When plguging my iPad into my mac nothing happens at all. looking at iTunes there is no devices and I can't add any. Hope you can help. Vic Donovan

When plguging my iPad into my mac nothing happens at all. looking at iTunes there is no devices and I can't add any. Hope you can help. Vic Donovan

If you are using iTunes version 11...
See Here first...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/
If no joy... See these 2 links...
For Mac  >  http://support.apple.com/kb/ts1591
iPhone not appearing in iTunes

Similar Messages

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

  • Ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    Hello,
    This will fix your problem!
    To put the device in DFU mode,
    1. Connect the device to iTunes
    2. Hold both the power button and the home button down simultaneously
    3. After 10 seconds, release the power button but leave the home button pressed
    4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
    That should get you back on your way.
    ~Lt. Leviathan

  • HT1304 why dont i get a popup when i click to play a video, nothing happens at all, on my pc.

    Whay dont i get a popup when i click to play a video in itunes on my pc. nothing happens at all.

    I have been running Firefox for over 2 years on my Win 7 64 bit machine. This AM, I cannot start it. I get a message that it crashed & have option to Restart FF> When I click that I get option to start in safe mode. I cannot get it ti run in normal mode. I uninstalled & re-installed. Did not work. I uninstalled again & re-installed while Win 7 was in Safe Mode. It seemed t install & run fine. Rebooted & same thing.
    Kinda frustrating. Any ideas?

  • When I plug my ipad into my computer nothing happens

    I have the ipad 2 and I cnat sync it to my computer.
    I have the latest update of itunes and nothing happens when I plug it in
    How can I sync my music and make the computer recognise it?
    Thank you

    Keep in mind, the new iTunes is in a different format.  To revert to a more familiar format:
    In the top menu bar in iTunes, select
    1.  View
    2.  Show sidebar
    Is the device now on the more familiar left hand pane or still not recognized?
    iOS device not recognized by iTunes (Mac) - http://support.apple.com/kb/TS1591.
    iOS device not recognized by iTunes (Windows) - http://support.apple.com/kb/TS1538.

  • My ipod touch is showing the connect to itunes, however, when i plug it into the computer nothing happens, what can I do?

    My Ipod Touch is telling me to connect to itunes, however when I do nothing happens, what can i do?

    Try:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Also try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I have an error message when connecting my ipad to my laptop suggesting I need 64bit version of itunes. After repeatedly downloading and reinstalling Im still getting the same message. Any suggestions please?

    When connecting my ipad mini to my lap top I keep getting an error message sugesting I need to install 64bit version of Itunes. I have done this repeatedly but the same message keeps recurring. Cananyone help? Thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I was trying to update my Ipad to IOS 8, the screen is all black with the apple logo on it and the progress bar is stuck,

    I was trying to update my Ipad to IOS 8, the screen is all black with the apple logo on it and the progress bar is stuck.
    I can't turn it off, and when i connect it to itunes, it doesn't display

    Try putting the iPad in restore mode and see if iTunes recognizes it. The steps are below:
    Turn your iPad off.
    Hold down the Home button and plug it into your computer. Keep holding the Home button until you see a screen telling you to connect to iTunes.
    iTunes should show you a popup saying that there is an iPad that is in Recovery Mode and needs to be restored before you can use it. Click OK.
    Click on Restore iPad

  • Can't add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

    I have 2 email accounts Gmail and Bell mail. I can add mailboxes to gmail but when I try the same procedure with Bell mail I don't get an edit button so can't add any mailboxes.

    Mailboxes can be added only to IMAP accounts. Is Bell setup as IMPAP or POP?

  • My ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.

    my ipad mini has water damage but when I plug into wall it says to connect to itunes. When I plug into Mac nothing happens. Not even a charging sign and nothing happens with itunes. Computer doesn't recognize it's plugged in.

    If moisture got inside, it may have shorted the iPad's electronics.
    Solutions for wet iPad.
    http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
    http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
     Cheers, Tom

  • I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port

    I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port

    Try:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not omit the Additional Information paragraph.
    Is the iPod that connects an iPod touch? If not that does not mean anything since iOS devices like iPod touch, iPhone and iPad use different drivers than other iPods.

  • My Apple TV stalled during an update and now just shows an image of it being plugged into a USB. It won't complete the update and does nothing when I plug it into my Mac via USB.

    2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
    The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
    Any Ideas? I am starting to think I need to replace them. Thanks.

    Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
    now, press the power button on the ipad until it turns off.
    Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
    Keep holding the home button until you see the recovery mode message pop on the itunes window.
    When that happens, you should now be able to restore.

  • When I plug my iPad into my Mac it will not sync

    When I plug my iPad into my Mac it will not sync and my iPad will not charge. I've used every chord that I own. In addition, I've plug other things into my Mac and they work fine. If I plug my iPad into the wall it charges.

    Then it doesn't seem like its the cable then does it.
    If the iPad isn't being recognized in iTunes, you can start with something very simple. Quit iTunes, reboot your iPad, restart your Mac and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If it still isn't being seen by iTunes, look for help here.
    http://support.apple.com/kb/TS1591
    Or here.
    http://support.apple.com/kb/TS3540

  • When I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    If you are using Windows 7, go to:
    Control Panel>Programs>Programs and Features
    Look for a program called 'Apple Mobile Device Support'
    Right-click on it
    Click 'repair'
    Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me.

  • My mac book air is stuck on the log in page. When I type in the correct password, nothing happens. How can I get into my laptop??

    I Have the latest iOS installment I believe. I don't know what is causing the problem as it was working perfectly last night! When I type in an incorrect password, the laptop recognizes that it is incorrect and denies me access. But when I type in the correct password nothing happens. I've turned the computer on and off and tried connecting to power also.

    Really?
    How about:  MacBook Air
    or:  OS X Mavericks

Maybe you are looking for

  • IEnumerable T Property as parameter in Lambda Expression

    Hi, I have following construction which returns selected items from the list: public IEnumerable<Country> SelectedProducts get return this.Countries.Where(c => c.ContinentName.Equals("Product Catalog") && c.IsSelected); }The following construction fo

  • Error while compiling java file using J2SE 1.5.0

    Dear Sir, I'm getting the following error while compiling the java file.The code is also given. package test; public class TestRowSet { public TestRowSet() { "TestRowSet.java": cannot access java.lang.Object,bad class file: D:\Program Files\Java\jdk1

  • DataGrid Moving rows up and down

    I have this function to move rows up in a datagrid , yet i am having problems when it comes to move to rows down. I have tried changing the following line to +1 but it dint work any hints please.             ac.addItemAt(itemToShift,dg.selectedIndex-

  • High Response Times with 50 content items in a Publisher 6.5 portlet

    Folks, Have set up a load test, running with a single user, in which new News Article content items are inserted into a Publisher 6.5 portlet created of the News Portlet template. Inserts have good response times through 25 or so content items in the

  • CATW and CAT2 Transactions

    Hello, Could someone tell me the main differences between both transactions? I know CATW is an Easy Web transaction and CAT2 isn't. But when I'm launching CATW transaction in a web browser, all the fields are misplaced and I can't do anything. What'r