Where can I get an OS 10.5 or higher for my iBook G4?

I have OS 10.4.11 on my iBook G4. I am trying to install a printer driver for a new home printer. The installer disk tells me I need an OS version 10.5 and above. Where do I get that version?

Even if the online Apple Store no longer offers a product, sometimes it can still be available through Apple Support.
The system requirements for Leopard can be found here:
http://support.apple.com/kb/HT3759?viewlocale=en_US
Amazon Marketplace has a few sellers who are selling it.
http://www.amazon.com/gp/offer-listing/B0012RAVRC/ref=dp_olp_new?ie=UTF8&conditi on=new
Just be sure to get the full Install DVD.

Similar Messages

Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion?

Where can I get current info on SysAdmin Certification(s) for Mac OSX SL and Lion? The Apple website for this is "under construction" for weeks now...
Thanks,
[email protected]

Certification test for OS X 10.7 Lion are not available yet. I assume they will be nearly identical to the test of 10.5 and 10.6. Hopefully, the reason the certification website has been down for a while is that they are updating it with the new information. Though I really wouldn't expect any 10.7 certification test to be available for 2-4 months. Peachpit Press didn't publish their training material for 10.6 until October even though 10.6 was released in August.
As far as the 10.6 Certifications:
Certified Support Professional, 10.6 requires the 9L0-403 exam.
Certified Technical Coordinator, 10.6 requires the 9L0-403 as well as the 9L0-510 (Server Essentials) exams.
The information for the Certified System Administrator, 10.6 is "hidden" on the integral7 website but according to this Wikipedia entry, you need to pass the 9L0-510 Server Essentials exam as well as these three:
Directory Services
Deployment
Security and Mobility

Where can i get the macbook pro (2010) bootcamp drivers for windows 7?

I recently decided to install windows 7 ultimate (32-bit) on my macbook pro (2010 model). However my macbook did not come with installation disks, i know this for a fact and it came pre installed with 10.6. And when i try to download the windows support files through bootcamp assistant, it says that the download cannot continue. So where can i get these drivers from?

All MBP's with Snow Leopard (10.6) came with an installaton disc, and that is where the drivers are, if you don't have (or didn't get) the disc contact Apple for a replacement, there is no downloadable version of BC3

I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

Hello,
I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
-1074397150 occured at IMAQ snap.vi
Possible reasons,
NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
Anyways, thanks,
Brian

Brian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com

Where can I get the Adobe Reader 11 .msi file for distribution?

I have a distribution agreement, but the only version available on the web site is the .exe file. Where can I get a copy of the .msi file so I can use the Customization Wizard?

Hi JackTatSykes
Download the reader X MSI from the below link : ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/
Reader XI : ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC SharePoint Foundation
        Runtime
tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()
at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
I searched online and found this:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious. It says:
We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU). The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC.
This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
David

You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Where can I get the Windows 7 64 bit driver for the MBP (6,2)?

I have to install Windows 7 for work. I have my hard drive partitioned for triple boot, with Ubuntu 64 bit on one partition, and Windows 7 64 bit enterprise installed on another. Both boot fine; Ubuntu found all its drivers automatically (well done, guys!), but Windows of course cannot. Boot camp assistant refuses to download the drivers because I've already partitioned the drive. (Pardon my frustration, but that is a completely brain-damaged software design decision. -1 to apple.)
Is there any way to get the drivers?? Even just for the wireless card?? This is unbelievably frustrating. It's 2011 - stuff is supposed to 'just work,' and playing coy little hide-the-hardware-driver games does not 'just work'.

Alas, no dice. I was able to skip the compatibility check and run the bootcamp installer, and the 3.1 and 3.2 updates. However, I still have no wireless. The device manage shows it as an unknown network card.
linux lspci identifies the ethernet and wifi cards as:
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
the ethernet card is recognized in windows, but the BCM43224 is not.
under linux the BCM43224 works out of the box using the standard "wl" driver with Broadcom's recently open-sourced firmware.
But I'm having a hard time finding any other Windows drivers for it: searching broadcom's site and windows support doesn't give me anything, and google just gives me loads of what look like pay-to-download scam sites and malware. Have I entered some weird parallel reality where wifi support is better in linux than in windows? :lol: that can't be, maybe I'm not configuring something correctly.

Where can I get hold of a replacement mains cable for a Mac Book?

It looks like we have somehow misplaced the mains cable for my Dad's MacBook. The big question where could I get hold of a replacement one ? I have looked on Apple's website but unless I am either blind or daft I can't see one. The only thing I can think of of is to drive to my nearest Apple store (some 60 miles away) which I don't want to if I can help it. Any ideas?
for what it is worth I live in Bradford West Yorkshire England
Thanks

Problem now solved. It was found in a completely stupid place.

Where can I get iPlanet Directory Server 4.1.3 for Linux

Hello everyone,
we are developing IMPS solution. but we need to support legacy system. How can we get a iPlanet Directory Server 4.1.3 for Linux for evaluation?
Many thanks
Billiken Xie

Why you want to have NDS 4.11? Any version of the NDS 4.1x will support Solaris 2.6 and 8. This version is nolonger available in iplanet's site. I suggest you to get NDS 4.13 or later version. At iplanet's web site, you will find the latest version, 4.16. Also, you will find 4.13 from Solaris 8's CD ording from Sun's reseller.
Lucas

Where can I get an aide memoir of unix commands for Terminal?

Like the title, does anyone know where I could get an aide memoir of unix commands?

Terminal Commands - 10
Terminal Commands - 50
Terminal Commands - 250
Terminal Commands - Secrets

Where can I get an Apple Hardware Test CD? (for a dual 867mhz G4 powermac)

My Powermac G4 Dual 867mhz is having issues. It either won't boot to the 10.5 server DVD, or if It does, it hangs with the spinning gear.
Booting to the 10.5 workstation CD works great.
The 10.5 Server CD is good, as I've tested it on my G5.
I want to use an Apple Hardware Test CD to do some heavy-duty scanning, but I bought this G4 off eBay and have no original CD's. Where can I find them?

Hi-
Download a copy of the AHT here.
Burn it to CD, and off you go.

Where can I get a replacement 250 GB SATA HD for my 2006 MacPro (UK)?

AppleStore UK can no longer supply these. My existing HD has lasted for 6 years and if possibly I want to get an Apple replacement, or equivalent.

Thanks Kappy.
However I was under the impression that the maximum capacity woukd be 500 - 750GB: http://support.apple.com/kb/SP30.
Also could you please clarify the height restriction to which you refer, as the MacPro is not a notebook/laptop but a 'tower' design.

Where can I get the Dreamweaver CS 5.5 extension for Business Catalyst?

I have CS 5.5 on windows 7, and am starting my Business Catalyst account, but also want to integrate with Dreamweaver.
When I open my Business Catalyst panel in DW and click the "Get Extension" Button, I get a "Page Not Found".
I have searched Adobe support, and Exchange, but can't seem to locate it.
Is it still available?
Thanks.
Scott

Hi Scott,
You can download it from here: http://www.businesscatalyst.com/support/dw
Let us know if you run into any problems.
Thanks,
Florin

Where can i get a full listing of possible parameters for LAUNCH()

the reference page only talks about http.
I know of tel to launch Skype audio.
then there is also a syntax for launching Skype video.
what else is there?
gladly appreciate if this is out in the open. thanks.

Hi chavsraul,
Since Uri are being added on a regular basis by Software Companies everyday, there is currently no exhaustive list available but you can launch any Uri that is not in the "local zone".
To launch Skype, simply use Launch("Skype:"). Skype also supports additional parameters you can pass via the Uri. For example to call John Smith (assuming he is in your contact list) you can use:
Launch("Skype:JohnSmith")
Please see Skype URI API reference
for additional information about the type of parameter the Skype Uri supports

Where can I get a physical legitimate copy of tiger for my preowned iMac ppc swivel?

I feel like a collector, or rather Dr Frankenstein... she doesn't boot up. Keeps asking for disc 1 - can this be solved? I cannot find a copy to purchase in the store, is that it then? Hoping it aint... Cheers

If your iMac is the iMac G4 "swivel lamp" or "snow ball" base style iMac, you need to tell us the year, screen size and iMac model indentifier number located somewhere on the outside of the iMac.
The reason we need this info in the first year of these models came with a CD disc reading only drive as a base model.
Later versions of this style came with disc drives that could read both CDs and DVDs.
At any rate, you need to look on eBay or Amazon for black OEM retail copies of OS X 10.4 Tiger.
No gray colored discs will work.
You're looking for black discs with a large, silver "X" on them.
But we need to determine if you need CD discs or DVD install discs.
Here is another more expensive source for the discs you need.
http://fastmac.com/osx.php

Where can I get an OS 10.5 or higher for my iBook G4?

Similar Messages

Maybe you are looking for