When I go to a link all is fine except the link takes up the entire screen and there is no way to move out other than control alternate delete and brining up task manager to exit out of firefox, help
again, I am able to use search of firefox to get to a link but then all the tool bars from my operating system are no longer available as the link takes up the entire screen (there are no firefox toolbards either so I can't shrink the page etc).. Thus I cannot move around and am stuck with no option but control alt delete to get to task manager to close firefox.
Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.
Similar Messages
-
i tried reseting my ipod when i turn it back on all you see is the apple icon and a loading symbol how do i fix it ?
Try here:
iPhone and iPod touch: Frozen and unresponsive -
mm, I was deleting some files last night and when I came to booting up this morning my Macbookpro (5 years old) i was greeted with a user login screen? put in my password, but all i get is the space screen and no further action...? cant get apps o my bar
Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.
-
I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?
Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps -
When I go into iTunes (the latest update) now, it takes over the entire screen is difficult to remove. Is there a setting I can change in it to have it behave the old way?
I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
Regards. -
There are no more details to give.
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.<br /> -
The browser page originally did not cover the entire page Also, I must place my cursor on the upper limit of the browser page to access the search and Firefox tool bar now.
How can I answer my own question? If I knew the answer, I would not have asked the question.
-
Why does conversion from IMovie to IDvd result in periods of dropped audio ?
Hi
A. I do not use - "Share to iDVD" from within iMovie - but - Share to Media Browser and as Large (not HD)
B. My notes on this
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W -
the new virsoin got a lot of glitchs. when is the new virsion coming out
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
It stays on the blue screen forever until I manually shut it down
Cooper, please start a new thread. You'll get a wider audience and won't confuse Quintonaturner with issues that don't pertain to them. You don't know they have Office. Many Mac users don't. http://www.neooffice.org is a nice alternative, and so is http://docs.google.com/ as long as you don't have Exchange servers that aren't Mac OS X Mail compatible.
-
It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
-
When I bring up my Mozillafirefox, all I get is a window with a blank white screen, (and the firefox logo). (After using Firefox very happily for over a year, I had to 'reinstall' Firefox 3.66 about a month and a half ago, (and lost all my bookmarks as a result therein), and hope I can get my firefox back this time without having to reinstall. Mozilla Firefox is still listed as one of my active programs). HELP! Is there a way to get my firefox back without reinstalling? Many thanks!
== This happened ==
Every time Firefox opened
== June 30, 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)same problem. wtf. just happened one day when i went to use it. nothing out of the ordinary installed either....
-
Hey
i install the master collection....everything works fine apart from encore..i wont open..all i get is the open screen and that is it...i have tryed to start to program in proccess (which i have to start version cue)....but i will not start...i think it might be version cue...ill post something in there as well....just trying to get as much help as pos...cheers people!Alexy,
If this is an installation issue: Adobe offers
free
installation support -
Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error. I have Windows XP (Media Center Edition) and all updates (Firefox, Adobe PDF, Microsoft, virus protection, etc) are installed. This has only been a problem since Firefox 4, and isn't a problem in Internet Explorer.
Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]] -
When I close Firefox, then later want to start up again, I get I message that Firefox is still running. With "START TASK MANAGER", I need to close Firefox in order to start again.
I have the same problem. Firefox won't unload regardless of how long I wait. Literally hours ... I must go in and 'end the process'. This has been a real hassle for a while now. Even considered giving up on firefox. Please look into this! An additional problem; I have to run firefox to get the updates, but I can't get the updates to take because I can't get firefox to unload so I can restart it.
Maybe you are looking for
-
Help with installing Windows 95 on Windows 7 64 bit Home Virtual PC
I apologize in advance. I am new to using Virtual PC and I don't understand what I'm doing wrong. I am trying to create a virtual Windows 95 on my Windows 7 Home 64b computer in Virtual PC. I have the original W95 cd, and I was able to create a Wi
-
Texas Hold'em bug : last 2 tables crash and take your money
I just encountered a pretty nasty bug with with the Hold'em game. After accumulating around 300k I went to try my luck at the 50k table. The game took me back to the menu of the Hold'em game. I tried again, same thing. I decided to try the last table
-
Need Xorg config file for dual graphics cards, triple monitors
Hey guys, I'm having a bit of trouble getting triple monitors working on my system. The two plugged into the graphics card (radeon x300) work fine, but the one plugged into onboard graphics (geforce 6150SE) refuses to appear in xrandr. I figure I nee
-
Hi, My brain is frozen or something because I couldn't think out this issue. Basically my form input radio name and value are dynamically pulled from a database. The name of the form is concat with a name and id is from a database. On the form pro
-
Linking several Flash movies together
I created 5 "movies" in Captivate and published as .swf files with accompanying .htm files. The Captivate file, .swf, and .htm files are all in a folder on our website and therefore should be accessible to the Internet. I've linked the first movie fr