When viewing slideshow my photo playlist stops and randomly plays for a view seconds only
When I go to view a slideshow of photos the playlist I assigned to play either doesn't play or randomly kicks in during slideshow. I have assigned several different playlist to my photo slideshow and they all do the same thing. I am connected to a Mac. No problems with pictures just my playlist.
When I say playlist I mean music playlist.
Similar Messages
-
I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?
If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.
-
When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes. Resulting in me having to reboot the system again and going through the disc checks to resolve errors. This has happened on several occasions. On previous occasions when I have not had any photos on my ipad it has connected to my computer without any problem.Is there a way of solving this problem without having to remove all of my photos from my ipad.
Being recognized as a camera is normal. Your computer sees the DCIM folder and doesn't know the difference between a 'real' camera and an iPad.
One way to stop it could be to tell windows explorer what to do. When you plug your iPad in do you see a little pop up window listing things to do with the device? If so, there should be an option to 'do nothing', which means you tell your computer 'hey, ignore this device'. Your iTUnes will still work when you connect them, the windows protocols that search for images, etc. should just let it be and hopefully stop the crashing. -
When I recaption a photo in IPhoto and then transfer to Photo Stream, the new caption is not transferred and the original Photo ID shows. Is there any way to have the new caption show up in Photo Stream with a transferred photo?
No. Recaptioning only add a title to a photo and does not change the actual file name. You could export the photo outside of iPhoto with the option to use the title as the new file name, reimport into iPhoto and then add to PhotoStream. But that may be more of a hassle than you wnat to go thru.
OT -
Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge it then the white square reappears. I do not believe the squares are saved
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325 -
When I edit a photo in iphoto and then try to email it, sometimes the edit does not take. Any suggestions? Thanks
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly
I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
Audio breaks/stops and continue playing randomly when 'Ram Previewing'
It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
Steps to reproduce BUG / issue:
1. create a new composition with a length of for example 5 minutes.
2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
4. insert the wave file in the earlier created composition which contain the animated solid or video file.
5. Set the work area bar (preview range) for the whole composition.
'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
AE has to stop rendering because there is no more space available in RAM.
make sure 'from current time' checkbox is off.
6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
(less then the green cache indicator on the right side)
8. "Purge image caches" or "Purge All"
9. Ram preview the now smaller work area
10. listen to the audio. The audio breaks are gone! (***Workaround***)
Additional information:
I have the latest After Effects CS5 update installed (10.0.1.19)
This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver, ASIO DirectX Full Duplex Driver)
I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
Reducing the amount of RAM which After Effects can access didn't solve the problem!
System:
Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
I also turned off AVG Anitivirus and Windows firewall for testing without success.
AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
Any help would be nice!
FelixYep, I agree with craulmedia....
It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
I bumped up this post 2 times and thanks to craulmedia for the third time.
And now here is my fourth time *BUMP*
All I got so far is: "I saw your bug report it's in the queue"
Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
But it started out so good in the first time...
Last 2 things I want to add here:
1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max. -
How to make a button to stop and run a for loop?
How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.
Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time . -
When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766 -
I downloaded an album but one of the songs is corrupted, it only plays for about 4 seconds. When I try to re-download using the iTunes Store and "Purchased", it won't give me the option to download it again. How can I get the song I PAID for!!??
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Why view have no stored data ? And what is the reason view take more time
Why view have no stored data ? And what is the reason view take more time to query ?
what happen if a view have stored data?user12941450 wrote:
I want to know the reason that why querying view is slower then querying a normal table?..Untrue.
For example take a table with 2laks record and a view for that table.
If i make a query like( Select name,address from table) then it works fast then select(name,address)from view..Incorrectly interpreting the results.
A view is a SQL statement. Only difference is that the SQL statement is stored in the database's dictionary. Let's consider the following view:
create or replace view foo_view as select * from empWhen you use the view as follows:
select * from foo_viewOracle sees it as follows:
select * from (select * from emp)This is no slower, or no faster, than providing the following SQL to Oracle:
select * from empSo if you observe a difference in performance between using plain SQL versus using that same SQL via a view, there are other reasons for that difference in performance. The reason is NOT that views are slower. -
Videos stopping and starting every three to five seconds
I am having problems downloading videos from U Tube and msn. I can't even download videos from the Apple Site. The videos from U Tube stop and start every 3 to 5 seconds. They resume after 3 to 5 seconds. I have downloaded the latest version of QuickTime. I have gone into preferences-advanced and changed the transport setup to custom; set transport protocol to http and post to 80. I have also clicked on the streaming tab; set the speed to one lower than the ISP connection and move th enable instant on slider 2-3 bars from the left. What else can I try?
There is currently no official version of MSN Messenger for Mac that supports video, unfortunately-- you might try aMSN instead, but I haven't used it myself so can't comment on the video support:
http://www.amsn-project.net/
However, the built-in camera works fine for me on Skype (and Yahoo last time I tried, which was a while ago), which suggests something else might be wrong somewhere... -
we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?
Each phone needs to set its own sync settings on the various tabs in iTunes. On the Apps tab, for example, uncheck the apps that you don't want on the phone being synced. This article may also be of interest: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/.
You can change the Apple ID used for purchasing on her phone by going to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using her Apple ID. However, be aware that if she has any apps on her phone purchased with your Apple ID she will still be prompted to enter the password associated with this ID for all future updates of these apps. This is because apps are permanently tied to the Apple ID used to purchase them, regardless of the ID in Settings>Store. -
My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!
DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work
-
When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying
You need to do as provided - contact iTunes Store support.
http://www.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
im trying to dowload the newest version of itunes, and when i click download it takes me directly to the thank you screen without downloading anything. what do i do?
-
Where to place crossdomain.xml in SAP ECC IDES?
Hi, I have a flex application which uses webservices generated in SAP IDES system. This flex app is stored in portal server. Since the physical servers are involved, I get a security error message, which says, "Security error accessing url". I browse
-
My ip5 auto restarting itself lately, how to stop this problem?
My ip5 auto restarting itself lately, how to stop this problem?
-
Ripping DVD's: what to do about special features
What do you guys do about special features on DVD's? I rip everything to my drives, but then the AppleTV becomes a clutter of entries...
-
Drag and Drop - image of draggable item is not near mousepointer
I have created pane where you can drag contact into a group, everything works fine but the drag image is not always at the same spot as the mouse pointer is. As visible in the image: Drag image. These contacts are in a VBox: <mx:VBox id="summariesCon