When I am working on a pic on Lightroom 5 and choose to edit on Photoshop CS5, it opens Photohop but not the image

Can anyone help me with this... it all worked great during the trial period but once I bought the program... can't edit in Photoshop

Correcting error in link-
http://www.lightroomforums.net/showthread.php?19637-Lightroom-edits-not-appearing-when-usi ng-quot-Edit-in-Photoshop-quot

Similar Messages

  • I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

    I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

    David Boroditsky wrote:
    The problem is that the mac chokes on having 2 identical mics attached at the same time.
    Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
    The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

  • HT1386 i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

    i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

    Hey renie1515,
    Thanks for using Apple Support Communities.
    When you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
    Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
    Have a nice day,
    Mario

  • Repairing Library Permissions: But the instructions didn't work  clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Went to Help.  But the instructions didn't work
    clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

    Give this a try:
    1 -be sure to have a current backup of the iPhoto library.
    2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
    3 - click on the File button, locate and select your iPhoto Library.
    4 - check the Unlock and Apply to enclosed checkboxes.
    5 - make no changes to the other checkboxes
    6 - click on the Apply button.
    OT

  • Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

    Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
    Just want to avoild spending hours migrating everything across....

    Yes, I can read but just can't write DVD's. I get:
    This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
    Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
    In the old account I have reset SMU, Pram... but no change.

  • When I cut and paste a selection from a website, and paste to Textedit, why will the text open but not the image: was OK before Lion.

    Before Mac OS Lion I could select text and pictures from a Firefox webpage, and paste into Textedit, with no problem. Since Lion the text selected pastes fine , but for an image there pastes only anicon which does not, and will not open.
    I checked with the same procedure in Safari, and everything is fine.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r45
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Having started using Nikon 810, photos open in Lightroom 5 but when I go Edit In Photoshop CS5, it opens but no picture appears. Help.

    I've been told it can be done but I can't figure out what is wrong. I can't get files into Photoshop from Lightroom. Do I need to change the Export and if so how?

    Choose the option to "Render with Lightroom" as it sounds like your version of PS has an ACR Plug in that is not the current one of ACR8.6. Or update PS to the latest.

  • When I double click a PS file, it opens PS but not the file. Why?

    Since I purchased CS5, I've found that double clicking, or dragging to the Ps (or Ai) icon in the dock will only open the program, but not the file. I then have to go back and double click the file again to bring it up. I've looked in preferences but cannot find a way to resolve this. A friend who also has CS5 does not have this problem.
    Thanks, Neil.

    Have you updated your OS lately?
    Are you on a Mac or a PC?
    That behavior usually is sign of a file vital for Photoshop (and some other Adpobe apps too) missing.
    I've published an old Adobe technote about that here http://www.ninisworld.com/thecorner/tutorials/photoshopopen.html including also the file needed on a Mac.
    If you are on a PC I have no solution to suggest.

  • Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there

    Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort  by kind but that does not work. It arranges all folders but not the files in the folder.

    Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

  • HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

    I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
    2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
    Please advise.
    Thanks,
    Bob

    Copy the entire /Music/iTunes/ folder from old computer to new computer.
    See this -> http://support.apple.com/kb/HT4527

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • Hi, I'm doing a poor man's morph project on my motion 4 . It works perfect while on motion , but when I try to import it to tcp it will transfer the photos but not the optical flow fx. what am I doing wrong?

    Hi I don't know if I was able to send this question before but here it goes again. I'am doing a poor man's morph project on my motion 4 program, and it works great while in Motion, but once I try to import it to fcp, it will import the photos but not the optical flow fx, what am I doing wrong? I appreciate you help

    Decided to use cmd A to select all the icons on the desktop and then looked for a right click option.   There it was - the option to move to a folder.   I now have them all in this folder which tells me it holds 157 items.   Now you know why I needed to know LOL
    Thought it might be of help to someone.
    Cheers Mally

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

    FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
    Hope you can help.
    I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

    IOS: using facetime http://support.apple.com/kb/ht4319
    using an ipad will use the email address since you can't make a phone call.  see the link.
    Your basically calling/emailing yourself that's why your getting a busy signal.

  • When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

    If anyone can help me with this I would be seriously grateful.
    When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
    I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
    This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
    I've used Aperture in the past under previous versions and not had this problem.
    Any help would be great.
    Thanks.
    Bob.

    Hi Jack,
    Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
    It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
    I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
    Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
    Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

Maybe you are looking for