When LOV does not return the value

Check that you are not calling setText(String) on the web bean to set the default value. It causes your bean to no longer draw the value from the underlying VO. One of the symptoms is that selecting a value from the LOV modal window will not return that value to the base page. (The value from the LOV will actually be set on the VO, but the UI won't reflect it.)
Setting the default value in the model layer is prefered. You can do this by overriding the create(AttributeList nameValuePair) method of OAEntityImpl or OAViewRowImpl.
If, for some reason, you need to set the default value from the client side, you need to call setText with the pageContext, e.g., setText(pageContext, "myDefault");

Hello
Upon giving your question further thought I think that you would be better off if you added an 'id' column to table T1 and referenced this 'id' column in table T2 . Something like
Table_T1(id number, c1 varchar2(100)
and
Table_T2(.other_columns.. ,t1_id)
Your LOV will now be select c1 display,id return from table_t1The column t1_id will be defined to use this LOV.
You will need no other modifications to the form on table_t2
Varad

Similar Messages

LOV does not return the value (2)

PPR in general does not work correctly if invalid HTML is generated. One example of an invalid HTML is having an opening <TD> tag immediately following another opening <TD> tag.
After checking everything else, if LOV still does not return the value, test whether it's not a problem with the invalid HTML by placing the messageLovInput outside of the complicated layout nestings you may have. If it works outside of the layout nestings, look for the possible problems in the layout nestings.

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

LOV does not return the value (1)

Avoid calling setText on the web bean to set the default value. It causes your bean to no longer draw the value from the underlying VO. One of the symptoms is that selecting a value from the LOV modal window will not return that value to the base page. (The value from the LOV will actually be set on the VO, but the UI won't reflect it.)
Setting the default value in the model layer is prefered. You can do this by overriding the create(AttributeList nameValuePair) method of OAEntityImpl or OAViewRowImpl.
If, for some reason, you need to set the default value from the client side, you need to call setText with the pageContext, e.g., setText(pageContext, "myDefault");

Hi RamKumar,
Thanks for your reply.. I have already done that but no luck :(
Regards,
Hemanth J

Custom Integrator - Date Picker/LOV does not return a value to the cell

Hi,
I have configured a webADI template with a date picker in it. Though the picker is rendered when i double-click on the cell, the selected date is not populated back. Same happens for any other list of values may render in the integrator. Any suggestions on debugging this issue.
Regards,
Vinayaka

I have got the LOV working now. The issue was that I had not provided the table-select-column with the interface column name. It was set to the table column name.
Regards,
Vinayaka

P_session.get_value call does not return the value

I have a form on a table.
After the doInsert call in the pl/sql event handler section of the insert button, I have the sql statement
"insert into temp
values(56,p_session.get_value_as_varchar2('DEFAULT','A_FIRST_NAME'));"
However, the value the call p_session.get_value_as_varchar2('DEFAULT','A_FIRST_NAME') returns is always null.
Any comments?
Thanks in advance.
null

When I user get_value_as_varchar2
function then i get following error
Anybody knows about solving a problem
code works fine for number data.
if i try to access varchar2 column then i get error.
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
(WWV-00000)
The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.8723279877 (WWC-51000)
(WWC-00000)
anybody knows please give reply its urgent..
thanks in advance
Yogesh
null

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Why is the giving me this error (method does not return a value) PLEASE !!

I have this code and it is giving me this error and I don't know how to fix it
can anyone out there tell me why
I have included the next line of code as I have had problems in the curly brackets in the past.
The error is
"Client.java": Error #: 466 : method does not return a value at line 941, column 3
Please help
THX TO ALL
private Date DOBFormat()
    try
      if
        (MonthjComboBox.getSelectedItem().equals("") ||
         DayjComboBox.getSelectedItem().equals("") ||
         YearjComboBox.getSelectedItem().equals("")){
      else
        String dateString = StringFromDateFields();
        SimpleDateFormat df = new SimpleDateFormat("dd/mm/yyyy");
        Date d = df.parse(StringFromDateFields());
        System.out.println("date="+d);
        return d;
    catch (ParseException pe)
      String d= System.getProperty("line.separator");
      JOptionPane.showMessageDialog( this,
       "Date format needs to be DD/MM/YYYY,"+ d +
       "You have enterd: "+ StringFromDateFields()   + d +
       "Please change the Date", "Date Format Error",
       JOptionPane.WARNING_MESSAGE);
      return null;
//File | Exit action performed
public void jMenuFileExit_actionPerformed(ActionEvent e) {
System.exit(0);
}

Fixed it needed to have a return null;
this is the code
if
        (MonthjComboBox.getSelectedItem().equals("") ||
         DayjComboBox.getSelectedItem().equals("") ||
         YearjComboBox.getSelectedItem().equals("")){
        return null;

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Function does not return a value

CREATE OR REPLACE PACKAGE BODY Promo_Version_Logo_Pkg IS
FUNCTION Promo_Version_Logo_Rule(Rc IN test.Ot_Rule_Context)
    RETURN Ot_Rule_Activation_Result
   IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    v_Result NUMBER;
    CURSOR Cur_Promo_Logos IS
      SELECT Pvlo.Promo_Id,
             Evt.On_Date,
             Evt.Channel_Id,
             Evt.Start_Time,
             Evt.Duration,
             Pvlo.Logo_Id
        FROM Event                  Evt,
             Event_Technical_Data   Etd,
             Promo_Version_Logo_Opt Pvlo,
             Promo_Timing           Pt
       WHERE Evt.Event_Technical_Data_Id = Etd.Event_Technical_Data_Id
             AND Etd.Promo_Timing_Id = Pt.Promo_Timing_Id
             AND Pt.Promo_Timing_Id = Pvlo.Promo_Timing_Id
             AND Evt.Channel_Id = Rc.Channelid
             AND Evt.On_Date >= Rc.Fromdate
             AND Evt.On_Date <= Rc.Todate
             AND Evt.Day_Type_Id = Rc.Daytype;
BEGIN
    FOR Each_Record IN Cur_Promo_Logos LOOP
      v_Result := Testing_Pkg.Insert_Event(v_Channel_Id   => Each_Record.Channel_Id,
                                                       v_Tx_Time      => Each_Record.Start_Time,
                                                       v_Tx_Date      => Each_Record.On_Date,
                                                       v_Content_Id   => Each_Record.Logo_Id,
                                                       v_Duration     => Each_Record.Duration,
                                                       v_Event_Type   => Uktv_Tools_Pkg.c_Logo_Kind_Code,
                                                       v_Container_Id => Each_Record.Promo_Id);
      IF v_Result = -1
      THEN
        EXIT;
      END IF;
    END LOOP;
END Promo_Version_Logo_Rule;
END Promo_Version_Logo_Pkg;why do I get this "Hint: Function 'Promo_Version_Logo_Rule' does not return a value" after I compile it? The Testing_Pkg.Insert_Event should insert some values somewhere...I just want to try to test it before I move on onto the next bit of it, but I do not understand what I am doing wrong...
Thanks

You need something like:
    END LOOP;
    RETURN v_Result; -- if this is what you are trying to get the function to do
    EXCEPTION
      WHEN OTHERS THEN
      <exception handling/logging - whatever you want>
      RAISE; --this with then raise an error back to the calling process
END Promo_Version_Logo_Rule;This way the function either returns a value, or an exception which can be handled in the calling procedure

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

The report does not accept the value for apps.fnd_profile.value('USER_ID')

Hi,
I followed the below note and added a report to my SSHR menu.
How To Add A Report To A 11i Self Service Menu [ID 334847.1]
In my report , I have a condition in the query
and a.created_by =apps.fnd_profile.value('USER_ID')
When the report is submitted as a request , it works fine., however the same report when called from the self service page does not accept any value for apps.fnd_profile.value('USER_ID') .
Is there a workaround to handle this problem.
regards

hi,
I had already tried the option apps.fnd_global.USER_ID too.
However it does not accept the value for apps.fnd_global.USER_ID.
We want to call the reports in SSHR using oaf and at the same time the records that are pending for approval created by the employee should only be visible.
regards
Maya

Imqobjmgr does not recognize the value of java.naming.provider.url property

On Windows, I am running imqobjmgr 4.3
when I run imqobjmgr -i list.properties, I am getting the following error
Error [A3052]: imqobjmgr does not recognize the value of java.naming.provider.url property.
Why is that?
classpath
C:\Sun\SDK\imq\lib\jms.jar;C:\Sun\SDK\imq\lib\imq.jar;C:\Sun\SDK\imq\lib\fsconte
xt.jar;.
contents of list.properties
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
# Copyright 2000-2008 Sun Microsystems, Inc. All rights reserved.
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License ("CDDL") (collectively, the "License"). You may
# not use this file except in compliance with the License. You can obtain
# a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
# or mq/legal/LICENSE.txt. See the License for the specific language
# governing permissions and limitations under the License.
# When distributing the software, include this License Header Notice in each
# file and include the License file at mq/legal/LICENSE.txt. Sun designates
# this particular file as subject to the "Classpath" exception as provided by
# Sun in the GPL Version 2 section of the License file that accompanied this
# code. If applicable, add the following below the License Header, with the
# fields enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyrighted [year] [name of copyright owner]"
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright holder.
# @(#)list.properties 1.11 07/02/07
# This property file will list administered objects
# Version of command file
# NOTE: This is not the version of the Sun Java(tm) System Message Queue product
version=2.0
cmdtype=list
# If you want to only list a particular type of administered
# object, uncomment the following line and specify the type.
# Acceptable values for the type property are: t, q, tf, and qf,
# where t = topic, q = queue, tf = topic connection factory, and
# qf = queue connection factory.
#obj.type=
# To use the LDAP service provider implementation from
# Sun Microsystems, uncomment the following two property lines
# and set the url property correctly.
objstore.attrs.java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory
objstore.attrs.java.naming.provider.url=ldap://localhost:389/ou=imqobjmgr,o=sun.com
# To use the File System service provider implementation from
# Sun Microsystems on Solaris, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///home/foo/imq_admin_objects
# To use the File System service provider implementation from
# Sun Microsystems on Windows, uncomment the following two
# property lines and set the url property correctly.
# *** Note that the url syntax here is platform specific. ***
#objstore.attrs.java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
#objstore.attrs.java.naming.provider.url=file:///C:/imq_admin_objects
#objstore.attrs.java.naming.security.authentication=
#objstore.attrs.java.naming.security.principal=
#objstore.attrs.java.naming.security.credentials=

I see you're using Sun Java System Message Queue. There's a forum specific to that product over at [http://forums.sun.com/forum.jspa?forumID=711&start=0|http://forums.sun.com/forum.jspa?forumID=711&start=0] . You could try asking there.
Nigel

Asking the Bridge Team: Bridge "working color space" setting when one does not have the Suite?

Common sense tells me there is really no such thing as a
"working color space" in Bridge, because
Bridge is not an image editor, just a browser
Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
Is there a way to set the Bridge
"color settings" when one does not have the suite?
The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
(not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
But what if I wanted Bridge to assume my
Photoshop color working space for untagged images
so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
there is really no such thing as a
"working color space" in Bridge, because Bridge is not an image editor, just a browser.
Thanks in advance.

Hi Ramón,
Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
How do I report this to the Colour Police at Adobe?!?

In a purchase order for 3 GR's Quantity does not equal the value

Hi,
I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value. How has this happened?
Any guesses why the difference has come.
Thanks&regards,
Veena

Hi Vishal,
In po history for agt 3 Gr's Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
Can you tell me this which T.code.
Tx,

When LOV does not return the value

Similar Messages

Maybe you are looking for