Where and When Should I Buy My 2GB Crucial RAM?

hello all,
I'm recently getting an iMac G5 and want to upgrade to 2GB with crucial memory. I'm wondering where or when I can find the best deals on them. If anyone knows it, please let me know. Thank you very much.
(does this question violate the rule on this board? please ignore this post if it does)

Buy it directly from Crucial.

Similar Messages

Where or when should I buy the 3gs?

I have not pre-ordered yet, and I've read lots of articles talking that pre-orders have sold out. I live in a less congested area and there is a Best Buy Wal-Mart and AT&T store where I am, (Fort Smith, Arkansas). However, I have other things to do Friday, and couldn't be at either one of those until probably 10:30AM. Should I pre-order from Apple Online today or tomorrow? Or do you think, if I walk into an AT&T store cold halfway through the morning Friday that I should be able to get one since in a smaller area?

Awesome, thanks for the info. I called with the nearest Best Buy since it's an hour and a half away. They couldn't do pre-orders over the phone, but I have a co-worker going up there so I asked if he had my ID if he could pre-order it for me when he pre-orders his own, and they said yes!! Looks like reserving at Best Buy is the route to go as they are guaranteeing 100% that if you pre-order it you will have it Friday!

When should I buy a new battery?

I've had my macbook for 8 months, I'm just wondering when should I buy a new battery?
The cycle count is 310, and checking System Profiler, the battery full charge is 5143.
Should I buy a new battery in a now, or should I not worry about buying a new battery, because I heard 310 cycles was a lot.

The question really isn't how many cycles your battery has, it is how long your full charge is lasting on a calibrated battery. If you've calibrated your battery within the last 60 days and you are getting less than 2 to 2 1/2 hours on a full charge then it is time to get a new battery. If you are getting 3 to 3 1/2 hours you are fine, regardless of your cycles. If you are in between decide if the $125 or so is well spent to get 4 hours or so.

How to know where and when my account logged in by...

Recently my account was used by someone and sent out a misleading message, which cause a great trouble to me. I sensed the one was in purpose. Can I check where and when my account was used on that date? How? Please help !!! waiting for your reply...

hi dominic.
thanks for the help and the links.
there is something terribly lacking in mac UI with respect to this unless i am missing something. if i do a search in Spotlight i see results and even when i see the file i want to know something about i have to OPEN FINDER which shows a ton of results (including hundreds if not thousands of eml file that i have to call mac and probably pay to find out why they are still showing up when prefs in Spotlight say to not show them...) and only then can i actively select the file and have it show a file path at the bottom of the finder window.
this is maddening. isn't there an option to show this information in Spotlight or to show this information WHEN THE FILE IS OPEN (apologies for the caps). i mean, if i have a file open, maybe i don't know /where/ it came from for some reason.
for instance, if i am in a hurry and i open the file directly from Spotlight i can edit it and save it but i still have no idea where it resides on my hard drive. similarly if i open a file directly from spotlight and DUPLICATE a file and i want to save it as Version 2 - i have to - - - - well i guess i have to run another search for the file i just opened and am working upon in order to just save the dang file to the same location the original is in?
i mean, the links are showing that i should open Get Info but i think i need to see the file in finder to run this command anyway since i have to right click on the file itself.
maybe i am missing something but can't MAC OS just show me the FILE PATH at the top of the document like it does in Finder and also show me the FILE PATH in Spotlight? seems like the current implementation is like a big game of hopscotch for no good reason except the information is not shown to the (power) user.
maybe i am missing a new feature in ML or in Mavericks or maybe i am using the wrong terms in the original title?
THANK YOU

E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN

When should I use static variable and when should not? Java essential

When should I use static variable and when should not? Java essential

Static => same value for all instances of the class.
Non-static => each instance can have its own value.
Which you need in which circumstances is completely up to you.

What is a Transient Variable and when should it be used

Hello everyone,
I just want to know the details regarding the transient variable and when should we use it. what is the significance of this variable?

Transient variables are not written out when the class is serialized.
http://java.sun.com/docs/books/tutorial/essential/io/providing.html

RT - PID Gains - where and when to use them

The attached is example code for controlling a temperature chamber. The question is where and when to use PID Gains? This code looks as though the PID Gain is used for the variable/parameter temperature (i.e. the temperature is the controlled variable).
So would there be just one PID Gain per controlled variable/parameter (temperature in this case) or would each device controlling temperature in the system get a PID Gain?
In this example, the fan and lamp are controlling the temperature.
Attachments:
Exercise 8-1.zip ‏171 KB

Russ_in_Louisville wrote:
I came here for help as this is where NI pointed me in their failure. I did not come here to get my "mental model" attacked.
Can you accept that your model of the system might be wrong, though? In this thread from a few weeks ago, multiple experienced users told you that what you had on your block diagram was an array, and yet you insisted - repeatedly - that what you had was a cluster. Your model was that the item on the block diagram was a cluster, leading to the question "how do I get an index display on it?" which made no sense, because the item was in fact an array. And, when you finally realized you were wrong, you couldn't even admit it or thank the people who pointed out your error - it just "turned out" that the constant wasn't what you thought it was. I am trying to tell you that you are making a similar error here by asking questions about the system that do not correspond to what the system actually does.
"Parameter/variable" isn't clear. There is correct terminology. A PID controller has, as inputs, a process variable and a setpoint. The process variable is the parameter you want to control, such as temperature. The setpoint is the desired value of the process variable. Let's say you do have a temperature control system where there is both a heating system and a cooling system (again, not the situation in your sample code). The two systems could both be driven by PID and share the same setpoint and process variable. Some control options for this system:
- a single PID controller with one set of gains, where a negative output drives the cooling system and a positive output drives the heater (or some variation on this), if both the heater and chiller have similar performance characteristics.
- two PID controllers, each with a set of gains, one controlling the heating and one controlling the cooler.
- a combination of these two: a single controller with gains that are selected based on the setpoint or process variable, which is known as gain scheduling. The advantage to a single controller is that you'd never have the two controllers fighting each other.
You could also have a code that controls several similar processes (for examply, multiple identical temperature chambers). In that situation you could have a single set of PID gains but multiple controllers each with a different setpoint and process variable.
So there's not a simple yes/no answer to when you need a separate set of PID gains or an additional PID controller. It depends on the characteristics and design goals of your system. Does that help?

When should a subclass have its own fields and when should it use its super

When should a subclass have its own fields and when should it use its superclass' fields?
Hi, thank you for reading this post!
Let me use a specific example to ask my question.
public class BankAccount {
     private double accountBalance;
     public double getBalance() {
          return this.accountBalance;
public class SavingsAccount extends BankAccount {
     private double accountBalance;
     public double getBalance() {
          return this.accountBalance;
}In the bank account example, both BankAccount and SavingsAccount will have a method getBalance(). Therefore, they
both require a account balance field. My question is since getBalance() for both classes will perform the exact same
operation, when should I omit declaring the getBalance() method and the accountBalance field in the subclass, and
when should I include them?
My own thought is when we never have to instantiate a superclass object (e.g. an abstract class), then we place
common fields in the abstract superclass and have subclasses access these fields via protected getter/setters to
access the superclass' fields. This is the principle of reuse.
But when you do need to instantiate a superclass and the superclass does need to maintain its own fields, then
I would need to duplicate the accountBalance field and getBalance() method in the subclass.
Is my thinking correct or incorrect?
Thank you in advance for your help!
Eric
Edited by: er**** on 22-Aug-2011 20:19

er**** wrote:
If SavingsAccount inherit BankAccount.getBalance()...getBalance() would return BankAccount's accountBalance. This is NOT the correct result we want.Actually, I think it's precisely what you want.
We want getBalance() to return BankAccount's accountBalance when we use a BankAccount object, and SavingsAccount's accountBalance when we use a SavingsAccount object.I seriously doubt that. I think you're confusing a BankAccount with a Customer, who can have more than one account.
In every system I've ever seen, a SavingsAccount IS-A BankAccount - that is to say, it's a genuine subtype. Now, it may well contain other fields ('interest'?) that a normal account wouldn't, but 'balance' ain't one of them.
Winston

Can anyone tell me where and when SAP IS life sciences training is offered?

Can anyone tell me where and when SAP IS life sciences training is offered?

Dear Hari,
Pls explore following URL;
http://www.sap.com/services/education/catalog/industry/lifesciences.epx
Bye and all the best,
Muralidhara

Hi , I live in Pakistan , please tell me that from where and how can I buy original iPhone 5 ?

Hi , I live in Pakistan , please tell me that from where and how can I buy original iPhone 5 ?

There are multiple reasons why the update failed, unless you can provide an error message/code that came up then nodbody will know.
Now your iPhone is in recovery mode and will now need to be connected to a computer with iTunes and restored to factory settings. This will install the update at the same time.
If you have a back up of the iPhone before the issue occurred then after the restore to fqactory settings you can restore the back up to the iPhone. If there was no back up then I'm sorry your data is gone.

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?*

What is the difference between saving to "Documents" and "Macintosh HD" and when should you use each one?

When you save to the folder with the little house icon, the file is placed at
/Users/your_user_name/
You would really have to go out of my way to save at:
(the shortcut for the Boot Drive, regardless of its name).
I am not sure how you decided that Time Machine is not saving your files. The default is for Time Machine to do incremental Backups of everything on all attached drives, except for certain temporary information in Cache files. If you have four Users, Time Machine will back them all up.
Looking at the raw Time Machine backups will tell you very little, because it does lots of its work with Hard Links, and because it does incremental backups, so only files that changed since the last Backup are saved at thet cycle. The way to determine whether Time Machine is saving things is to display the window you care about in the Finder, then invoke the "Star wars"/ "Back, back, back in time" Interface.

I'm trying to buy a book. The book is made in I-Photo and when I push buy book button it starts to process and than says-- There was a problem communcating wit the apple store " help"

I'm trying to buy a book I made in I-photo. I have made a 20 page book in I-photo and when I push the "buy book" button it starts to process and then pops up a sign that say'es There was a problem commucating with the apple store. Please try again. Help

Are you buying from the correct Print Products Store? If you are using the wrong store, your AppleID may not be valid.
Is the Print Products Store set correctly in iPhoto Preferences > Advanced? It should be set to the same country as your billing address and delivery address, and match the settings of the Apple ID you are using.
And you are using iPhoto '09 or '11, right? you can no longer buy books from earlier versions.
When you reenter your settings as LarryHN described, don't forget to enable Express Checkout. It is required.

When should i buy a iMac?

I have been wating for a while to buy a iMac. Some sources say it will come out sept. 12, others say october, or even early 2013. i really need one now but should i buy now though? i mean what happens when i buy one now but then the new one comes out in october?

Don't buy anything from Best Buy.
But what about the new model being so close, i just dont want to regret the buy.
No one knows about any new models. Significant upgrade cycles for Macs has historically been on the order of every year or so. There is no guarantee that will continue though.
"so close" is not significant for a computer that will serve you well for several years.
If you decide to buy from Apple they have a 14 day, no questions asked return policy. Should you buy a new Mac and another one comes out during that short period, you can return it for a full refund and buy the latest.
There's nothing wrong with using your existing computer. Replace it when it no longer does what you need it to do. If that happens to be now, you have your answer.

How to use Service Broker, where and when we gonna use it.

Hi all,
I have task to implement SQL service broker for some insert statement, am bit confused where i start and how to implement like it may in Database or Server side(ASP.Net- c#), some where.
What the main advantage of using SQL Service broker?
Thanks,
Jai.

There is more than one place where Service Broker fits in. Generally, one can say that Service Broker permits you to implement things asynchronously. For instance, when a row is updated in a table a mail should be sent to someone. Rather than having a trigger
that sends the mail on the spot, the trigger could post a message on a Service Broker queue. Then there could be an activation procedure which reacts to this message and composes and sends the mail. This activation can be in the same database - but it can
also be on a completely different server which does not even have a direct connection to the actual server.
Activation can also be external. That is, there is an application that polls the queue, and again this could be on an other server, and when there is a message in the queue the application processes it.
Roger Wolter's book is an excellent introduction to Service Broker:
http://www.amazon.com/Rational-Server-Service-Broker-Guides/dp/1932577270/ref=sr_1_1?ie=UTF8&qid=1420025225&sr=8-1&keywords=Roger+Wolter+service+broker
Also, don't overlook Remus Rusanu's blog, which is an excellent resource for development patterns with Service Broker:
http://rusanu.com/?s=service+broker
Both Roger and Remus worked on the development of Service Broker, so they know what they are talking about.
Erland Sommarskog, SQL Server MVP, [email protected]

Where and When Should I Buy My 2GB Crucial RAM?

Similar Messages

Maybe you are looking for