When i add long text it effects the width of other server side include

hi
i have included some pages to my index page in a cell of a
table by server side include
when the text is too long it narrows the other text !!!
although the texts are in table cells !!!
how can i prohibit this effect ?no one of them effect the
other
thanks in advance.

It would be good to see your site to tell for sure.
There are several things that can cause this effect. Are the
included
tables wider than the cell on your index page? Do any of the
included pages
have images that might be wider than your target cell? Does
your target
table have a defined height?
Your include page should have only text with no wrappers
(tables, etc.) no
specific height, styles, or images. (yes you can include
images but you have
a whole lot of other stuff to consider) If your included text
is in a cell
with a width of say 600 but your target cell has a width of
400, the include
will widen the target cell to 600 wile narrowing adjoining
cells because it
is trying to keep your target table to it's predefined width.
Height is non supported in most browsers but in some will
cause your text to
widen a cell before it lengthens it so get rid of that in
your target table
if it's there.
If one of these ideas doesn't fix your problem, post a link
to your site and
to the include page so we can better tell what's going on.

Similar Messages

  • How to add long text in bdc for transaction fb01 ?

    IN the existing program of bdc fb01
    i have to add a long text field
    but it gets stuck while i process in sm35
    is there a fm to add the field directly
    thanks in a advance

    Hi
    You can upload the Long texts separately into the transaction using the CREATE_TEXT fun module
    Need to pass the correct parameters like OBJECT,ID, OBJECTNAME and LANGuage with the proper declarations.
    see the sample code and do accordingly
    REPORT zmm_longtext_sm
           NO STANDARD PAGE HEADING
           LINE-SIZE 255.
    Description :   This Program is used to Upload the Service Master
                 :   Long Texts using the Fun Module CREATE_TEXT
    Internal Table for Upload of Long Texts Data
    DATA: BEGIN OF itab OCCURS 0,
            asnum like asmd-asnum,    " Service No
            text  LIKE tline-tdline,  " Long Text
          END OF itab.
    To create Long Text lines for CREATE_TEXT function module
    DATA:BEGIN OF dt_lines OCCURS 0.
            INCLUDE STRUCTURE tline.   " Long Text
    DATA:END OF dt_lines.
    Variable declarations for CREATE_TEXT function module
    DATA : dl_name TYPE thead-tdname,   " Object Name
           dl_lan TYPE thead-tdspras.   " Language
    Constants
    CONSTANTS:
    Object ID for Long Text of Service Master
      c_best     TYPE thead-tdid VALUE 'LTXT',
      c_material TYPE thead-tdobject VALUE 'ASMD'. " Object
    Parameters
    PARAMETERS p_file LIKE rlgrap-filename.
    At selection-screen on Value Request for file Name
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Get the F4 Values for the File
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_file.
    Start Of Selection
    START-OF-SELECTION.
    *To Upload Flat file
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'DAT'
        TABLES
          data_tab                = itab
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
    Upload the Texts
      SORT itab BY asnum.
      LOOP AT itab.
        dt_lines-tdformat = 'ST'.
        dt_lines-tdline = itab-text.
        APPEND dt_lines.
        dl_lan = sy-langu.
        concatenate '00000000000' itab-asnum into dl_name.
    Call the Function Module to Create Text
        CALL FUNCTION 'CREATE_TEXT'
          EXPORTING
            fid         = c_best
            flanguage   = dl_lan
            fname       = dl_name
            fobject     = c_material
            save_direct = 'X'
            fformat     = '*'
          TABLES
            flines      = dt_lines
          EXCEPTIONS
            no_init     = 1
            no_save     = 2
            OTHERS      = 3.
        IF sy-subrc <> 0.
          WRITE:/ 'Long Text Creation failed for Service No'(001),
                 itab-asnum.
        ELSE.
          WRITE:/ 'Long Text Created Successfully for Service No'(002),
                 itab-asnum.
        ENDIF.
        AT END OF asnum.
          REFRESH dt_lines.
        ENDAT.
      ENDLOOP.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Why can I no longer text message on the larger format by turning my phone?

    Why can I no longer text message on the larger format by turning my phone on its side?

    Hi,
    Since iChat 6 the SMS option in the Menus has disappeared.
    However if you add the number to a Buddy List as if it were  Screen Name but with the leading +1 (as in +1234567890) it will work over AIM.
    It only works to US phones on some Carriers.
    9:44 pm      Wednesday; January 8, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Osx 10.7.4   safari 6.0  when I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list.  this just started a few days ago after an update.  Has anyone else noticed this?.

    osx 10.7.4   safari 6.0  When I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list.  This just started a few days ago after an update.  Has anyone else noticed this?.

    Just for those who are interested, this is what cleared the "bookmark menu"  trbl I had.
    Open System Preferences > iCloud
    Deselect the box next to Bookmarks, then reselect it.
    Quit and relaunch Safari. Try a bookmark again.

  • How to add a text box in the layout (View)

    How to add a text box in the layout (View)

    Hi.
    Right Click in the RootUIElement container.
    Click Insert Element.
    Give Name: Input
    Type : Input Field.
    Press Enter.
    Regards
    Bala.

  • How do i change my message settings so that when i get a text message only the phone number shows up - not the message?

    how do i change my message settings so that when i get a text message only the phone number shows up - not the message?

    settings - notification- message - show preview - OFF
    you can also select the alert type your want -banners or alerts

  • When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

    when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

    Hello Todd:
    I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
    Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
    Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
    Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
    Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
    I hope that this works for you, Todd!   ~ Brian

  • When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

    When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

    Settings > Messages > Send & Receive > Start new conversations from:
    Only your phone number is selected.

  • For some reason when my daughter sends a text to someone else I get it and vice versa.  Also, when I send a text to her the text comes to me as well.  How do I stop this from happening?

    For some reason when my daughter sends a text to someone else I get it and vice versa.  Also, when I send a text to her the text comes to me as well.  How do I stop this from happening?

    This is iMessages, not an SMS/MMS, and this means the same Apple ID is registered for iMessage on each iPhone.
    You or your daughter need to activate your own Apple ID for iMessage and FaceTime. The same Apple ID can continue to be shared for iTunes store downloads - for music and apps.
    On the iPhone, go to Settings > Messages > Send & Receive.   Select the Apple ID at the top and sign out.   Sign in with the new Apple ID.
    Make sure the same email address is not available below You can be reached by iMessage at on each iPhone.

  • When I add a watermark and flatten the transparency, it duplicates the file within the file.

    When I add a watermark and flatten the transparency, it duplicates the file within the file.  (a 105 pg file becomes 210pgs)

    After doing so, use the Save As command to save the file under a new name.
    This should optimize it and reduce the file's size, sometimes dramatically.

  • When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

    When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

    I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
    If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
    Please continue reading about bookmarks and some related extensions at
    * http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
    * http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
    * http://dmcritchie.mvps.org/firefox/kws.htm
    If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

  • When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ? Thank You

    When I add pictures into MUSE , do the pictures resize for web quality (And so the page loads fast enough) or do I have to do this using an external software like photoshop, etc. ?
    Also is there any way I can change the contact form email for all of my contact forms at once.
    I have over 100 contact forms and i want to make them reach the same email anyway I can do that without going one by one?

    If you have placed the image in Muse using File > Place and then scaled the image down in Muse while editing, then Muse publishes/exports the scaled down/optimized image in final output. When using as a Fill, the output size depends on the Fitting option you setup in the Fill options.
    As for the contact form email, you would need to specify the email address for each form individually. There is no workflow to edit the same for multiple forms at a time.
    Cheers,
    Vikas

  • TS4268 Since upgrading to iOS 7.0, my friend can no longer text me.  I get all other people's texts with no problem.  I can text her, she can't text me.  It bounces back to her phone as "message undeliverable".  Does anyone know what to do about that?

    Since upgrading to iOS 7.0, my friend can no longer text me.  I get all other people's texts with no problem.  I can text her, she can't text me.  It bounces back to her phone as "message undeliverable".  Does anyone know what to do about that?

    your number can remain on the imessage server for some time

  • With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    I'm having the same problem.  I've tried going into the Library and deleting the mail plist file(s), which fixes the problem, but only temporarily.  Would appreciate any help here too!

  • Server Side Include not functioning the same across website

    digitaldealershipsystem.com
    <!--#include file="/includes/navigation.php" -->
    ** this is the navigation pulldown.
    This works on most of the main pages
    When you go to
    digitaldealershipsystem.com/live.html
    digitaldealershipsystem.com/live2.html
    digitaldealershipsystem.com/live3.html
    The same is included but does not work on Chrome, but does work on Firefox
    To restate, the naming is the same on all web pages, and it works on Chrome -- except for these "live" pages
    On Firefox, they work on all pages, included live pages
    For testing purposes on the following page, I tried 'virtual' file and that did not change the results in either browser
    digitaldealershipsystem.com/live4.html
    My thoughts:
    If there is a conflict on the page, then why only is Chrome being effected
    Any ideas?

    If clearing the cache does not help, then check your code validation - you have several errors. Server side includes are browser independant - because they are assembled on the server, not the client. If there's a difference in rendering between browsers, it has to do with your html/css and has nothing to do with SSI.

Maybe you are looking for

  • Space around Table in Numbers

    I'm new to Numbers and need to print a table I have devised. But there is too much space around it. When I enlarge the columns and rows, it splits into 2 pages. How do I get rid of the large gaps around the sides?

  • Select-options and ALV

    Hi all, I have create a select-options with 5 fields and alv  and a button(get list) in webdynpro, i have to retrieve the values into alv from table through select-options by clicking on button. and i have written a function module for select options

  • Getting errors in XMLImporter command

    I am trying to run following XMLImporter command in our R12 instance unix server, as per the OAF Dev Guide java oracle.jrad.tools.xml.importer.XMLImporter $APPL_TOP/<companyIdentifier>/ak/12.0.0/mds/<module>/webui -jdk13 -mmddir "$OA_HTML/jrad" -user

  • Firefox giving me network connection error in yahoo mail

    I am getting this message from yahoo mail when I use Firefox my regular browser. I went back to an old version of IE and I did not get the error message. I cleared out some stuff earlier I was wondering if it was connected to it.

  • Line-size line-count.

    Hi frnds,    I need to change the values of line-size and line-count dynamically. If option 1 is selected, then the line size should be 132 and line count 60 . if option 2 is selected then line size should be 60 and line count 90.    How can i do. Pl