Where can I get this Chinese keyboard for the X1 Carbon Touch?

I'm looking for this keyboard for the X1 Carbon Touch (3443CTO):
I believe it's sold in Taiwan, because it has the Bopomofo typing system, but I would mainly need it for Cangjie. So far, I think I've narrowed it down to two FRUs: 04X0479 and 04Y0819. Is it possible to install a Windows 7 X1 Carbon keyboard on a Windows 8 X1 Carbon Touch, ie. are they cross-compatible? Unfortunately, I don't know which one to purchase or how to order the keyboard. Any help would be appreciated, thanks!
Solved!
Go to Solution.

Hi breandan,
I have been quite busy lately with a startup i am running, so i didn't have time to contribute regularly on my ThinkScopes blog.
I think you can pop off the keys, but you may damage them in the process. I think it would work out easier and cheaper trying to procure the keyboard that you need from some other random sources. If you know Chinese, you can try 51nb.com forum, they have lot of odd parts retailer that can stuffs for you, and they are not that expensive either. Failing that call IBM Parts service and quote the part you need, and get it from them.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Where can I get an EPSON printer for the original iMac?

Where can I get an EPSON printer for the original iMac?

You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now. All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores. Ink tanks for the 740 series seem to be more readily available, without a special order. There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower. There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

Where can I get a new keyboard for my Tecra A3 in the UK?

I spilt some water - damn! - a couple of days ago on my Tecra A3 and I think it is beyond fixing, though please correct me if I am wrong.
I haven't been cleaning it regularly and I think there was probably quite a bit of dust - and other foreign matter - under the keys and I think some dust has got, via the water, into the electronics connecting the keys to the white connecting tissue - I don't know what you call this - which links the keyboard to the rest of the machine.
Most of the keys aren't working, and some of them, whey they work, add in for free, for one tap, extra letters.
I removed the keyboard, and left it and the machine to dry and, when that didn't do the trick, dried the keyboard and surrounding parts thorougly - working delicately - and cleaned it using a tiny bit of alcohol and ear cotton wool cleaners. I also used a little air pressure producing machine to try to get rid of any dust. I think I did a fair job but It is still not working.
I think I will have to buy a new keyboard. Do you know where can I get a new keyboard A3 in the UK or a second hand keyboard that would be in perfectly good working order?
Thanking you in advance,
Conor Joyce

Hi
On the Toshiba website you can search for the nearest authorized service provider. They sell all original Toshiba spare parts. Call them and ask for a new keyboard, they can order a new one for you.
Here you can search for the nearest ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
Second hands you get from eBay for example but normally keyboards are not so expensive so I would buy a new one.

Where can I get a replacement battery for the iBook G3 Clamshell M6411, in the UK?

I recently managed to source an Indigo iBook G3 clamshell - the M6411 FireWire model - from eBay.
It's in superb condition, but the battery has had it, and only holds about 5-10 minutes' charge.
Can anyone suggest where I can get a replacement? I guess I just assumed it would be easy, but everywhere I look online they're either sold out or cost a fairly large amount of money - I paid £50 for the laptop, which was a pretty good deal, and had hoped to get a battery for under £30 (as I've bought similar replacement batteries before for other laptops).
Also, are all the G3 Clamshell batteries the same? Or do the different models have different batteries?

Some items come up in a search for Mac parts UK; whether or not they have
an exact part match for any vintage product has not been searched...
Most that I have looked into, show any battery "out of stock" &/or listed "used."
A good electronics shop with an understanding of how these batteries are wired
in their case (and any controller chip circuitry) should be able to install new cells
inside the case; however opening these may present a problem if done forcefully.
http://www.thebookyard.com/
http://www.applemacparts.co.uk/store/index.php
http://www.theappleshack.co.uk/
In the US, wegenermedia.com, powerbookmedic.com, & others may know of stock.
So far, I'd struck out searching; could be one may need to contact long standing
Apple specialists & those who repair vintage models, to get refurbished batteries.
Perhaps there is a message board or User Group site where one could try & contact
Apple users; of those some may know of a source, or an individual capable of repair
since these battery units have been refurbished before with new rechargeable cells.
Sorry to not be of exact help in this matter.
Good luck & happy computing!

HT3302 Where can I get a screen replaced for the new ipad?

Do apple repair screens for the new ipad?

Apple does not repair iPads, but if the screen has been damaged due to accident will replace the entire iPad for a flat fee. If you have AppleCare+ on the iPad, the cost will be relatively minimal; $49 in the US. Otherwise, see the Repair Pricing section here:
http://www.apple.com/support/ipad/service/faq/
There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair". You can also look for parts and instructions and do the repair yourself. Note, though, that if you elect to have the iPad serviced by an unauthorized shop or perform your own repair, you will get no further support from Apple.
This is the iPod touch forum, by the way.
Regards.

Where can I get a pin diagram for the BNC-2120 DAQ Boaard?

I am using a NI BNC-2120 DAQ Board and a couple of the pins seem to have been damaged. I was looking for a pin diagram to so that I can check to see what these pins correspond to and if they could be contributing to some of the unusual readings we are getting.

I'm assuming that the damaged pins you are referring to are on the back of the connector block where the cable plugs in.
The BNC-2120 Accessory is able to be used with several different families of data acquisition products, and therefore the meaning of the pins could possibly depend on which particular data acquisition device you are connecting to the BNC-2120.
You can find many of the generic pinouts for E series 68-pin devices in the DAQ-mx Help:
http://digital.ni.com/manuals.nsf/websearch/95ADFF85ABA7853986256D8800668AE2?opendocument
If you are using an M series device, the following lists its corresponding pinout, which is nearly identical:
http://digital.ni.com/public.nsf/allkb/61ED77983AD7CCA386256F66008215F1
If you let me know which device you are using and which pins you suspect are damaged, I could give you more information on what effect it might have.

Where can I get a white screen for I pod 4 touch near Dorchester,Uk.My i pod 4 screen has broken and am looking for a genuine screen for it.

I have an i pod touch 4 and the screen has broken due to being dropped.I am willing to repair it myself in order to keep the cost down.Now I am looking for a genuine screen for it and would like to know where to get it as cheap as possible.

You're very welcome.
What seems to be unfair is I can buy that motherboard directly from HP in the USA as you saw, but for whatever reason you can't buy it directly from HP in the UK.
I still think you would be better off checking out what related notebooks may be for sale out there on eBay UK.
I buy all my PC's on eBay in used condition for great bargains. I do limit myself to the business PC's and notebooks that HP makes, however.
Best of luck in whatever you decide to do.
Regards,
Paul

Where can I get a replacement cover for the bottom of my MacBook?

I am looking to replace the plastic cover on the bottom of my MacBook. The seal has broken and it is beginning to separate from the sides. Any suggestions? Can I buy one of these covers from Apple directly?

google is always a good way to check, but before you do that, read this and see if it applies to your model: http://www.apple.com/support/macbook-bottomcase/

Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane

Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane
Thanks
Ftcukoz

Hi,
The brochure says only available in the US or North America only:
http://www.hp.com/hpinfo/newsroom/press_kits/2011/InnovationforImpact/OJ8600_Series_FeaturesGuide.pd...
But you can order from the following shop:
http://www.techbuy.com.au/p/186748/PRINT_ACCESSORIES_PAPER_TRAYS/HP/CN548A.asp
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS3649 my mac (2012) did not come with idvd.where can i get this program for download?

My iMac os lion 10.7.2 (2012) did not come with idvd program. Where can I get this program for download?

Hi
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
• iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
• DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
• Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
• Burn - a free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
• Free DVD Creator.app - free from Apple Store
• FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Yours Bengt W

Where can i get a printer driver for my kodak hero 3.1 printer for my macbook

where can i get a printer driver for my kodak hero 3.1 printer for my macbook

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

Where can I get a replacement screen for my iPod touch?

Where can I get a replacement screen for my iPod touch?

Uer have been pleased with this place:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
There are many complients about this place. You can Google and find many.
DigiExpress.us - The iPad Repair Professionals

Where can I get a downloan link for Acrobat 9 to put on my home computer?

Where can I get a download link for Acrobat 9 to put on my home computer?

As long as you have a serial number you should be able to download it from this location:
http://www.adobe.com/downloads/other-downloads.html

Where can I get a bluttooth driver for my ipad minm and windows 7

Where can I get a bluetooth driver for my ipad mini and windows 7? Windows see and know the device but the ipad doesn't see win7. In troubleshooting, win7 say it doesn't have a driver??

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

Where can I get this Chinese keyboard for the X1 Carbon Touch?

Similar Messages

Maybe you are looking for