When I press "****" and r key capitol r dose not work.

When I press "****" and r key capitol r dose not work. I restarted my computer, and it did not solw the problem. I tried a wired keyboard and it dose the same.

Hi, thanks for tying to solw my problem. I found that I have set up 3 defferent keys to start defferent programs. I have assigned capitol "c" for start a gmail massege, "r" dose not do anything, and shift plus "g" also starts the gmail to creat masege.
I just do not remember where I did it in sys window I tried all the icons and no luck.
If you would know where to find the coresponding program to change it back please let me know.
Thanks

Similar Messages

When i try to use Command c it dose not work at all with any program but Command x and v works ?

when i try to use Command c it dose not work at all with any program but Command x and v works ?
i don't know what to do and how to fix it and why it habend ??????!!!!!!!!!

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(63123)

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution

Thanks for your response and good luck wishes, I suspect I will need them!
In principle, I agree re: the manufacturer's warranty. However, I am pretty upset that this is now my second iPod to develop a critical fault within weeks of the warranty expiring, and frankly, it is not unreasonable to expect a state-of-the-art $500 electronic device to last well beyond one year of life.
I agree talking to Apple is not likely to do me any good (the clue is in how impossible they make it to talk to them in the first place) - but that is not necessarily OK. I expect I will have to pay money to get the battery replaced - again, not OK (full stop - but especially given the cost of the device and the money I have spent with Apple). Yes, the batteries have a limited lifespan, but it should last longer than this (and surely, I should notice a gradual decline in its functionality, not an instant stop).
I will try Deggie's suggestion (see my reply post), but probably won't hold my breath (think I have already done this). I probably will have to get the new battery - and probably under my own steam. It is a principle at stake and I feel I should be able to let Apple know how I'm feeling - and am frustrated that they make this virtually impossible. It sends the very clear message that they are not interested in listening to their customers.

Body damage and left and right keys of keyboard is not working

Body damage and left and right keys of keyboard is not working...from where it fix it is possible to change the body and keyboard how much it cost?

Hello @harmankakkar ,
Welcome to the HP Forums!
I understand your notebook has taken on some damage to the chassis and keyboard.
You can find a full list of parts for the product, and the steps to replace them yourself in the Maintenance and Service guide available in the User Guide section on your products support page here: HP - Drivers & Downloads.
You will need your exact product or model number to access this information. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Using the part numbers will allow you to search both the HP Part Store and third party vendors (like eBay and Amazon) for the cheapest parts.
You may also want to consider contacting HP Phone Support as they can give you an exact quote on costs for repair to your notebook. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Z and v keys on wired keyboard not working

Been very pleased with the reliability of my 24" iMac to date, with very few (if any) problems worth mentioning till the last few days when the z and v keys on the fullsize aluminium keyboard originally supplied with the iMac no longer work?
Can anyone shed any light on why these keys refuse to work. Is it a case of throw the keyboard away, or is it a software issue?
I've rebuilt the permissions using Disk Utility which did find quite a few errors, but it didn't fix the problem of the missing Z and V buttons on the keyboard.
It may just be simply that the keyboard is worn out, but I'm no journalist and don't drink Coke or eat McDonalds burgers over the keyboard so see no reason why these particular keys have reason to stop working.
And please note, I'm typing this from the smaller wireless keypad which explains why I can still type the Z and V keys!

Thanks for the advice, I dug out my old G3 Mac keyboard, plugged it in, and it worked, so it is the keyboard that is faulty rather than the Mac - can't believe it's only lasted 5 years
Guess that it means a trip over to my local Apple Store to buy another keyboard, and knowing my luck, a few other items whilst I'm in there

I deleted iphoto and reinstall it but still dose not work

please help,,,
iphoto suddenly is not lunching i tried to delete the app and re install it from the disc that came with my mac
but still not working ?? and i dont know what to do any more
apprecciate your help

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
But are you sure that's the problem? This is often a Library rather than an app issue. Can you opn a new blank Library?
As a Test: Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Regards
TD

Macbook Pro suddenly turned off when fully charged and won't restart. Charger not working either coincidently

My 2 year old 13" MacbookPro suddenly turned off, presumably when the screen automatically dimmed (or went to sleep?) and now it won't turn back on. It was at 96% charge and now when I use the battery checker on the side, nothing shows up. No lights or anything. The charger doesn't seem to work either even after trying it on different outlets. This has never happened before but it has been harder to wake it from sleep in the last 6 months or so. I would have to push the On/Off button for a sec and the screen would turn back on. Also when I turn it on, the password screen is sometimes off-centered..weird.
I'm using Yosemite, the latest version..not sure what it is and can't check right now...I had to go use a PC to ask this question >_<

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao

WHEN I PRESS NAVIGTOR ON MY NOKIA 500 IS NOT WORKI...

PLEASE I NEED SOMEBODY TO HELP ME TO INSTALL SOFTWARE TO MY NOKIA 500 STEP BY STEP FROM GET GO ?
Solved!
Go to Solution.

Go back to the support page for this device. It will give you all the info needed for updating. It has a link for downloading software to your PC. Once this is done, the software is used to check your gps and see what version of firmware is loaded, and will compare it to the latest version. It will then allow you to download and install the latest on your gps.
http://www.nokiausa.com/A41435104
at the bottom of the page, you'll see the link allowing you to download the update wizard.
Message Edited by quattrog on 23-Dec-2008 04:07 PM

How do I stop my cursor from selecting things on the page? It shows up like I want to type something and when I press the down key it goes through all the words like its a word document.

How do I stop my cursor from selecting things on the page? It shows up like I want to type something and when I press the down key it goes through all the words like its a word document.
== This happened ==
Every time Firefox opened
== June 27, 2010

You have '''caret browsing''' enabled - that preference appears as set in your Troubleshooting Information.
http://kb.mozillazine.org/Accessibility.browsewithcaret
Hit the '''F7''' key to disable '''''caret browsing'''''.

Is there a way to adjust the Scroll bar? Because when I press the arrows key once it goes straight to the bottom of the page rather than going down gradually.

Before when I pressed the arrow key to navigate up and down the screen it would do it gradually. After I up graded to the current version it now skips down to the very bottom of the page.

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].<br />
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.<br />
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

When I compose an email it flies up the screen when I press the shift key. I've clicked default settings on Keyboard in Preferences but it has made no difference. It has only just started happening.

When I compose an email it flies up the screen when I press the shift key and then comes back again. I've clicked default settings on Keyboard in Preferences but it has made no difference. It has only just started happening. Any ideas?

This problem has also been plaguing me today. Here are my specifics and how I solved it (Expanding on what Quentin Holmes mentioned)
CONFIRMED WORK AROUND! The .m4v file gets created while encoding, but Adobe Media Encoder does not re-pack it back into the .mp4 unless you select the "Export Audio" in Adobe Premier export prior to queuing. If you don't want audio, mute the individual tracks and still export audio.
My details:
Just bought a GH4, shooting 4k 25fps MOV, trying to simply trim a few clips and export them as H.264 .mp4 with no audio. (By the way it would be nice if we could export 4k .MOV files from the camera back into .MOV once finished editing, but in premier that frame resolution is not supported)
Specs: Mac Mini, Quad Core i7, 16GB Ram, OSX 10.9.4, Adobe Premier Pro CS6 6.0.5, Adobe Media Encoder 6.0.2.81
Hope that helps anyone with the same prob

Why does this bar show up when I press the tilde key?

Hey all, I have this mysterious bar that shows up when i press the tilde key in AE. It's distracting.
https://www.flickr.com/photos/jeffbriant/14040981723/
(Adobe wouldn't let me upload a picture so I used flickr)
EDIT: I'm using a Mac desktop.

Try quitting After Effects, deleting the entire preferences directory, and restarting After Effects:
DRIVE/Users/USERNAME/Library/Preferences/Adobe/After Effects/

The utility's menu isn't coming up when I press and hold r and command after restarting

I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.

Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

My space bar only works when i press the alt key, help!

My space bar only works when i press the alt key, help!

I researched on here and my space bar was set for the speech function, now resolved...this site obviously works, nice one!

I can't get a capital c when I press the shift key, but I can get one with the with the caps lock key. Help

I can't get a capital c when I press the shift key, but I can get one with the with the caps lock key. Help

Hi
How its going?
I understand that you are not able to get the capital letter c.
I want you to change the keyboard and if you have got the warranty please replace at no charge.
Chetan

When I press "****" and r key capitol r dose not work.

Similar Messages

Maybe you are looking for