When I click on network utility and try to verify my disc it will not allow it due to a damaged disc. My Genius 3 repair disc doesn't work with the Lion OSX. What should I so now?

I have an iMac 10.07. Have a damaged disc according to disc utility. What should I do to fix this?
Thanks,
John

If you are using Lion you will need to restart your Mac in recovery mode. Then run disk utility to repair your hard drive.
OS X Lion includes a built in set of utilities in the Recovery HD. Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up. After the Recovery HD is finished starting up, you should see a desktop with a Mac OS X menu bar and a "Mac OS X Utilities" application window. Note: If you see a login window or your own desktop and icons, it is possible that you didn't hold Command-R early enough. Restart and try again.

Similar Messages

HT1937 i have an iphone that i bouth in italy, but now in israel it dosen't work with the israeli sim, what should i do?

i have an iphone from italy, but now in israel it dosen't work with the israeli sim, what should i do?

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

My brother have given me his I-phone3, But he lives in US, he has given his phone in India, The sim card is not working with the phone. What should I need to do.?

My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?

Send it back to him and have him unlock the phone for you so you can use it with your carrier.

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

TS4079 I have an iphone 5 and my Siri doesn't work at the moment. But when I restart my phone it works but 5 minutes later it doesn't work again!!! What should I do???

I have an iphone 5 and my Siri doesn't work at the moment. But when I restart my phone it works but 5 minutes later it doesn't work again!!! What should I do???

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?

Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade?

Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?

Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?

You can disable autoupdate by following these steps:
Go to main menu > Tools > Options > click on Advanced tab > click on Update tab and then click on the round radio button that says ''Never check for updates (not recommended: security risk)''
Refer the attached screenshot

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

What is the problem exactly???
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Firefox is freezing. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox still running. I close Firefox in Task Manager & can re-start Firefox.

Firefox is freezing in the middle of a browsing session. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox to still be running. Once I close Firefox in Task Manager, I can re-start Firefox. This can happen several times in the space of a few hours? I'm running Vista Home premium with Firefox 3.6.16, and this problem has only started in the last 4 weeks. Can Anyone Help? Core 2 Duo E7300 with 4GB RAM.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Shockwave Flash 10.2 r152
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to ope

i am currently running a trial version of indesign. i am trying to make a cd booklet. when i open a new document and try to find 'compact disc' in the document presets, it isn't there. all i have for options are 'default and custom'. is it possible to open the 'compact disc' preset from a trial version?

Are you sure, Eugene? I have this option:

Appleworks does not work with mountain Lion. What can I use for drawing and painting?

Appleworks does not work with mountain Lion. What can I use for drawing and painting?
MacBook
Marian

Please see this article which examines various possible alternatives to AppleWorks:
http://rfwilmut.net/aw

TS1398 I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And i had checked with my rout

I have 2 ipads 1st ipad 2G and ipad 3G whats the problem with the 3G ipad the wifi is now getting connected to the wifi modem and the ipad 2G is getting connected no problem with the 2G ipad what should i do...????? And I had checked with my iball baton router with the iball sevice provider.

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Wifi problem with the Lion OSX

Like many others i am facing the problem of connectivity with the Lion OSX. In my room i have 2 macbook pro, one running on Lion and the other on Leopard. The problem arises with the wifi. The one with the Lion seem to get a stronger signal when both of them are placed side by side but drops out quickly. This does not happen with the MBP running on leopard.
I have tried turning on and off the wifi. It does not help. At times it gets connected but nothing comes on. Other times it shows the "the connection timeout" error.
I do hope that Apple solves the problem soon as it is clearly a OS related problem.
Eagerly waiting for the update.

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

HT5444 mac pro 2007 and later doesn't work with mountain lion

how do i downgrade back to a later version since lion or mountain lion dose not work with my pro tool 10 version?

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

When I click on network utility and try to verify my disc it will not allow it due to a damaged disc. My Genius 3 repair disc doesn't work with the Lion OSX. What should I so now?

Similar Messages

Maybe you are looking for