When I flatten an acroform, the radio buttons no longer show as checked.
If I don't call flatten (CFPDF....flatten="true"), the PDF shows the radio buttons selected, but as soon as I flatten the PDF, the radio buttons are not shown as selected. Checkboxes work, text fields work, but radio buttons just all show as unselected.
This is on CF 9,0,1,274733. Has any one else seen this?
Any suggestions?
Yes, that setting disables the backgrounds and if button use a background image then they may become invisible.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Similar Messages
-
How to combine the radio buttons in different panels
Hello everyone.I have to have some form of panels, each of which I want to put a radio button. How to make sure that when you select one of the radio buttons, the second was not selected ? Now both are selected. For convenience, made a small example.
var w = new Window('dialog', '');
p3 = w.add("panel", undefined, " panel1 ", {borderStyle:"r"});
p3.orientation = "column";
p3.alignment='left';
p3.preferredSize = [200,107];
p3.spacing=0;
var etProd = p3.add('edittext',undefined,'');
etProd.preferredSize = [170,20];
etProd.alignment = "top";
grProd1 =p3.add('group');
grProd1.orientation = 'row';
grProd1.alignment="left";
btnProd_add = grProd1.add('button',undefined,"Add");
btnProd_del = grProd1.add('button',undefined,"Del");
rb1 = p3.add('radiobutton',undefined,'import');
rb1.alignment='left';
p2 = w.add("panel", undefined, " panel2 ", {borderStyle:"r"});
p2.orientation = "column";
p2.alignment='left';
p2.preferredSize = [200,107];
p2.spacing=0;
var etProd2 = p2.add('edittext',undefined,'');
etProd2.preferredSize = [170,20];
etProd2.alignment = "top";
grProd2 =p2.add('group');
grProd2.orientation = 'row';
grProd2.alignment="left";
btnProd_add = grProd2.add('button',undefined,"Add");
btnProd_del = grProd2.add('button',undefined,"Del");
rb2 = p2.add('radiobutton',undefined,'import');
rb2.alignment='left';
w.show();If you are wanting a toggle them then you could that in the call backs… add above show();
rb1.onClick = function() {
rb2.value = false;
rb2.onClick = function() {
rb1.value = false; -
After upgrading to IOS 7.0.2 I can't see the radio button in the music app on my iPad
The radio button does not show anymore in my music app on my iPad after I upgraded to IOS 7.0.2 - it did show briefly the first time I started the app after upgrading but immediately disappeared and is now gone for good. Don't have the issue with my iPhone at all. There it still shows - I tried to restore my iPad and again, opening the music app I was able to see the radio button for 5 seconds and than it disappeared. Any suggestion ?
Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.
-
Calling a method in a bean when i clcked on the radio button of a table
Hi,
I need to call a method in the bean when i clicked on the radio button of a table
I tried it , by callling the method in selectionListener..
I can able to execute only System.out.prinln method,
rather than that i am unable to execute any other expression..
like setting rendering property to a component.
Thanks in advance,Hi,
what you say is not true. You can execute any code within a selection listener you want. If you can print then it shows the method s called and you can execute whatever you want within this method
Frank -
Using the radio button component to go to a frame on a MovieClip
hello,
I am using the radio button component in Flash with a continue button.
When the user clicks their option in the radio button and then clicks continue, I want it to go to a movieClips Specific frame.
Here is the breakdown and the script I have so far is below.
The radio group os named RadioButtonGroup
The instance names for each of the three options are noviceButton,intermediateButton,expertButton
My continue button has an instance name of continueButton
and my movie clip I am trying to target has an instance name of level_mc
here is my code so far:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
gotoAndStop (frameNumber);
the problem starts with my varFrame line-I don't know how to get it to go to the movieClip and gotoAndStop at a specific frame, based on which radio button was clicked and after the continue button is clicked.
Does anyone out there have any ideas?
thanks
babsuse:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
level_mc.gotoAndStop (frameNumber); -
While opening a screen none of the radio button should not selected
Hi,
i have three radio button on the screens.By default the first radio button is getting selected for each and every time when ever i'm opening the screen.i dont want the default select should happen and even i dont want any of the radio button should be selected.
how i can acheive through dialog programming.
kind regards,
Poornima.Hi,
You can have radio buttons with any one field selected from a group .
ex:
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail radiobutton group g2 user-command cmd default
'X',
r_sumry radiobutton group g2,
r_totals radiobutton group g2.
selection-screen end of block b2.
or
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail radiobutton group g2 user-command cmd,
r_sumry radiobutton group g2 default 'X',
r_totals radiobutton group g2.
selection-screen end of block b2.
or
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail radiobutton group g2 user-command cmd,
r_sumry radiobutton group g2 ,
r_totals radiobutton group g2 default 'X'.
selection-screen end of block b2.
Else you can opt for checkbox and have all of them not checked.
Regards,
Dep -
Report should executed based on the radio buttons on the selection screen
Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area - S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumarSee the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
line-size 160
line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
and the component's where used list *
Author : Seshu *
Date : 07/24/2006 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
|----
|----
|----
*12/04/06 | Seshu | DEVK921821 | Removed new page for each material *
======================================================================
Table definition *
TABLES: mast,
stko,
stpo,
T418,
makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
gc_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
wa_stko like stko.
DATA:
Objekttyp 'Material'
otyp_mat(1) TYPE c VALUE '1',
ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data: max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
ueberl_kz(1) TYPE c VALUE '*',
min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
b_flag(1) TYPE c VALUE 'X',
ecfld(250) TYPE c,
v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv,
gt_sp_group TYPE slis_t_sp_group_alv,
gt_events TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_save(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant,
g_default(1) TYPE c,
g_exit(1) TYPE c.
Includes *
INCLUDE .
Internal Table Declaration *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
stufe LIKE stpox-stufe,
vwegx LIKE stpox-vwegx,
END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
INCLUDE STRUCTURE stpox_alv.
DATA: info(3) TYPE c,
END OF alv_stb.
DATA: BEGIN OF stb_orig.
INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
stlty TYPE stpo-stlty,
stlnr TYPE stpo-stlnr,
stlkn TYPE stpo-stlkn,
stpoz TYPE stpo-stpoz,
idnrk TYPE stpo-idnrk,
meins TYPE stpo-meins,
menge TYPE stpo-menge, "Component Qty
END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
stlty TYPE stko-stlty,
stlnr TYPE stko-stlnr,
stlal TYPE stko-stlal,
stkoz TYPE stko-stkoz,
bmein TYPE stko-bmein,
bmeng TYPE stko-bmeng,
END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0, "YHG079407
class LIKE klah-class, "YHG079407
klart LIKE klah-klart, "YHG079407
chked LIKE csdata-xfeld, "YHG079407
noobj LIKE csdata-xfeld, "YHG079407
dsply LIKE csdata-xfeld, "YHG079407
END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stko-stlnr, "BOM Number
bmein TYPE stko-bmein, "UOM
bmeng TYPE stko-bmeng, "Base Qty
expand(1) TYPE c, "Expanding Field
END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
idnrk TYPE stpo-idnrk, "Component (Material)
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stpo-stlnr, "BOM Number
meins TYPE stpo-meins, "UOM
menge TYPE stpo-menge, "Base Qty
END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
HEADER LINE.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01 = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
if p_bomlst = 'X'.
Get the data Based On Material #
perform get_data.
else.
Get the data Based On Component
perform get_data_component.
endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
PERFORM e01_fieldcat_init USING gt_fieldcat[].
PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
when 'PICK' or 'F2'.
if not alv_stb-idnrk is initial .
if not alv_stb-werks is initial.
if not alv_stb-objty is initial.
SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
call transaction c_tcode and skip first screen.
endif.
endif.
endif.
clear alv_stb.
endcase.
*& Form get_data
Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
CLEAR : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
werks = p_werks AND
stlan IN s_stlan AND
stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of Change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
endloop.
ENDFORM. " get_data
Top of page *
top-of-page.
perform report_header .
*& Form report_header
text
--> p1 text
<-- p2 text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using text-h00
sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using sy-title
sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM. " report_header
*& Form calc_col_and_write
text
-->P_TEXT_H00 text
-->P_SY_LINSZ text
FORM calc_col_and_write USING P_TEXT
P_LINSZ.
data: col1 type i,
col2 type i,
len type i,
str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
at sy-colno(len) space.
write at 160 '|'.
ENDFORM. " calc_col_and_write
*& Form write_other_hdr_details
text
--> p1 text
<-- p2 text
FORM write_other_hdr_details.
data: col1 type i,
col2 type i,
len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
sy-pagno.
write: at sy-linsz '|'.
ENDFORM. " write_other_hdr_details
*& Form get_data_component
Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
FROM stpo
INTO TABLE t_stpo
WHERE idnrk IN s_idnrk.
IF sy-subrc = 0.
CLEAR wa_lines.
DESCRIBE TABLE t_stpo LINES wa_lines.
IF wa_lines > 0.
SELECT stlty stlnr stlal stkoz bmein bmeng
FROM stko
INTO TABLE t_stko
FOR ALL ENTRIES IN t_stpo
WHERE stlnr = t_stpo-stlnr.
CLEAR wa_lines.
DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
DESCRIBE TABLE t_stko LINES wa_lines.
IF wa_lines > 0.
*-- Get the BOM item details
SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
WHERE werks = p_werks AND
stlnr = t_stko-stlnr
and stlal in s_stlal.
ENDIF.
ENDIF.
else.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
clear : t_mast.
endloop.
ENDFORM. " get_data_component
*& Form obj_ident
text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
T_stb-objty NE ootyp_mat,
T_stb-objty NE otyp_doc,
T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
T418 einlesen
PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF t418-matin NE '-'
AND t418-txpos IS INITIAL.
aktuelles Objekt ist Material NLAG
T_stb-objty = '1'.
PosKurztext in ObjKurztext uebernehmen.
T_stb-ojtxp = T_stb-potx1.
MODIFY T_stb.
ELSE.
IF T_stb-objty IS INITIAL.
T_stb-objty = '2'.
MODIFY T_stb.
ENDIF.
ENDIF.
ENDFORM. " obj_ident
*& Form t418_lesen
text
-->P_T_STB_POSTP text
FORM t418_lesen USING lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM. " t418_lesen
*& Form cl_clstab_maint
text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
WITH KEY CL_CLSTAB(21)
BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
Klassenposition in Klassenpositionentabelle hinzufuegen
INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM. " cl_clstab_maint
*& Form alv_stb_prep
Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
alv_stb,
stb_orig,
stb_add.
IF t_stb-hdnfo IS INITIAL.
stb_orig = t_stb.
IF t_stb-mngko >= max_num.
stb_add-ovfls = ueberl_kz.
ELSE.
IF t_stb-mngko <= min_num.
stb_add-ovfls = ueberl_kz.
ELSE.
CLEAR: stb_add-ovfls.
ENDIF.
ENDIF.
IF NOT t_stb-xtlnr IS INITIAL.
stb_add-bomfl = b_flag.
ENDIF.
IF NOT t_stb-knobj IS INITIAL
OR NOT t_stb-class IS INITIAL
OR NOT t_stb-kzclb IS INITIAL.
stb_add-knofl = 'X'.
ENDIF.
ELSE.
CHECK t_stb-stufe > 1.
alv_stb-info = 'C30'.
IF t_stb-ttidx <> t_matcat-index.
READ TABLE t_matcat INDEX t_stb-ttidx.
ENDIF.
stb_orig-hdnfo = t_stb-hdnfo.
stb_orig-stufe = t_stb-stufe - 1 .
stb_orig-ojtxp = t_stb-ojtxb.
IF NOT t_stb-altst IS INITIAL.
stb_orig-stlal = t_stb-stlal.
IF stb_orig-stlal(1) EQ '0'.
stb_orig-stlal(1) = ' '.
ENDIF.
ENDIF.
stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
stb_add-dobjt,
stb_add-objic.
CASE t_stb-objty.
WHEN otyp_mat.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN 'M'.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN otyp_noo.
WRITE: stb_orig-potx1 TO ecfld.
stb_add-objic = '@0Q@'.
WHEN otyp_doc.
write stb_orig-doknr to ecfld. "note 489354
IF ecfld CP '*# '. ENDIF. "note 489354
sy-fdpos = sy-fdpos + 1. "note 489354
CONCATENATE
*d stb_orig-doknr "note 489354
stb_orig-dokar
stb_orig-doktl
stb_orig-dokvr
*d INTO ecfld "note 489354
INTO ecfld+sy-fdpos "note 489354
SEPARATED BY space.
stb_add-objic = '@AR@'.
WHEN otyp_kla.
CONCATENATE
stb_orig-class
stb_orig-klart
INTO ecfld
SEPARATED BY space.
stb_add-objic = '@7C@'.
WHEN otyp_ntm.
WRITE: stb_orig-intrm TO ecfld.
WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld. "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
APPEND alv_stb.
ENDFORM. " alv_stb_prep
*& Form get_level_level
text
FORM get_level_level.
REFRESH : T_STB,
T_MATCAT,
ALV_STB.
CLEAR : T_STB,
T_MATCAT,
ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'PP01'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mtnrv = t_mast-matnr
stlal = '01'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = t_stb
matcat = t_matcat
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
Entry der KlassenstatusTab. initialisieren
cl_clstab,
Entry 'Objekte von Klassen' initialisieren
cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
IF NOT t_stb-hdnfo IS INITIAL.
EXIT.
ENDIF.
Object Identification
PERFORM obj_ident.
READ TABLE hd_tab
WITH KEY stufe = t_stb-stufe
vwegx = t_stb-vwegx
BINARY SEARCH
TRANSPORTING NO FIELDS.
?gibt es diesen Satz schon
nein
IF sy-subrc <> 0.
dann in SFP-Infosatzverweistab. aufnehmen
*d APPEND HD_TAB. "HGH054648
hd_tab-stufe = t_stb-stufe.
"HGH054648
hd_tab-vwegx = t_stb-vwegx.
"HGH054648
INSERT hd_tab "HGH054648
INTO hd_tab "HGH054648
INDEX sy-tabix. "HGH054648
PosNr initialisieren
CLEAR: t_stb-posnr.
SFP-InfosatzKz setzen
t_stb-hdnfo = 'X'.
stb-objty = otyp_mat.
"HGE246532
als SFP-Infosatz in die STB aufnehmen
append t_stb.
ENDIF.
*del ENDIF.
clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
index ASCENDING
*del POSNR ASCENDING. "HGC062735
posnr ASCENDING "HGC062735
hdnfo DESCENDING.
LOOP AT t_stb.
T_stb-index = sy-tabix.
MODIFY T_stb.
PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
if sy-tabix = 1.
format color 3 on.
write:/2 'Level',12 'Item',22 'Component',
42 'Material Description',82 'Base Qty',
107 'Base Unit',120 'Assembly Indicator'.
format color 3 on.
endif.
if alv_stb-MEINs is initial.
v_flag = 'X'.
endif.
if v_flag = 'X'.
format color 5 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP.
format color 1 off.
else.
if alv_stb-STUFE = '1'.
format color 1 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs, 120 alv_stb-bomfl .
format color 1 off.
elseif alv_stb-STUFE = '2'.
format color 2 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 2 off.
elseif alv_stb-STUFE = '3'.
format color 3 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 3 off.
elseif alv_stb-STUFE = '4'.
format color 4 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 4 off.
elseif alv_stb-STUFE = '5'.
format color 5 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 5 off.
elseif alv_stb-STUFE = '6'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 6 off.
elseif alv_stb-STUFE = '7'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 7 off.
else.
format color 1 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 1 off.
endif.
endif.
hide: alv_stb.
clear : alv_stb.
clear v_flag.
endloop.
ENDFORM. " get_level_level
*& Form f4_for_variant
text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE -
How do I include the radio-button items on a second column as possible answers to the question?
Using Adobe Acrobat Pro X, we created a fillable PDF from an existing PDF.
One question can be answered by choosing one of four choices (radio buttons). The answers are laid out in a 2-by-2 arrangement.
When Acrobat Pro converted the PDF into fillable format, it thought that the radio-button answers on the second column are not part of the question.
How can I manually override Acrobat and make choices 3 and 4 part of the question.
Please click attached screenshot for better zoom.George,
i am the OP. I mistyped my email address and cannot log in to my original account.
Thanks for your reply.
How do I give each radio button the same name but unique button values?
I right-clicked the first radio button, chose Properties (Ctrl+I).
I copied the name: "What is your personal net worth in Canadian dollars including spousecommon law partner if applicable".
I clicked Close.
I then went into the Properties dialog window of the third radio button, which is one of the ungrouped choices. I pasted the name [What is your personal net worth in Canadian dollars including spousecommon law partner if applicable]. I then clicked Close.
I get an error message pop up:
A field of a different type already uses this name. Please choose a new name for the field, or change the field type to match the existing field with this name.
What must I do now?
Thanks. -
Sub screen: Handling the Radio button selection?
Hi,
Scenario:
I have a Main screen and a sub screen. From the main screen I am calling the sub screen. On the Sub screen, I have 2 radio button. On the selection of the Radio buttons, I am activating/deactivating few of the screen elements on the sub screen.
I have grouped the radio button and also tried assigning Function code to it, but in vain..:(
Issue
I am not able to handle the event triggered by the selection of the radio buttons?
Kindly suggest.
Regards
s@kHi,
Are you still have any Issue, Let us know
In the Main Screen Element List there is a field OK_CODE pass an entry into it
in the TOP Include
DATA : OK_CODE type SY-UCOMM. " This captures the OK_CODE from the Screen.
Since SUb Screen cant have their Own OK_CODE this can be handled in the Main Screen only
Try in PAI of Sub Screen using OK_CODE if it is not working then Implement the same in PAI of Main Screen
The system will generate UCOMM for Radio Button since they are in One Group only. Each Radio button cannt have a separate UCOMM assigned. In Screen Painter (if It is Module Pool) assign a FCode for the Radio Button.
Even if try changing the FCODe Value they still will have the New Changed Value but cannot be changed.
This automatically triggers PAI . only way to capture it is check
case ok_code. " Optionally you can omit this
when ok_code = 'RAD'. " This is common for all the Radio BUttons but cant be different
if r1 = 'X'.
elseif r2 'X' " Etc.
endif.
endcase.
Ram
Edited by: Ramchander Krishnamraju on Feb 26, 2010 10:37 AM -
After asking a question to the community last week, It now get scores of emails now with questions . I had marked the radio buttons to be notified but
Later found them, and un clicked them all. Also I might have been hacked, because I was charged yesterday with an App, that I did not order!!!
I only know that, because I get an instant message from my bank by phone, when I spend any money. I am worried.
BambiHello Dorothea5916,
It sounds like you changed your forum account preferences and now they have changed back, and you have an unauthorized purchase on your iTunes Store account and have concerns about your account security. I recommend first changing your Apple ID password with this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
Go to My Apple ID (appleid.apple.com).
Click “Manage your Apple ID” and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you're unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
Click "Password and Security".
In the "Choose a new password" section, click Change Password.
Enter your old password, then enter a new password and confirm the new password. Click Save when done.
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password
You should also report an issue with the purchase to the iTunes Store support directly with the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
To enhance security for your account you may want to look into Two-Step Verification to help prevent unauthorized access to your account:
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/ht5570
Thank you for using Apple Support Communities.
Cheers,
Sterling -
IE8 can not display the radio button in B1iP
Hi,
I installed B1i and finished the configuration in B1i. But when assigning systems in B1iP, my IE8 can not display the radio button. Does anyone know how to solve it?
Dawson LuHi Eddy,
Thanks a lot for your proposal.
Yes the explorer may have some wrong settings. I will check it again or reinstall it.
Best Regards,
Dawson -
Why does is not show the radio buttons
I want to display the buttons in a row then radio button in a row under the button and then log scroll pane under the radio buttons. This is my code:
//Add the buttons and the log to this panel.
add(buttonPanel, BorderLayout.PAGE_START);
add(radioPanel, BorderLayout.CENTER);
add(logScrollPane, BorderLayout.CENTER);When i run it it display the buttons and the logsrollpane. Why does it not display the radio buttons?Thanks guys.
This is my problem. We have a big system that produce lots of log files and the software testers have to manually have to go through the logs file and look for a certain XML tags in the log file.
What I want to do is help the software testers my developing a small tool that will allow them to open a log file and then click on a radio button corresponding to a xml tags that they are looking for and automatically highlight the tags in the file in yellow color .
I am not sure how feasible this is and I am stuck.
This is what I have done so far.
Can you please guys help me go forward.
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.filechooser.*;
public class FileChooserDemo extends JPanel
implements ActionListener {
static private final String newline = "\n";
JButton openButton;
JButton clearButton;
JTextArea log;
JFileChooser fc;
// Radio Buttons
static String em01 = "EM01";
static String em07 = "EM07";
/*static String dogString = "Dog";
static String rabbitString = "Rabbit";
static String pigString = "Pig";*/
public FileChooserDemo() {
super(new BorderLayout());
//Create the radio buttons.
JRadioButton em01Button = new JRadioButton(em01);
em01Button.setMnemonic(KeyEvent.VK_B);
em01Button.setActionCommand(em01);
em01Button.setSelected(true);
JRadioButton em07Button = new JRadioButton(em07);
em07Button.setMnemonic(KeyEvent.VK_C);
em07Button.setActionCommand(em07);
//Group the radio buttons.
ButtonGroup group = new ButtonGroup();
group.add(em01Button);
group.add(em07Button);
//Register a listener for the radio buttons.
em01Button.addActionListener(this);
em07Button.addActionListener(this);
//Put the radio buttons in a column in a panel.
JPanel radioPanel = new JPanel(new GridLayout(0, 1));
radioPanel.add(em01Button);
radioPanel.add(em07Button);
//Create the log first, because the action listeners
//need to refer to it.
log = new JTextArea(40,60);
log.setMargin(new Insets(5,5,5,5));
log.setEditable(false);
JScrollPane logScrollPane = new JScrollPane(log);
//Create a file chooser
fc = new JFileChooser();
//Uncomment one of the following lines to try a different
//file selection mode. The first allows just directories
//to be selected (and, at least in the Java look and feel,
//shown). The second allows both files and directories
//to be selected. If you leave these lines commented out,
//then the default mode (FILES_ONLY) will be used.
//fc.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
//fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
//Create the open button. We use the image from the JLF
//Graphics Repository (but we extracted it from the jar).
openButton = new JButton("Open File");
openButton.addActionListener(this);
//Create the save button. We use the image from the JLF
//Graphics Repository (but we extracted it from the jar).
clearButton = new JButton("Clear Text Area");
clearButton.addActionListener(this);
//For layout purposes, put the buttons in a separate panel
JPanel buttonPanel = new JPanel(); //use FlowLayout
buttonPanel.add(openButton);
buttonPanel.add(clearButton);
//Add the buttons and the log to this panel.
add(buttonPanel, BorderLayout.PAGE_START);
add(radioPanel, BorderLayout.LINE_START);
add(logScrollPane, BorderLayout.CENTER);
public void actionPerformed(ActionEvent e) {
//Handle open button action.
if (e.getSource() == openButton) {
int returnVal = fc.showOpenDialog(FileChooserDemo.this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
log.setText("");
File file = fc.getSelectedFile();
try{
BufferedReader in = new BufferedReader(new FileReader(file));
String data;
while ((data = in.readLine()) != null) {
log.append(data + newline);
}catch(IOException ioe){
log.setCaretPosition(log.getDocument().getLength());
//Handle save button action.
}else if (e.getSource() == clearButton) {
log.setText("");
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
JFrame frame = new JFrame("PROGRESS Message Viewer");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
JComponent newContentPane = new FileChooserDemo();
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
} -
Hi
I have two radio group
one is P4_Rate it has two type that i have written as page process as given below
List of values definition
STATIC:Ex_Factory Rate,Rate Inclusive of Transport
2nd one is P4_Frieght_Type it has also two type that i have written as page process as given below
List of values definition
STATIC:Frieght Paid by Company,Frieght Paid by Customer
Now i want to hide the item P4_Frieght Paid by Customer,
when i click the radio button P4_Rate Inclusive of Transport,
For this i have written the following javascript code
<script language="JavaScript" type="text/javascript">
function hide()
var rv = html_RadioValue('P4_RATE');
if (rv == 'Rate Inclusive of Transport')
$x_HideItemRow( html_RadioValue('P4_FRIEGHT_TYPE')='Frieght Paid by Customer');
else
$x_ShowItemRow(html_RadioValue('P4_FRIEGHT_TYPE')='Frieght Paid by Customer');
</script>
but it was not working how to do this?
any mistake in my code?
Thanks & Regards
rewaThe following code works for me:
<script language="JavaScript" type="text/javascript">
function hide()
var rv = html_RadioValue('P4_RATE');
if (rv == 1)
$x_HideItemRow('P4_FRIEGHT_TYPE');
else
$x_ShowItemRow('P4_FRIEGHT_TYPE');
</script>
Replace the 1 in if (rv == 1) by the value in your static list. -
Enable/disable/defaulting the radio button in tabular Form
Hi friends,
I have one radio button column in my tabular form with 3 values for it.
<li>FC
<li>BC
<li>EC
I need to enable/disable the radio buttons according to the position of the user.
If the position of the user is CEO means,
then FC radio button has to be checked defaultly and also for him he needs to have BC and EC radio buttons to be enabled.
If the position of the user is between(1-4) grades means,
then FC radio button has to be disabled, but BC radio button has to be checked defaultly and also for him he needs to have EC radio buttons to be enabled.
If the position of the user is between(4-6) grades means,
then FC, BC radio button has to be disabled, but EC radio button has to be checked defaultly.
How i can achieve this radio button enabling/disabling and defaulting it dynamically according to the user.
Where i need to specify this kind of restriction inorder to work for me in my application.
Brgds,
MiniHi Bob,
thanks for your reply first, and your suggestion too.
I tried in the below manner on the lov definition of my radio button and it hide/shown according to the user who logs into the application.
SELECT 'FC' d, 'FC' r FROM DUAL WHERE lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO')
UNION ALL
SELECT 'BC' d, 'BC' r FROM DUAL WHERE lower(:APP_USER) IN (select lower(user_name) from apps.xxhy_ams_details_v where grade_name
BETWEEN 1 and 4 OR lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO'))
UNION ALL
SELECT 'EC' d, 'EC' r FROM DUALBut how i can check the radio button defaultly according to the user who logs in .
<li> If the employee with the position CEO logs into the application means, he needs to have FC to be checked defaultly.
<li> If the employee with the grade between(1-4) logs into the application means, he needs to have BC to be checked defaultly.
<li> If the employee with the grade between(5-12) logs into the application means, he needs to have EC to be checked defaultly.
Note:
Instead of hide/show the radio buttons defaultly whether it is possible to enable/disable the radio button according to the user who logs into the application.
Brgds,
Mini... -
I tried to move my images (over 25,000) to an External Hard drive to open up some memory, hoping to make my computer run faster. It took three hours to move the images and I see them all in the mac's menus. However when I try to open them with iPhoto now, none appeared. and when I tried to import them back to the main HD they come in to iPhoto just fine, but not with the albums nor any of the massive organization i'd created in the original. this represents years of images, and I can't imagine that I'd have to recopy them into folders/albums again.
Terrance Devlin answered a similar question back in April of last year. He said to make sure the ExHD is formatted to MAC OS Extended (Journaled) and to move the library to the ExHD and then open iPhoto with the option button and select "Choose Library" from the resulting menu.
Command "I" tells me that the new drive is formatted correctly. I can't locate the "Choose Library" when I open iPhoto with the opt button.
First, I wondered if the application needs to be on the same drive as the Library. I sure would like to know if I can find out how to restore all the folders I had them in. Terrance's advice helped the user that had asked the question.
Here's the url for that archived discussion: https://discussions.apple.com/thread/3849933?start=0&tstart=0
Can anyone help? I'm using iPhoto 5. My MAC is an OS X version 10.4.11.
thanks, brokenlomHere are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/
Maybe you are looking for
-
What's new/fixed in version 7.1?
Subject line says it all. Thanks.
-
How to get existing albums to iCloud photo library
My boss is a home builder and he needs albums of homes across his devices and I'm looking for a solution for getting the albums of photos across the devices. Any thoughts? The photos are currently synced from iTunes and when I turn on iCloud Photo
-
BUG: ORA-00600 in SQL Developer while good in SQL*Plus
Just run the following PL/SQL script: SET SERVEROUTPUT ON << outer_block >> DECLARE v_test NUMBER := 123; BEGIN DBMS_OUTPUT.PUT_LINE ('Outer Block, v_test: '||v_test); << inner_block >> DECLARE v_test NUMBER := 456; BEGIN DBMS_OUTPUT.PUT_LINE ('Inner
-
I reinstalled OSX Lion and now safari will not open at all and sends a crash report to apple.
I am unable to open safari after reinstalling osx lion. i checked for any software updates and installed them and still safari doesn't open and just says it will send a report to apple
-
Remove or Diable the Create Button in Calendar iview
Hi everyone, This is in regards to the Calendar iView in collaboration room. I created a team room and added SAP Calendar in that.When I view it, I see the "Create Appointment" button which I would like to remove. The users should not be able to crea