When I connect my Digital AV adapter to my Iphone 4 my flat screen displays a pink screen. How do I fix it?
I am on my second adapter and the problem still exists. I have tried all three HDMI ports and two different cables. Have the newest updates from Apple and Verizon. I've messed with my tv setting. With the Iphone there isn't a whole lot to adjust when it comes to the settings.
have you by any chance tried another tv?
if your tv is not compatible with the iphone then I'd say you can
try new ports and adaptors until the cows come home even if you
don't have any cows
Similar Messages
-
This problem makes it impossible for me to sync any apple device to my itunes library. I have tried reinstalling itunes, but it still doesn't work. My computer recognises the devices, but itunes doesn't.
Suggestions?See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Next
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.
Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.
-
I purchased the digital av adapter so that I can plug my iphone4s to my flat screen. It does mirror to the TV but the picture is red/pink. How can I fix it?
Are you using the YRW composite connectors on the TV or the RGB composite connectors? - the cable will only work with YRW and the correct input choice on the TV - if you are connecting correctly then I am sorry I don't have any other suggestions
-
When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.
I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix? -
When I connect an external drive I'd like to run a program which is on it. How could I do that?
When I connect an external drive I'd like to run a program which is on it. How could I do that?
I tried automator, but without success.
ThanksInteresting question. Others have provided the direct answer (no, massive security hole), and a little time with a search engine finds various existing discussions of autorun-related topics (eg: here and here and here), and a link to the Do Something When tool, and there is the DeviceListener example in the Xcode kit and to adding a folder action where the volumes are mounted. See the topics for details. Haven't tried this stuff, though.
-
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
I have an iPad2.
when I connect to my home network I see a list of at least 5 or 6 networks. how do eliminate this list?iPadNoobie wrote:
I figured I didn't really phrase the question correctly...
I was just wondering why there are so many on the list and the ones that don't have a padlock icon next to them worry me...
I would like to block/disable them.....
The wireless radio picks up and displays all WiFi signals that are openly transmitted. That is to show you the networks available to join. Those that do not have the padlock are unsecure networks, which should not bother you as long as you do not attach to them. Their being open has no affect on your security.
You cannot completely and permanently block their being listed. Just ignore them and don't attach to any unkown networks. -
I forgot my passcode. The Ipod touch is disbled. When I connect to Itune, it asks tp put the passcode but the screen is locked no inputs. Any help?
You must restore it with iTunes.
Try placing the iPod Touch into recovery mode.
http://support.apple.com/kb/HT1808 -
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
when i connect my phone to itunes it saysThe iPhone cannot be used because it requires iTunes version 10.6.3 or later and i just downloaded the latest version
Julie, there seems to be some snafu with the updater, so go here https://support.apple.com/kb/DL1575 and get the download directly. That should do the trick.
Deb. -
When I am connecting my Iphone to Itunes I get error code 0xE8000003? How do I fix it
How can I fix this!!??
When I am connecting my Iphone to Itunes I get error code 0xE8000003? How do I fix it
Try here > https://discussions.apple.com/thread/2661257?start=0&tstart=0
And here > iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
FYI;
This is the Apple Support Communities > iPod > iPod classic > Discussions forum.
In the future if you have questions regarding your iPhone please post in the iPhone forum here. -
TS3477 When I connect my macbookair to the miniport, all I get is a screen saver, how do I fix this?
When I connect my macbookair to the miniport, all I get is a screen saver, how do I fix this?
Please detail EXACTLY what you are connecting, what cables, connectors and adapters you are using, and what else you already have connected.
-
i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud? i have an 2nd generetion ipad and an iphone 5, thanks for you answers!
(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.
-
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W.
Maybe you are looking for
-
Pages '09: The inspector window doesn't open any more - no idea why
Don't know what and when something went wrong. But I can't open the inspector window anylonger. Any idea?
-
My laptop opened with a grey flashing file folder with a question mark inside it . How do I open my laptop! I have tried force closing several times and restArting nope ! nada! Suggestions?
-
Conditional Build Tags...weird behavior?
If I apply a conditional build tag to a topic from the TOC tab, the topic gets included in the output even if I have specified that tag to be excluded. However, if I apply the same conditional build tag to a topic from the Project tab, then the topic
-
Why does my new Adobe Reader XI not allow double sided printing?
Why does my new Adober Reader XI not allow double sided printing as the previous version did?
-
Two "Find" Requests for Bridge
I'd like to be able to find all the images that don't yet have any keywords assigned - perhaps a filter to "show items with no keywords only" or a sort option to sort "By Keywords". I'd like to be able to search (find) images by thumbnail. Meaning, I