When I go to my groups in Yahoo groups, and into Photos, and open a photo, only the Medium version shows, when I click on Large or Original, no pic opens-just title-

I don't know what else to tell you. Yahoo told me to clear my history, cache and I did but that didn't help. When I go into IE I have no problem and can see all 3 pic versions. Don't know why FF is giving me a problem.

Thanks to the-edmeister and cor-el, for speed of response. I had not inadvertently moved the Bookmarks-Toolbar : I was confronted with the situation right after Firefox 9 had installed and unfolded in front of me. At first, the toolbar area looked reassuringly familiar, but when I started normal work, I discovered the lack of tabs and the only reference I could see to TABS was a tiny button inviting me to group tabs (which was unhelpful to say the least, filling up the screen with tiny unreadable windows). Sure, there were tabs forming, but they were invisible, unless I used the group button. Eventually, I was brave enough to use "reset toolbars" and the tabs came back in the way I want them, but it was a traumatic 2-3 hours out of my life. I kept on "adding a new toolbar" to see if I could make use of it; I kept giving them names, but it is impossible to see where the new tool bar is! (the toolbars don't have a little bit to grab at one end). In my opinion, Firefox should not have allowed the Tab Bar and the Bookmarks Toolbar to become caught up with each other - they have completely different functions. I don't think I would like to play around with "Make a new profile"! I was so desperate that I have already downloaded version 3.6 again, ready to install, for if I was unable to resolve the version 9 problems above.

Similar Messages

HT201272 I bought the Full Version of following App for my iPad 5 months ago: Interaction of Color by Josef Albers, I just bought a mini iPad and on the purchased apps option only the Free version shows, and when asking for the full version it asks me to

I have already tried the steps above, among the options of purchased apps I only get the free version not the complete version I had already bought

dmason wrote:
I had this problem as well. I was under the gun on time and just purchased it anyway. After installation I contacted support and they refunded me the amount.
You should have a backup of your servers regardless of circumstances. You would then be able to restore the server software.
When Apple repair machines they will often just swap it or swap the hard disk and will not make any effort to transfer your files. They assume you are doing a backup. Anybody running servers absolutely has a responsibility to ensure they have aduequate backups even more than 'normal' users. While Time Machine may not be wholely suitable for backing up servers Time Machine is so simple even normal users can use it and therefore no longer have any excuse for not doing backups.

How do i change my message settings so that when i get a text message only the phone number shows up - not the message?

how do i change my message settings so that when i get a text message only the phone number shows up - not the message?

settings - notification- message - show preview - OFF
you can also select the alert type your want -banners or alerts

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

I created a book in iBooks Author using the Photo Book template. When I rotate to portrait orientation, the photo or widget disappears and a table of contents appears with only the interactive media showing.

Thanx for the prompt response, KT. I have indeed seen that thread, only just after I posted the question.
I have spent hours on the phone with what I now know is a call center in Texas on this question.
I think Apple could be a little more "hands on" with iBooks Author users, and it should also be pointed out that landscape photos will not display in portrait mode.
In my case, I used gallery widgets to display vertical photos, since they look better in portrait mode.
But instead of simply rotating, the page disappears and a TOC of interactive media appears. The gallery behaves as expected when tapped. This is not what I expected, but since the gallery works, I can live with it.
Right now I have "tickets" telling me to "fix" this "problem or to disable portrait mode.
I don't want to disable portrait mode.
Will Apple accept the books if I tell them this is not an "error?"

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

When using photoshop do i use the jpeg version of my photo or the raw version - as I have both

When using photoshop do i use the jpeg version of my photo or the raw version - as I have both?
Please can someone advise?

If you use the RAW version to edit with PS you'll have to save the results to the Desktop and import it into the library as a new file.
If you edit the jpeg version must make sure to flatten the image before saving normally so the extension remains as a jpg file. Here's some more info on that:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note 1: screenshots are from PSE 10
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

Is any way to set up the store or computer to download only the cc version not the HD when you buy a movie?

every time that I download a movie in I tunes it downloaded the two version CC and HD, so it takes a long time for the HD. how can I stop or only download the CC version?

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Don't do that - flag the photo and go to the target event and use the add flagged photo to selected event command to move it intact within iPhoto
LN

I have 2 apple tvs. One in the bedroom, one in the living room. When I try to airplay from my iPad, only the bedroom icon shows up. How do I add the living room?

I have 2 apple tvs. One in the bedroom, one in the living room. When I try to airplay from my iPad, only the bedroom icon shows up. How do I add the living room?

Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

Why can't I get video when watching wmv files. I get audio but no video. And yes, I've loaded the latest version of flip4mac.

When I try to play a wmv file on my Mac I get the audio but no video. I've downloaded the latest version of Flip4Mac but that doesn't seem to help. I recently "upgraded" to Lion. Any connection?? Any ideas??? I posted this a week or so ago and was told to download the latest version of Flip4Mac. Let me repeat: I've already downloaded the latest version of Flip4Mac and it doesn't seem to help.

So did you download the latest flip4mac? (just kidding)
Does this happen with all wmv's or just specific wmv files?
Try playing them with vlc to see if they play there.

Ever since the last download, I am unable to edit my playlists on itunes. When my phone is not plugged in, my playlists that are on my phone are not on itunes but my songs are. Only the default playlists show up. How can I get all of my playlists back?

I usually create and edit playlists on itunes and then sync my phone to update my phone. Ever since the last upgrade, I can't do this. When I open itunes, my playlists are not there, only the songs and the default playlists. If I plug my phone in and click on My Phone at the top of the screen, I can see my playlists but I can't edit them. How can I get my playlists that are on my phone back on my itunes?

http://support.apple.com/kb/HT1296

Adding VLAN to Po-Group and OSPF routing what is the correct way?

Hi Community,
I recently had an issue that brought down the links between a couple of switches...luckily this was done after hours and I did not save the config so was able to revert back.
The basic scope of my project is:
We are running out of IP's on the 192.168.1.0/24 sunbnet so wanted to create a seperate VLAN/Subnet for physical workstations.
He is what I orginally did;
1) On our core switch; (Switch1)
     Create the VLAN,
     VLAN interface,
     DHCP pool,
     excluded address'
2) On second switch (Switch 2)
     Add VLAN name, no interface
3) I then updated the PO-group on Switch1 with new VLAN (this brought down the link before I was able to finish my config)
    Therefore I was not able to complete the following:
          add vlan to spanning-tree or updated OSPF routing
Here is what I assume to be the correct order?
1) On Core Switch (Switch 1)
     Create VLAN
     VLAN interface
     DHCP pool
     excluded address'
     add vlan to spanning-tree
     add vlan (passive interface) and sunbet to OSPF routing
2) On Switch 2
     Add vlan name/interfaces with no ip
3) Update PO groups after the above has been configured
     Add new VLAN to Po-Group on Switch 2
     Add new VLAN to Po-Group on Switch 1
4) Last steps
     Updated specific access ports with new VLAN and test
     upon completion of testing, update all other access ports connected ot workstations with new VLAN
Questions:
Did my links go down because I added new VLAN to Po-group BEFORE updating spanning-tree and OSPF routing?
Can anyone verify the order as outlined in the section "Here is what I assume to be the correct order"

So the order in which to apply TASKS is correct?
also just to clarify the following TASK based on your comments.
Step 4- Add new VLANs to OSPF as passive interface
On Switch 1 (core)
We have this line of code
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
TASK: OSPF - Add new VLANs(40 & 41) to OSPF as Passive Interface
******* Begin Here *********
config t
router ospf 100
passive-interface vlan40
passive-interface vlan41
!WE SHOULD ADD THIS LINE OF CODE
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
******* End Here *********
RESULT:
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan40
passive-interface Vlan41
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
Better??
Again thanks...your feedback have been a tremendous help!

I took a picture using camera plus app and the photo shows up in my camera roll; however, when I tap to view it a gray box shown instead. I tried to download the image and only the gray box shows. Can anyone help me?

I took a picture using camera plus app. The photo shows up in my camera roll as a thumbnail; however, when I tap to view the photo it comes up as a gray box. I tried downloading, emailing, and copying the picture, but it always saves as a gray box. Can anyone help me?

Hi Giorgiovdb!
Unfortunately I cannot help you; all I did was test for you.
I did an upgrade over my Lion install with Mountain Lion which went fine. I just tested icon view in my Finder on different files and folders and here in my installation all stays fine; good readable like in column view!
The only thing you might try is change your Font in Finder and set it back to the original afterwards!
I quickly Google'd how to change fonts in the Finder as appearantly there's no obvious gui item for it:
http://usermanifest.wordpress.com/2012/07/06/osx-finder-title-bar-font/
Try to see if it brings you anywhere!
At my post all fonts act normal after my upgrade to Mountain Lion; I don't do a clean install unless I really have to!
Goodluck!
Gaytan

I was syncing music to my phone and when i plugged it in my pictures were gone and left me with only the ones i had on my previous iphone how can i get them back

I was syncing music to my phone and when i plugged it in my pictures on my phone were gone and gave me the pictures i use to have on my old iphone how can i get my pictures back

This did not happen by syncing with iTunes alone. The Camera Roll is not included or touched with the iTunes sync process.
The first time you connect a new iPhone to iTunes that has been used to sync with another iPhone, you are prompted to transfer the backup for the other iPhone to the new iPhone, or set up as a new iPhone or don't transfer the backup for the previous or old iPhone. You chose the former, which replaced the Camera Roll on your new iPhone with the Camera Roll for your previous iPhone. This was followed by a sync with iTunes.
If you didn't import the photos from the Camera Roll on your new iPhone with your computer as with any other digital camera before you chose to transfer the backup for your old or previous iPhone to your new iPhone, the photos that were in the Camera Roll on your new iPhone are gone.

When printing document and comments output is only the comments

When I select Print document and comments (Ctrl+T)in Acrobat 6 and have my "Print with:" set as Documents and comments the output is only the comments with their location in the document. The original document however is not printed. How can I prevent this?

So, does the bursting process print completely independent of the style/driver setups in EBS? If that's the case, then I will have to check with my sysadmins on the printer setups on the Linux server like you mentioned.

When I go to my groups in Yahoo groups, and into Photos, and open a photo, only the Medium version shows, when I click on Large or Original, no pic opens-just title-

Similar Messages

Maybe you are looking for