When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed
When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.
Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.
Similar Messages
-
I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
Camera works, with the side buttons it takes pictures.
Although I'm not able to see on the screen.
MikeFirst try a restore from backup
If problem still occurs try a restore to factory defaults/new Pod.
If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order. -
When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?
You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer. -
I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you
Check here > OS X Mavericks: System Requirements
-
I have an iPhone 5 IOS 8.1.2;
for the past 13 weeks I get the message that "this phone has not been backed up on the cloud". However, every night it is connected to wifi, phone is connected to power, and the screen is locked. Any idea why back-up is not happening ? By the way, I do not have the "back up now" option in Setting / iCloud.. Help anyone ?Try deleting an other icloud backup and see if it will automatically backup.
-
I'm 51 years old and recently retired. I have a new IPad Air. Which MacBook should I buy to go with it? I don't understand flash storage. It feels like I would have a bunch of flash drives to keep up with. Help an old lady out!!!
Depends on how you want to use it. Flash storage on the newer macbook and macbook air are built in. A macbook air is the most light weight and a very good machine. It will do all you want it to do unless you are running some very intensive programs. If you go to the apple store on line you can compare the different macbook pro" and macbook Air's.
-
When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
i was woundering if apple fix ipod touches when they are not a year old and its bing cracked
A broken screen is not covered by the warranty since it is not due to a defect. Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing -
Don't bother trying to get Airplay to work even if you have all the latest updates etc..if your computer is a MacBook Pro 2008 or earlier..The Apple staff have decided they are too old and not worth supporting...
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.
Patrick is either mistaken or describing basic airplay and not mirroring. -
I have an ipod Classic 80G. It is a few years old and hasnt been used for a while. I have just tried to sync it to my new Mac and it says theat thei ipod is synced with another itunes account!!!
It was orriganally managed through my old pc but as far as i am aware the itunes account is the same. If i sync with my mac it will remove all that is in the Classsic and replace it with current itunes!
How can i get round this ?Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes -
Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
LizBelieve it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet? -
I have an iMac 27" which is 4 years old and probably overdue for a clean-up. Is there any good reliable software out there that would help?
Has anyone had any experience of 'Mackeeper'?Check how many applications are starting when you log in, I found that if there was a lot of activity at login Finder did not display the icons on the desktop correctly, again like you it did not occur at every login, just occasionally.
For Safari have you tried resetting Safari, if that does not help you could disable plugins and extensions one at a time. You may find one of those is causing the problem. -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!
You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store
Maybe you are looking for
-
Regarding purchase order report in bw
Hi guys, I have a requirement for report in bw. I am getting data form datasources from po header and item level. In the report i have to show Purchase order quantity, Goods recived quantity, MRP and goods reciept value. Can u tell me
-
Errors in Offline Backup via DB13 SAP & Oracle on Linux
OS: Linux Database : Oracle Systems Affected : Production & Disaster Recovery Server Hi We have offline backup scheduled every friday via SAP the backup runs fine & copies all the files in the backup directory but when i go see the backup logs in DB
-
ORA-06502 in pl/sql code after converting from 9i to 10g
Code worked in 9i, fails in 10g (v10.1.2.0.3) with "character buffer too small": v_period varchar2(6); select max(period) into v_period from fiscal_periods; PERIOD in the table is CHAR(6), representing yyyymm. I've discovered two workarounds: 1) Decl
-
Manually Search through sparsebundle files with finder
Is there any way I can view the files of a sparsebundle file like opening a tar/zip file in finder?
-
ADF After Partial Update Event
Hi im developing an ADF application. My Jdev version is 11.1.2.3.0. I'm using Partial Update with ADF Panel Form element. I need a javascript event/listener when Panel Forms' all content refreshed with PPR. How can handle this?