When traveling in Europe, Im thinking of using the converter with the apple charger (110-240) to make sure i dont burn it out....will that work?

when traveling in Europe, Im thinking of using a power converter with my apple charger(110-240) to make sure i dont burn out my ipad mini or iphone 5.
will that work?

It is not necessary
Apple power supplies are made to use from 110 to 230 volts without any converter required
You will need adapters to get the pins to fit the wall sockets but that is it
Allan

Similar Messages

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

Is there a special inverter to use with my MacBook Pro when traveling in Europe?

Is there a special inverter to use with my MacBook Pro when traveling in Europe?

No, it will handle the voltages there:
From http://www.apple.com/macbookpro/specs.html
Electrical and operating requirements:
Line voltage: 100V to 240V AC
Frequency: 50Hz to 60Hz
You might need a plug adapter to change the pin shape in some countries.

I have an IPad Air with wifi only. What do I have to do when traveling in Europe to receive wifi?

I have an IPad Air with wifi only. What do I have to do when traveling in Europe to receive wifi?

You have to locate acessible WiFi networks. Most major hotels now have WiFi.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

I bought a new computer, and i have transfered everything using home share, file transfers, etc.. yet still when i go to sync, itunes tells me ipod can only be synced with one computer... is there a way to retire the relationship with the old computer?

i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..

if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it.

My primary reason for buying an iPad is for travel in Europe. I live in an area of the US where Verizon rules. Is Verizon's 3G model good for international travel? I'm hearing conflicting views.

My primary reason for buying an iPad is for travel in Europe. I live in an area of the US where Verizon rules. Is Verizon's 3G model good for international travel? I'm hearing conflicting views. Any advice appreciated.

Verizon uses CDMA.
The rest of the world uses GSM.
The wifi will work, if you find a hotspot.
The 3G will not, unless south Korea moves to Europe.

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

When I try to sign in to iTunes, it tells me that my Apple ID has not yet been used with the iTunes Store. How do I use my account with the iTunes Store?

Hello Daijalove97,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
To use your Apple ID at the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In from the Store menu.
Enter your Apple ID and password, then click Sign In.
Click Review when asked to review your information.
Enter your billing information, a credit card will be required.
Click Continue when you're done entering your credit card and billing information.
Best of luck,
Mario

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

When travelling from US to UK and France what do I need to charge macbook and iPhone?

When travelling from US to UK and France what do I need to charge macbook and iPhone?

Just a pin converter and your Apple US Power adapters (100-240v 50/60Hz)
The European sockets take 2 x round pins, adapter available from in most drug stores carrying travel aids as is the UK pin converter.
UK is heavier 3 x rectangular pins

HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

Try restarting your router as a first thing, this sometimes works for me.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
Ernest

Not sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server

When traveling in Europe, Im thinking of using the converter with the apple charger (110-240) to make sure i dont burn it out....will that work?

Similar Messages

Maybe you are looking for