When I open one particular folder to play the games in it the pointer turns into a pinwheel and I cant open the game or close the folder unless I shut down my computer. Never happened before and does not happen with any other folder on the desktop.
why does pointer become a pinwheel when I open one particular folder only and prevent me from opening the apps in it and then keep me from closing the folder unless I shut down the computer completely. I can open all other folders on the desk top without a problem. My game folder never gave me trouble before.
Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.
Similar Messages
-
Iphone 4S bluetooth does not connect with any other Bluetooth
Iphone 4S bluetooth does not connect with MacBookPro Bluetooth or any other Phone with Bluetooth. Can someone please help !!!
Hi There!
I am having the same problem, my brothers samsung picks up every bluetooth device thats remotely close but the 4s just sits there searching while sitting on the same desk as my iPad2, iMac 24" and headset that worked fine on my old 3 g.
I am not hugely tek savvy, can anyone explain in easy speak (the kid at the local apple reseeler told me the new bluetooth used on the 4s is not compatible with the older bluetooth devices.... hmmmmmm)
There must be a solution..... Thanks in advance -
What are the NEW features what comes with the iPhone 6, what does not come with any other iphone?
I just bought an iphone 6, and i was wondering what NEW features the iphone 6 has what does not come of the other iphones?
Click here for information.
(117357) -
Path does not chain with any of the trust anchors, but included in cacerts?
I have implemented a CA that has a self-signed certificate:<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE>
I have a cert from this CA: <CN=realAnonym>
With this cert, I want to make a SSL connection to some server with client authentication.
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> is included in the cacerts-file of the server.
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (Part of trusted CA's) in my opinion match with <CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (second certificate in certificatechain of <CN=realAnonym>).
But it doesn't ???
execute the server with -Djavax.net.debug=ssl,handshake gives:
<CN=GeoTrust Global CA, O=GeoTrust Inc., C=US>
<CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited,
OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net>
<CN=Equifax Secure Global eBusiness CA-1, O=Equifax Secure Inc., C=US>
<OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US
>
<CN=VeriSign Class 1 Public Primary Certification Authority - G3, OU="(c) 1999 V
eriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign
, Inc.", C=US>
<CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE> (Part of trusted CA's)<OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use only", OU=Class 2 Public Primary Certification Authority - G2, O="VeriSign, Inc.",
C=US>
<OU=VeriSign Trust Network, OU="(c) 1998 VeriSign, Inc. - For authorized use onl
y", OU=Class 1 Public Primary Certification Authority - G2, O="VeriSign, Inc.",
C=US>
*** ServerHelloDone
main, WRITE: TLSv1 Handshake, length = 7383
main, READ: TLSv1 Handshake, length = 3784
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=realAnonym (client certificate)Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 127355714484211456591612779667470666909980708602501730899657524388577
49850208930275081977822300971032883864332221450883863390126466833031349667099122
38288059447802849568096837640845268449147677304455823253593898716430967402259872
25271396467992796337646786345774935629264123070013042903682567551911526037603651
public exponent: 65537
Validity: [From: Fri Nov 18 00:00:00 CET 2005,
To: Fri Nov 03 12:04:28 CET 2006]
Issuer: C=BE, L=Leuven, O=KUL, OU=JurgenAgten, CN=ps (Clent certificate issuer) SerialNumber: [ 0107a404 7764]
Certificate Extensions: 3
[1]: ObjectId: 2.1.2.3.102 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 02 31 00 ..1.
[2]: ObjectId: 2.1.2.3.101 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 1D 31 1B 30 19 13 02 4C 64 02 02 03 E8 13 06 ..1.0...Ld......
0010: 61 7A 65 72 74 79 13 07 41 72 62 69 74 65 72 azerty..Arbiter
[3]: ObjectId: 2.1.2.3.100 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 82 09 F7 30 82 09 F3 03 82 09 6B 00 AC ED 00 ....0......k....
0010: 05 73 72 00 19 6A 61 76 61 78 2E 63 72 79 70 74 .sr..javax.crypt
0020: 6F 2E 53 65 61 6C 65 64 4F 62 6A 65 63 74 3E 36 o.SealedObject>6
0030: 3D A6 C3 B7 54 70 02 00 04 5B 00 0D 65 6E 63 6F =...Tp...[..enco
0040: 64 65 64 50 61 72 61 6D 73 74 00 02 5B 42 5B 00 dedParamst..[B[. .
09D0: C8 18 22 75 E9 23 56 96 9E 7E 71 C5 7B 6B 95 5B .."u.#V...q..k.[
09E0: DF AB 6D 0A 39 0C E3 74 F1 BA 5A 9C 50 76 0B 3E ..m.9..t..Z.Pv.>
09F0: 13 79 20 2E B5 B1 FC 83 76 97 A2 .y .....v..
Algorithm: [MD5withRSA]
Signature:
0000: 78 DC AF 04 6F D9 F2 54 6A 5D CB 99 4E 45 90 25 x...o..Tj]..NE.%
0010: 8D 4B 24 17 BF BB B9 1D AB 1D 7C EF 3D F5 01 9C .K$.........=...
0020: 49 9C 81 CC 64 0C F4 38 37 F5 BB CF 28 F7 FB 2F I...d..87...(../
0030: 5E 91 21 E3 A1 B0 92 90 F7 DC 92 F6 A8 6C E3 78 ^.!..........l.x
0040: 36 B7 36 B8 05 6B 17 8D C8 CF AF D2 9B F6 89 B2 6.6..k..........
0050: 5B 20 E4 14 0B 98 1C 50 69 FC CC C1 6F 6C F0 EA [ .....Pi...ol..
0060: 63 1E 64 71 BA 41 3D B6 23 7A 72 91 01 B4 B2 23 c.dq.A=.#zr....#
0070: 40 2D 62 48 E0 84 0E FA D7 EF E1 9C F5 92 DF 42 @-bH...........B
chain [1] = [
Version: V1
Subject: CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE (Client certificatechain[1] the CA) Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 117566584630083419996551735329369567910739541932314407531248741596590
25394436071793849489119529408325801928292164157908793562030900052755912331352764
88920380150146179015561996002426862508085279249965768014151302583170908492349232
49673303864165396475282399840755746956422674084689146502252850565325504345529883
public exponent: 65537
Validity: [From: Fri Nov 18 16:31:50 CET 2005,
To: Thu Feb 16 16:31:50 CET 2006]
Issuer: CN=ps, OU=JurgenAgten, O=KUL, L=Leuven, C=BE (is self-signed)SerialNumber: [ 437df3e6]
Algorithm: [MD5withRSA]
Signature:
0000: A5 0B D2 F7 C9 4A BF E5 00 C2 42 50 DF EB 33 A6 .....J....BP..3.
0010: DB 1A 7F C5 38 DE 4A FA 23 09 5C 09 5D 68 73 CD ....8.J.#.\.]hs.
0020: 72 B7 A4 9A 50 30 ED BE 35 28 6D 19 21 77 B6 32 r...P0..5(m.!w.2
0030: FE 83 22 CE EF 7F F4 3E 6E 52 B0 E9 9D 14 EA 48 .."....>nR.....H
0040: A4 0B DC 41 C2 86 D4 48 6A AD 49 46 84 10 FA 69 ...A...Hj.IF...i
0050: 7D C6 81 0C AF BA 88 D5 C1 30 BA 1A 5A E5 D3 24 .........0..Z..$
0060: 0A 3E 15 5A B5 99 A8 B2 32 80 85 D4 72 3F F4 60 .>.Z....2...r?.`
0070: 18 BA 11 3A 91 35 D9 F9 CA D3 C9 AE 2F 3E 39 E1 ...:.5....../>9.
main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
main, WRITE: TLSv1 Alert, length = 2
main, called closeSocket()
main, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: Path does not chain with any of the trust anchors
main, IOException in getSession(): javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: Path does not chain with any of the trust anchorsIt is not even done the first validation part on the client side ( if you have not cut the debugs).
On both, your client and your server, you should add your CA certificate to the trust set. You can first leave the client authentication aside, and do it on the client code to be sure the client authenticates the server's certificate properly; later you can add the same functionality to your server when checking the client certificate. The mechanism provided to deploy this, is either through system property javax.net.ssl.trustStore to introduce your truststore or introcuding your own trustmanager in the codes.
In case, you want to set it dynamically in the program code, you should consider using your extension of X509TrustManager() . Aussuming it be YourTrustManager, you go like this:
//YourTrustManager implements javax.net.ssl.X509TrustManager
SSLContext sslContext = SSLContext.getInstance("SSLv3");
YouTrustManager tm = new YourTrustManager();
TrustManager tms[] = {tm};
sslContext.init(null, tms, null);
HttpsURLConnection.setDefaultSSLSocketFactory(sslContext.getSocketFactory());Further, you might need to change the default hostname verifier on the HttpsConnection before you can establish a successful handshake with the pattern you used for your certificates.
Read http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html in case this does not make it clear enough. -
I'm facing a bit of a problem.
Any folder I copy from my Macbook Pro to my External Hard Disk does NOT appear on any other device that I connect the Hard Disk to (TV, PC, etc).
The Hard disk format is "MS-DOS (FAT)".
The folders that are copied from Macbook appear when I connect the Hard Disk to my Macbook only, yet, the folders that I copy from a PC to the Hard Disk appear on Macbook, PC, and TV and are also available from editing from both Mac and PC.
I was advised to install "Paragon" software and I did but I'm not sure how to use it to convert the folders on the hard drive to any format that can be read on other drives or devices (NTFS or otherwise).
I'd appreciate some help. Thank you.Hi Simon. How is it formatted, FAT or NTFS?
I only ask as OSX will only read NTFS partitions unless you install an App such as Paragon NTFS or Tuxera NTFS. -
After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-... -
why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked
Facetime only works via WiFi. Are you trying to set up Facetime with a T-Mobile account?
-
Error [38133] : does not join to any other logical table
Hi,
Is there a way to avoid this error. We dont have the requirement to join the table with any other table. The client wants to use
the OBI Answers functionality on a single table. No joins needed or wanted. Some hidden checkbox to avoid the OBI join-requirement?
ThanksHi,
Refer the below link.
Adding a single table without a logical join to another table (OBIEE 10g)
or,
To report on a single table: just drag/drop the table twice from the physical layer to the busines model layer. Then define a complex join (just drag/drop a line) between tablex and tablex#1. Define a key on the dimension table (the white colored folder).
You can then put one of the tables in a presentation folder and report.
Hope this help's
Thanks,
Satya ranki reddy
http://satyaobieesolutions.blogspot.in/ -
Membership rules does not work with UDF column name having the max length
Found a bug in OIM .
Membership rules does not work with UDF column name having the maximum length
Steps to Reproduce
1.Create a UDF having max column name length for eg UDF_USR_PERSONAL_SUB_DOMAIN_CO (lable = Personal Code)
2. Create a simple Rule like Personal Code = 7000
3. Assign this Rule as a member ship rule of a Group.
4. Create a user with Personal Code = 7000.
5. User doesnot get the group membership.
Thanks
SurenYes , i verified logs as well .
If you just decrease the column name length , w/o making change to any other attributes , it starts working ..
Thanks
Suren -
My i phone 3g s bluetooth does not pair with any phone
my iphone 3g s bluetooth does not pair with any otther i phone, i pad or other phones.
how can i solve the problem
thanks
sajalrmThere is nothing to solve. Pairin with another phone is not a supported BlueTooth protocol. The exception being pairing for some multi-player games.
Stedman -
Ical on iphone does not sync with ical on mac, but the mac does it!
My ical on my iphone does not sync with ical on mac using MobileMe, but reverse it works very well.
so typing an new event in ical on my phone will NOT appear in ical at my computer. Typing a new event on my mac, than within 10 seconds it appears on my phone.
anybody know how to resolve this? never had the problem before
problem 2: ical on my iphone seems to duplicate a lot of events. Non of them are duplicated on my computer.
related problem?
thank
HeinI have solved my problem - don't know if yours is the same. I noticed on iPhone, when I listed the calendars there are two sections: the top line showed "All Calendars ->"; when I click on that I get duplicate entries for everything.
Below that is:
"From My Mac.
"All from My Mac ->", followed by a list of individual calendars. When I clicked on that I got single entries.
This led me to realize that in my Settings ->Accounts I had the old "...mac.com" a/c and new "..me.com" a/c. I had thought it didn't matter.
Once I eliminated the "mac.com" A/c, I had only one set of calendars.
Hope this helps you.
Val J -
My ipod does not sync with itunes but still have the charging icon.
My ipod 4th Gen does not sync with itunes. However, the charging icon is there. I even check in My Computer and there is no iPod icon there. So, my iPod charges when i connect it with the usb prot but does not sync. Help me!!
Start:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
or
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
WAVE274 appliance not peering with any other WAAS appliances
Added new remote site today utilizing a WAVE274 appliance as the site only has three T1s. I'm using WCCP to redirect traffic to the appliance and wccp indicates that the appliance and router are communicating properly. The appliance resides on a different subnet from servers and is excluded from acceleration via WCCP access-list. For some reason the appliance is not peering with any of the other WAAS devices. The WAAS manager sees the appliance and is able to fully control it. All other sites are using either NME-WAEs or SM-SREs running WAAS. Previously I was using this WAVE274 at another location and replaced it with an NME-WAE so I know the appliance works. I've attached the topology. Any clues as to why it is not peering with at least the main site as there should always be traffic traversing to that site.
I have "ip wccp 62 redirect in" on all WAN interfaces and "ip wccp 61 redirect in" on all LAN interfaces on the routers.Hi David,
When you say the 274 appliance is not peering with other WAAS appliances, do you see the traffic as pass through.
What do you see immediately after when you initiate some connection from behind 274 to other sites and check the output of "show stat connection | in
Regards
Kiran -
Why won't my iPhone 6 charge with any other charger but the one it came with? please help!
My iPhone 6 won't charge with any other charger, can anyone explain why?
Make sure both the charger and connector are certified and that they are in good working order. Test them with another iPhone if possible. If the charger is working, then the problem might be the lighting connector port. Check and see if it is dirty. If not then there might be a hardware problem. Take the phone in to an Apple Store or authorized service provider for evaluation and possible replacement. Take the cable and charger as well.
-
DVI shutting down my computer- if dvi adapter connected will not re-start
I have a G4 12" Powerbook running Leopard 10.5.4. I just noticed that when I plug in an adapter for external video into my DVI port the computer flashes a blue screen then asks if I want to shutdown. before I can answer it turns off. This happens whether a monitor is attached or not. If I try to restart with the DVI adapter attached the computer shuts down before the startup is complete.
I use to use external monitors a lot but have not for the last 2 months when I went to try it will not work. What could be wrong??I installed the Mac OS X 10.7.3 Supplemental update 1.0 on 3/24/12 and now it won't wake from sleep when put to sleep from the Apple menu or energy saver time out. The not waking from sleep did not happen before the update. (Safari 5.1.4, Digital Camera Raw C ups 3.11, and iTunes updated at the same time) I didn't have any sleep problems with the previous 10.7.3 update install on 2/3/12
iMac 21.5 inch 2.5ghz i5 Mid 2011 Lion 10.7.3 11D50. Mouse and keyboard are hardwired, no bluetooth, no other USB or Firewire devices. I tried the PRAM and SMC resets, Bluetooth off, All Sharing off and nothing works.
Energy saver set to sleep = never, works for now; if it doesn't sleep - it can't wake from sleep, eh?
In any case: other users might consider holding off on the 10.7.3 update 1.0, because I didn't have the sleep problem before.
I'm wondering if I can revert to the previous version 10.7.3 with Time Machine, or if there is a fix I haven't come across searching the forums
Maybe you are looking for
-
How to change the channel on your router.
> this is for 10.7.4 Open Airport tuility on your comtpuer where to find it > : Applications folder > utilities > airport utility Clicked the apple router > click the edit button Clicke the wirless tab at the top and choose wirless options at the bo
-
I have an xml file titled config.xml that looks like this. <textChanges> <change id = "22833" whatToAdd = "\n\n" whereToAdd = "Front"></change> <change id = "22843" whatToAdd = "\n" whereToAdd = "End"></change> </textChanges> I'm processing
-
What classes do I need to make this "if" statement?
what classes do I use or how do write code that basically says: if ( the key typed was not enter) { I couldn't figure it out using the keylistener. Thanks in advance.
-
System.out Problem in Java Plug-in
I have the following problem, anyone can help me? I have an application( Frame ) needed to be embedded in applet. The applecation has a lot of information output to console( by System.out ). When I embeded it into applet, these information will be ou
-
Hi I have an assignement I have to make in java. My problem is that I cannot understand why the following code won't compile, the compiler sais that iterator method is wrong???? I use the iterator package from the libraries...i have a homogenous list