Where are these api's stored in the database for apex?

I don't know if my version of APEX has the apex_util.edit_user API. Can You tell me how I can find it?

Forgive me if I'm reading this wrong here, but I suspect that you have the validation the wrong way round.
Firstly, I am assuming that when you say "validation" you mean the in-built apex validation items, rather than some custom process. If so, validation messages are only triggered upon failure i.e. if you want the validation to check that passwords are exactly 8 characters long, the validation should be: length(:P90_PASSWORD) = 8 This means that passwords which are 0-7 or >8 characters in length will fail the validation and thus trigger the validation failure message.
Remember: the purpose of apex validation is to confirm validity - not find invalidity - and thus should be written accordingly. It's a subtle distinction but important!

Similar Messages

Where is QM notification "status" stored in the database?

I would like to see the value of status. In which database table is stored?
Thank you very much.

Table JCDS holds the status codes and TJ02T contains the text for the
status code.
When reading the JCDS table, object id for notifications will be QM +
notification number. Be sure to sort your results by udate and utime to
find the latest status for the order because this table contains all
status' ever applied to the order.
Also
Status are stored in table JEST. Connection is found by field OBJNR which is in QM case simply QM and the notification number. But in QMEL you should find field OBJNR. From JEST you can go further in TJ30 for user status or in TJ02 for system status

Where are radio program downloads stored?

Where are radio program downloads stored on the iPad?

I am lost. I don't even see the reply tab to answer I hope this continues the conversation.. I frequently listen to radio talk shows that have already been broadcast. I have the option of listen or
download. The first option doesn't work so I always click on download. I assume the downloads are piling up so I wanted to delete them but I can't find them stored anywhere on my iPad. Where are they?

Where are these unix executable files coming from and how do I recover the original text file?

where are these unix executable files coming from and how do I recover the original text file?

When you upgraded to Lion did you have AppleWorks installed on your mac?
Most of the AW documents can be opened by Pages 09 or Numbers 09 with most of the orginal format in tact. (I do not know if previouse verision will work) just open the AW file with both and see which one works best.
Text Edit will also open most of the AW files as well but will require a lot of work to restore them to their orginal format.
If you have AW Database documents then they are not supported.
These document show up as "exec icons", Kind: Unix Executagle File.
They also will show up as .cwk file if they are small files. I have a couple that were under 1mb that are shown as " Kind: AppleWorks Document" but will not open.
The only option to open AW database is to have AW installed on a mac with a pre-Lion OS to recover the file.

I'm watching the tutorial videos. The speaker references downloading the "sample files". Where are these on the video page?

I'm watching the tutorial videos. The speaker references downloading the "sample files". Where are these on the video page?

Create complex shapes and refine your illustration | Learn Illustrator CC | Adobe TV

I don't know where to find my photos that are supposed to be stored on the "cloud". I don;t want to erase them until I can locate them.

I don't know where to find my photos that are supposed to be stored on the "cloud". I don't want to erase them from my iPhone until I can locate them. I'm out of storage.

Welcome to the Apple Community.
Only photos in photostream are kept in the cloud and only for 30 days. To save your photos before deleting them, sync them to a computer or an online storage solution such as Dropbox.

I have just restored data from an external hard drive, but half of my iTunes songs are getting the error "original file cannot be located." Where are these files?

My Windows 7 PC just had to be reformatted, and I have retrieved all of my files from an external hard drive. About half of my iTunes library is working fine, the other half pop up the error statement "original file cannot be located." If they haven't come off my external drive, where are they?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Where is the enjoylogo.gif stored in the database

Can anyone tell me where these type of files are stored in the database? Are they in a table?

If you have 2 lists, List A contains custom names, List B has a lookup field that points to List A. I go into list B and select a client name ("Contoso"), enter some info, and save it. On the back end, the list item will contain a value of something like:
34#;Contoso
In this scenario the 34 is the SPListItem.ID value of that item in List A. They start at 1 in each list and increment by 1.
Also, running queries against the database directly is not supported and can take your database out of Microsoft's supportability.
Dimitri Ayrapetov (MCSE: SharePoint)

Where are Answers and Dashboards stored?

If we deliver answers and dashboards to customers and they customize it further, how can they upgrade to next release's dashboard and answers?
I want to know where are dashboards and answers stored so that we can provide an upgrade script.
Edited by: user732932 on Nov 17, 2009 10:58 AM

Hi User,
If a user creates queries and dashboards they are stored in the Catalog, this is in the OracleBIData>Web>Catalog folder. If you drill down into thsi folder you eventually come to the individual xml files.
The repository, (.rpd) is in the OraceBI>Server>Repository folder, the two can be maintained independantly. If your customer wants new data sources or tables adding to their RPD, you can merge these changes using the Admin tool, any changes here will not affect existing content in the dashboards, as long as the existing presentation layer is not altered. Assuming they do not maintain the rpd themselves, they could just send you an existing one for you to edit then replace theirs?
What it sounds liek you are saying though, is that they will have added queries and dashboards to the web catalog, and that you will then add more queries and dashboard pages to a development catalog, in this case it's very easy to copy and paste new files from one catalog to the other using the catalog manager. Ther is no need to touch the actual xml. NEVER copy a new catalog over an existing catalog, if you are replacing the whole catalog, back it up then delete it from the Catalog folder and paste in the new one.
If you are upgrading the version of OBIEE, none of these items should be affected, make sure you back-up first.
I hope this clears it up.
Regards
Ed

Where are flash player parameters stored?

Hello,
when we modifiy our parameters for flash player here: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
where are these parameters stored in the computer? because i want to delpoy my parameters on all the computers in my enterprise.
Thanks
PS: Sorry for my bad English, i speak french

It depends on the settings. Some you can control, some you cannot.
What you need is the FLash Player Admin guide:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
That will help you figure out how to reach your goal of adjusting settings network-wide..

Web Folders, where are files and content stored?

When files/content are added to Web Folders, via Portal, where are these files stored? In the database? file system?
Thanks in advance for any answers!
~Chris

Thanks for your reply Sandeep,
So I assume a hot or cold back-up of the database/MRU will also backup all Portal content?

Where are iTunes sync settings stored?

After upgrading to iOS 6 on my iPhone 4, the sychronization settings it iTunes appear to have been reset on my Macbook Pro. Another strange thing about this "reset" is the only settings affected were those for Music and Video.
I had updated several apps on the Macbook and needed to sync those apps to my iPhone, as well as a couple purchased on the iPhone since my last sync with the Mac. So ... I connected my iPhone to the Macbook, and after reconizing my phone the "Sync" button became activated. Since I was on the Summary page, I suspected no changes, as I had made none, and the Capacity bar was full to about .2GB Free, as expected. I pressed the "Sync" button as usual.
Somewhere between steps 1 and 2 (or during step 2), the Capacity bar dropped to Green, Yellow and a sliver of Orange with 23.2GB Free?!? Whassup?? As there was no method (I am aware of short of powering down the laptop) to pause/stop sync in progress, which I suspect would be dangerous anyway, I was forced to let it complete. After it finished. I checked my iPhone and the music and videos had all been removed. When I examined the sync settings in iTunes, I noticed the Sync Music and Sync Movies check boxes were selected. All other check boxes below them for Music: Playlists, Artists, Albums, Genre, Include music videos; and Movies: Movie Names, had mysteriously been unselected.
Since all my files are still in the proper folders on the Macbook Pro, and I use Time Machine, I am not concerned about file loss. What I am concerned with is how did this happen and where are these settings stored, so I do not have to go through ehem all and reselect each and every one to prevent this from recuring in the future. The technician and his manager could not find the location of these settings, as we tried replacing an older version from Time Machine to no avail.
Could anyone please tell me where the Synchronization settings in iTunes are stored, so I might be able to recover the proper file and not have to reselect each sub-selection to return my music and videos to the iPhone? I can Restore my iPhone from the backup just prior to the Sync; however, these does nothing to prevent the incorrect iTunes Sync settings from removing my music and video next time to transfer/sync upgraded apps.
Thank you in advance for your assistance. For more details see below regarding OS, iTunes and iPhone versions.
Sincerely,
Wynne Hunkler
OS:          10.7.5 (Lion)
iOS:          6.0 (10A403)
iTunes:     10.7 (21)

I think the device stores those selections along with which library they belong to. That's why you get the prompt to erase and reload with a different library. If you had restored the backup taken immediately before the upgrade that would probably have restored your selections.
tt2

Unresolve classes - significance? Where are these classes?

Hello,
Does it mean I cant use any of these methods? as they are listed
as the status when I loaded xmlparserv2.jar via loadjava. Where
are these stored if not on xmlparserv2.jar? I am able to run
xsutest.sql and it seems to execute okay. However, I still can
not run the paginating samples, where one scroll or sample no 6
the one that uses oracle.xml.sql.OracleXMLNoRowsException.
ORA-29521: referenced name oracle/xml/sql/dml/OracleXMLSave could
not be found
ORA-29521: referenced name oracle/xml/sql/OracleXMLSQLException
could not be found
ORA-29521: referenced name oracle/xml/sql/query/OracleXMLQuery
could not befound
ORA-29521: referenced name
oracle/xml/sql/OracleXMLSQLNoRowsException could not be found
ORA-29521: referenced name oracle/xml/sql/query/OracleXMLQuery
could not befound
ORA-29521: referenced name oracle/xml/sql/dml/OracleXMLSave could
not be found
ORA-29521: referenced name oracle/xml/sql/OracleXMLSQLException
could not be found
errors : oracle/xml/xsql/actions/XSQLInsertRequestHandler
errors : oracle/xml/xsql/actions/XSQLQueryHandler
errors : oracle/xml/xsql/actions/XSQLRefCursorFunctionHandler
errors : oracle/xml/xsql/actions/XSQLInsertParameterHandler
loadjava: 7 errors

I have the oracle 8.1.7 on SuSE Linux. Okay, I didnt recall
which loadjava capture I have done those, but the point of my
question is still, does it mean those methods that could not be
found are not available for to call from java? Also, I noticed
that a lot of the classes are already resolved, I assume it is
loaded the first time I loadjava them in?
Which version of database are you using? Also, please see my
comments below.
Hello,
Does it mean I cant use any of these methods? as they are listed
as the status when I loaded xmlparserv2.jar via loadjava. Where
are these stored if not on xmlparserv2.jar? I am able to run
xsutest.sql and it seems to execute okay. However, I still can
not run the paginating samples, where one scroll or sample no 6
the one that uses oracle.xml.sql.OracleXMLNoRowsException.
ORA-29521: referenced name oracle/xml/sql/dml/OracleXMLSave could
not be found
ORA-29521: referenced name oracle/xml/sql/OracleXMLSQLException
could not be found
ORA-29521: referenced name oracle/xml/sql/query/OracleXMLQuery
could not befound
ORA-29521: referenced name
oracle/xml/sql/OracleXMLSQLNoRowsException could not be found
ORA-29521: referenced name oracle/xml/sql/query/OracleXMLQuery
could not befound
ORA-29521: referenced name oracle/xml/sql/dml/OracleXMLSave could
not be found
ORA-29521: referenced name oracle/xml/sql/OracleXMLSQLException
could not be found These classed are in xsu12.jar(or xsu111.jar)
errors : oracle/xml/xsql/actions/XSQLInsertRequestHandler
errors : oracle/xml/xsql/actions/XSQLQueryHandler
errors :
oracle/xml/xsql/actions/XSQLRefCursorFunctionHandler
errors : oracle/xml/xsql/actions/XSQLInsertParameterHandler
loadjava: 7 errors These classes are in oraclexsql.jar.

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

HT4859 i backed up files created by documents app on ipad on icloud. where are these files?

I created a couple of files using free version of documents app on ipad. Now i want to transfer them to imac for furhter editing. I used back up on ipad to back up on icloid. I logged on icloud but cannot find these files. it gives me icond for mail, contacts, etc. where are these files stord on icloud? if i cannot get on icloud, what is the other way to get these files on imac?

Welcome to the Apple Community.
Which free documents app.

Where are these api's stored in the database for apex?

Similar Messages

Maybe you are looking for