When creating a resume and not using the provided templates... How do you set the page up to all you to utilize left and right flush margins at the on the same line? Any other tips for setting up the document for a resume would be appreciated! Thanks...
For an example......
SUMMARY
ksdlkasjdflksdmflkagflkaglaksdfmlksadmflaksmdflaskdmflaksfgalkfdgndflkngladfknga lmfv,amsdglkaglkajglkjalkgfmlmv.zmxcv.mldkglksdgjlskdfjglskdfglkdsfgmlsdkfmg
PROFESSIONAL EXPERIENCE
Comapny Location
Title Date
This side left flush This side right flush
Also, as another option how would I set up a template save it to use for motifying my resume according to the specific job inwhich I am applying?
Thanks!
That is poor type layout.
European languages read left to right, a ragged left edge is the worst possible layout for listed data.
The only circumstance you should use the left/right alignment is in header/footers for running heads and page numbers wheer they are widely separated and therefore easy to scan as individual short snipetts of text.
Peter
Similar Messages
-
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
On my Ipod Touch 4G, the camers shuter is stuck closed. I have reset it, restored it, turned it off/on, nothing has worked. Operating system is up to date. This has been an issue for a while, but it normally fixes itself.
Try here:
iPod touch: Hardware troubleshooting
Also try placing the iPod in recovery mode and then try to restore via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?
I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter -
Order types, why do we need to create our order types and not use the stand
HI
Order types, why do we need to create our order types and not use the standard ones during implementation.Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi -
i only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers. we do not have any other computers hooked up to the account. how do i get past this?
Understanding Home Sharing
Troubleshooting Home Sharing -
when I try to backup my iphone I don't get an option to do so when I control click on my iphone in itunes only eject and restore is there any other way to turn on the backup function?
See Here...
How to BackUp
http://support.apple.com/kb/ht1766
Troubleshooting Backup Issues
http://support.apple.com/kb/ts2529 -
Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?
Is their any other iPhone owners that dislikes the screens, fonts, display varieties this last update provided ? I know at least ten of my friends and family do not like the new fonts, screens it downloaded with the update. Is there away to change these ?
-
I'm facing a bit of a problem.
Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
The Hard disk format is "MS-DOS (FAT)".
The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
I'd appreciate some help. Thank you.Hi Simon. How is it formatted, FAT or NTFS?
I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS. -
On starting up my new iPhone 4s, it freezes on the apple logo. I have tried the reset buttons trick and have tried restoring again too but neither works. Any other ideas? Or is the phone simply corrupt in some way?
Did you try to connect in recovery mode and restore without using the latest backup?
Recovery mode and How to back up your data and set up as a new device
If setting up as new device does not work, you'll have to get it serviced or looked at by visiting an Apple Store.
Did you try to remove the ipsw firmware file and restore, to make iTunes download a new copy from Apple?
Those files are located here:
Rename, move, or delete the iOS software file (.ipsw)
iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
Mac OS X
iPhone
~/Library/iTunes/iPhone Software Updates
iPad
~/Library/iTunes/iPad Software Updates
iPod touch
~/Library/iTunes/iPod Software Updates
Note: The tilde "~" represents your Home directory.
Windows 7 and Vista
iPhone
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
iPad
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPad Software Updates
iPod touch
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
Note: If you don't see the AppData folder, you may need to show hidden files.
Message was edited by: Ingo2711 -
Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you
bgar
On what computer operating system is your Premiere Elements 13 running on?
What are you (manually) or the project (automatically) setting as the project preset?
(See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio (even if fields look grayed out).
What are the properties of these source media, including file extension? The brand/model/settings of the camera that recorded the
video may give us this information.
When the source media hit the Timeline for the first time, is there an orange line over their content? Or is there
no colored line and an orange line appears over them only after you have edited them?
Please elaborate on "poof" after rendering the Timeline content by pressing the Render button above the Timeline content with the orange line over it.
a. Media Offline displays?
b. Other?
ATR -
i m using apple 6 .u lauch 8.1.3 then i update my mobile then error 53 .. isuse and not used the mobile occurdind to eroor 53 my mobile is in under warenty im buying my mobile from u.s.a . pls help how i solve this problem
Hey dheeraj55,
Thanks for the question. If I understand correctly, you have been getting an error when you are trying to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard
Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.
-
How can I Sync a folder (which contains all types files, sub folders and weighs some gigs) through wifi or USB ( and not using cloud services) between my New Ipad and Win 7 PC? Any apps available?
kindly suggest a solution.
Thank you inadvance!You can only import photos/videos via USB and the camera connection kit.
ITunes: Syncing media content to your iOS devices
http://support.apple.com/kb/ht1351
Cheers, Tom -
Why Has Adobe Removed The Option For Individuals To Purchase Software And Not Use The Cloud?
As an individual who has been using Adobe products for about 25 years for my personal use and not as a business, I find the new policy of "renting" the software and using "The Cloud" for, at least in my case, a prohibitive monthly fee, to be totally unacceptable and will result in my no longer being able to afford using Adobe products. I do not understand why Adobe cannot offer their new cloud program for individuals and companies that may wish to use the new system and have the resources to pay in perpertuity, but they should also have the option for those of us who would rather purchase upgrades for whatever programs we use and keep them on our computer without "The Cloud" service.
I am 67 years old and living on a fixed income. I basically use four adobe programs... Photoshop, Premiere, After Effects, and Audition as I do volunteer work at a local non-profit radio and tv organization. If I were to "rent" those individually it would cost $80 per month... so I could take the next deal and get access to all software for $50 per month... I cannot afford either of those. If I could upgrade one or more of the programs every two or three years... keeping them on my computer and not using "The Cloud," then continuing to use the products would be doable. However, being forced into a program that requires a monthly fee and use of "The Cloud" which I do not need to use, seems totally unfair. I certainly understand that there are businesses and individuals who will love the new program, but why not have the option? Or perhaps a "Senior" discount as you do for educators and students?
Something to think about. It seems Adobe may be moving to the "Cable Television" model of monthly fees that will go no where but up.Hey there, you may have heard that Adobe is continuing to sell and support CS6 for customers who prefer traditional licensing. It's last year's version instead of the latest-and-greatest CC release, but it's something to consider if that's important to you.
As far as a "senior discount" on Adobe software, there has never been one – but one thing to consider is becoming a student or teacher because there is no age restriction on that, in which case you may become eligible for education discounts.
Hope this helps. -
I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.
Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.
Maybe you are looking for
-
Re: Re Support request to KCCC
In 2010 KCCC my employer, procured licensed Windows Server 2008 OS from a vendor who has now closed the company, now coming to 3 years since date of closing. Mid this year our Windows Server System untimely closed down! In the process of recovering
-
Hello all, new to Dreamweaver (CS5, Mac), but with 15+ years of experience with HTML and GoLive, I have some difficulties finding my way. Not all my q.s are answered in the help, The Missing Manual or the FAQs. Like this one: I have a multi-language
-
Display a field/ text as hyperlink in the selection screen.
Hi All, I have a requirement wherein i need to display a text/field as hyperlink in the main selection screen. Uponn clicking the hyperlink i need to display an ALV in the pop up screen( i.e pop up window). Any pointers on how to get hypelink in main
-
I've been trying to format my SD Card but the "erase" function is grayed and not usable. Is there another way to format an SD Card on Mountain Lion? Thanks in advance.
-
i have try LONG PATH ERROR FIXER did you encounter this error *Path too long *Error cannot delete file: cannot read from source file or disk *Cannot delete file: Access is denied www-LongPathTool-com Just download it.. it may help you guys