn't helped; I've even created a new Adobe ID and that was also a fruitless venture. I haven't yet tried to unauothorize my device, but I am hesitant to do so as it seems that others have tried and have not succeeded. I am desperately caught in the middle of a series and I would love to have access to the new books that I've been trying to download from my library!
Maybe you are looking for
-
Hello! I wonder if anyone could help me with my navigations buttons... I am trying to create buttons with images I have created with photoshop in a way that tthey behave like this: "up" stage with one image, the "over" stage with another image and I
-
Validation on line items not triggering for MR41 tcode
Hi, I have to put a validation on MR41 to check the amount entered on the screen. I am using OB28 to define the validation. Also, I have created user exit in the validation/substitution program where the necessary checks are done. But the validation
-
Validity period to be next year
Hi, we have scenario where in we are supposed to generate quota on August 1 st of this year with validity and deduction period being the next year ( ie .1.1.2010 - 31.12.2010) . we use both pcr s and config. for quota generation. In the PCRs we speci
-
My fully charged iphone4 is dead. Power and home reset doesn't help.What can I try?
My fully charged iphone4 is dead. Power and home reset doesn't help.What else can I try?
-
Percentages Incorrect - Not accurate to decimal place
Hi Experts, I have a report that will generate sales quantities split by company and the associated % of total sales. The sales % displays to 2 decimal places but the % is the integer before rounding. i.e. if the % should be 6.99723% it would display