When I reload an HTM page using a SWF file like a   menu, the HTML page doesn't shows the SWF again!

Dear Sirs,
I hope to be directing my question into the correct forum's place.
I'm new in flash and I'm trying to make some tests
My problem is the following:
I included one SWF file into 3 HTM pages.
This SWF works as a little menu.
The SWF file (named "menu.swf") contains 3 items working as command buttons to access the three different HTM pages
Each HTM page contains the same "menu.SWF" file, some HTML text and one picture.
The swf contains:
Button 1 -> calls page1.htm using:
            on (press) {
            getURL("./page1.htm", "_top");
Button 2 -> calls page2.htm using:
            on (press) {
            getURL("./page2.htm", "_top");
Button 3 -> calls page3.htm using:
            on (press) {
            getURL("./page3.htm", "_top");
When I enter to "page1.htm" it appears correctly showing the swf file and all the HTML text.
It is OK.
But when I'm in "page1.htm" and I click on "Button1" (to reload "page1.htm") the only thing that I can see (after reloading page1) is the HTML text and the picture, but I cannot view the "menu.swf" file.
"menu.swf" remains in its place, but "invisible".
You can click on its command buttons, but anytime I click on the button that loads the same page (for example: "Button 1" to reload "page1.htm") the
swf file(s) doesn't appears.
The same thing happens when I'm in page 2 with Button 2 to reload page2 .htm, and so on.
How can I do to solve this problem?
Sorry for my not good english but I'm spanish speaker.
Thank you!
Gus

The path in the buttons is not correct once you navigate to the htm page.
So here you are on the landing page and the menu button says to get to "page1.htm" go up one folder level  (../) to the file page1.htm.
Now once you are up one level, either you loose access to the .swf because from that page the path to the .swf is not correct, or if the .swf does show, then the path in the buttons back to the other pages is not correct, because you are now one folder level higher.
If I am mis-reading your post and all pages are in the same folder, then remove the "../" part before the page name in the URL. Or perhaps you are using ./ to denote the current directory... I'd still suggest removing it. So the the getURL would look like this :
getURL("page1.htm", "_top");
if all pages are in the same folder.
And if I am reading your post correctly, then you cannot use the same button URL to get to ("./page1.htm", "_top"); and once on page1.htm use that same URL to get back down to your landing page.
So I'd say it's a pathing problem.
Give that a try and see if it helps.
Best wishes,
Adninjastrator

Similar Messages

  • When creating iframes for htm pages, I pdfs work just fine in all versions of Firefox. However, when I construct an iframe for an htm to be displayed on an htm

    ''duplicate of https://support.mozilla.org/en-US/questions/973637 - locking''
    When creating iframes for htm pages, I pdfs work just fine in all versions of Firefox. However, when I construct an iframe for an htm to be displayed on an htm, Firefox 24 will not load the htm/iframe.

    Hello,
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Error in SQL Query The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query

    hi Experts,
    while running SQL Query i am getting an error as
    The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query
    select  T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
    T2.LineText
    from OQUT T0  INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN
    QUT10 T2 ON T1.DocEntry = T2.DocEntry where T1.DocEntry='590'
    group by  T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
    ,T2.LineText
    how to resolve the issue

    Dear Meghanath,
    Please use the following query, Hope your purpose will serve.
    select  T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
    CAST(T2.LineText as nvarchar (MAX))[LineText]
    from OQUT T0  INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
    QUT10 T2 ON T1.DocEntry = T2.DocEntry --where T1.DocEntry='590'
    group by  T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
    ,CAST(T2.LineText as nvarchar (MAX))
    Regards,
    Amit

  • When I adjust an image I used to have a little icon on the bottom right of the image in the browser viewer indicating that the image had been adjusted. These icons are gone. How can i get them back?

    When I adjust an image I used to have a little icon on the bottom right in browser view indicating that the image was adjusted. These icons are gone now. How do I get them back?

    https://discussions.apple.com/message/15285822#15285822

  • I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

    I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

    Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Template splash page doesn't show up

    This is a new installation of iWEB on my 17" iMac and the template page doesn't show up. I am unable to add a page or create a new site from this point. I have a 24" iMac and when I start iWEB the templates page displays OK. I have reinstalled the software on the 17" and the templates still do not show up.

    Well, if you haven't installed iWeb 1.1.2 yet, don't just yet. What has solved this problem for people in the past is to actually download the full iWeb 1.1.1 updater image from Apple here...
    http://www.apple.com/support/downloads/iweb111.html
    Then install it right over the current installation. If you have already updated to 1.1.2, I don't believe you will be able to do this.
    If you have already updated to 1.1.2, I think your only choice right now (until Apple releases a full updater image) is to delete your current iWeb installation and then reinstall from the recovery disks that came with the computer.
    Let me know what your situation is and I can talk you through things more fully.

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • HT1338 I use  Outlook for my email, and about 90% of the time when I wont to attach a pdf or jpg file it failes and the email masage crashs. The only was I can get my Outlook to work is if I swich to Firefox.

    I use  Outlook for my email, and about 90% of the time when I want to attach a pdf or jpg file it failes and andout 50% of the time when I'm trying to send a standered text email I also failes and the email masage crashs. The only way I can get my Outlook to work is if I switch to Firefox. I would rater not have to swich all my bookmarks over to Firefox.
    Has any one eals had this problem?

    That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

  • The Pages doesn't show information when the application is deployed

    Why when I deployed one simple web fussion application (jdevelopper 11.1.1.0.0) with only one page with only one View Object to another web logic server (10.3) in another pc.
    The page show this:
    SvpClientesView1
    <span id="j_id_id7::content
    and doesn't show the form.
    When I run the application from embedded web logic server it works fine.

    Thank you so much for your response.
    The WLS's log show this error:
    ]] Root cause of ServletException.
    oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
    at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:253)
    at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:168)
    at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:546)
    at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:327)
    at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:104)
    Truncated. see log file for complete stacktrace
    java.sql.SQLException: ORA-01005: null password given; logon denied
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:116)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:177)
    I don't know what I should do to correct this error.
    Thank's.

  • When looking for a document, there used to be a "Today" tab on the left side of the Finder window. After updating my computer with the most recent update (I think it was Mountain Lion, but I could be wrong...), the "Today" tab seems to have disappeared.

    I really prefer using the "Today" tab instead of the "All My Files" tab, because it loads much faster and only shows me the documents that I want to see. Is there any possible way to get the "Today" tab back?

    In Finder, go command - F. On the top left set "Kind" to Date Created, finish selecting the criteria and hot "Save" on the top right. You'll get a new smart folder with an option to add it to the sidebar.

  • Crystal Report for VS 2010 -  The report page doesn't show in IIS

    Hi all, I get a problem with Crystal Report for VS 2010 (version 13).
    My website is built using VS 2010 (asp.net 4.0) and Crystal Report v13.
    It work okay when I run it in the VS 2010. But when I host my site in the IIS 7, when going to the page that contain the Report, the report show nothing.
    The page is blank except my button I've created to export the Report.
    The weird thing is when I click the my button (export to pdf), it doest export the correct pdf.
    Note that this happens in my development machine: windows 7 32bit.
    I've spent a day figure out problem but still haven't found the problem.
    Hope you can help me.

    Let's start with the viewer. Sounds like the viewer directory is not configured correctly. Use [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article as a guide on how to do this.
    I still do not have info on the following:
    it means even though the crystal report viewer doesn't show, i still can export it's content to pdf.
    With all due respect, think of it this way;
    You're the mechanic. I'm a guy with a car. I text you; I'm sitting in my car. It will not get me to point A. Fix it.
    In a nut shell, that is what you are asking me to do with the export. The more detail you provide, the better. See if you can provide the info re export I requested in my previous post.
    Ludek

  • Is it possible to reserve a space on the time capsule to use to share files like; music, pictures, or documents?

    There are 4 Mac's in my house and I'd like to back up all of them to a time capsule, i know it is possible to do this. however i would also like to be able to dump files like; music, pictures, and documents onto the time capsule so that the others mac will be able to access these files when they want to. This will stop the need for me leaving my mac on whilst other macs access my hard drive, or passing USB sticks around the house.

    With an ordinary disk you can partition it with Disk Utility to reserve space for various things. With the Time Capsule you cannot partition it because Disk Utility doesn't work on networked drives and AirPort Utility can only format an entire Time Capsule, not paritition it.
    You can simply store the files you want to share on the Time Capsule and turn on file sharing, and it will do what you want. The only downside is that because you can't reserve space, eventually the Time Machine backup(s) on it will reduce the amount of available space to zero. This would eventually happen anyway whether you store your files on there or not, and then Time Machine starts deleting the oldest backups, but if you store your files on there and space goes to zero people won't be able to add files.
    I'm not sure about the "not powered" part. For many months I stored an iTunes library and music on a USB hard drive that was powered off the Time Capsule USB port. Of course, I did this so that the music would be accessible anywhere in the home. I swear that the external drive never used its own power cable. It was a portable bus-powered USB enclosure with a laptop-sized drive in it, though, so it normally does not require a power cable. If the files you need to share aren't too large, you might think about plugging in a USB stick drive which would be very compact, needs little power, inexpensive, and has no moving parts to break or heat up.

  • Podcast page doesn't show all episodes???

    Hi, I maintain a video-podcast for a Dutch bookshop. A while ago I updated the RSS-feed with new episodes. However, they won't show up in the list of my podcast: http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=130908598
    When you subscribe, you'll see all 8 episodes, but on the main page, it only shows 4...
    Feedvalidator claims my feed is OK:
    www.stainlessmedia.com/paagman/podcast.xml
    Anyone got any ideas?
    Thanx, Taco

    solved

  • I have problem that seems to be Firefox-specific: the url loads correctly but the page doesn't show. The other browsers are unaffected.

    The page urls load properly but the pages generally don't show. I have been using Firefox 5 on Linux Mint 11. I have no idea which Firefox version I have on the Windows 7 PC as the Firefox "About Firefox" page doesn't display. Some web pages don't seem to be affected by the Firefox problem. As a workaround, I am using non-Firefox browsers like: on Linux- Konqueror, Opera, Seamonkey, Chrome; on Windows: Internet Explorer, Opera, Chrome; the iPod Safari and Android browser.

    Upgrade your browser to Firefox 8
    * getfirefox.com

Maybe you are looking for

  • How many devices can I have in my support profile?

    How many devices can I have in my support profile?  I have 24 and can not add any more.  I just tried to add a new iPhone and it says the serial number, "We're sorry, but this serial number is either invalid or it is for Apple software or accessories

  • How do i sync my iPod Touch to iTunes?

    My ipod touch is disabled and it says to connect to itunes,so i connect the ipod to the computer but it wont sync,i dont know if its cause i dont have itunes version 10.5 or something else,please help,i havent been able to do things on my ipod for a

  • 3.0 Doesn't Check Multiple Mail Accounts at Once

    When I was running 2.1 and went into mail, it checked all my e-mail accounts simultaneously. Now I have to go into each one individually. Anyone else seeing the same thing? TIA, Jen

  • I keep getting a revocation of certificate prompt when using Skype.

    Since both Microsoft & Mozilla updated their security, every time I log onto Skype I get a Revocation of Certificate prompt. How do I fix or eliminate this on Skype?

  • APO-DP/SNP production support issus

    Hi sap gures    this is suresh in APO-DP/SNP production support,which kind of errors we got regularly and how to troubleshoot and how to resolve it , please tell me .i am new for the production support Regards Suresh Kumar